42 Matching Results

Search Results

Results: 1 - 24 next
open access

Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V

Description: Article reports the computational approach adopted for thermo-diffusion kinetics to rationalize homogenously distributed nanoscale vanadium-rich clusters formed within the martensite laths of Ti6Al4V alloy printed using laser powder bed fusion at an energy density of 52.08J/mm³.
Date: June 1, 2020
Creator: Pantawane, Mangesh V.; Dasari, Sriswaroop; Mantri, Srinivas Aditya; Banerjee, Rajarshi & Dahotre, Narendra B.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Laser surface engineering of B4C/Fe nano composite coating on low carbon steel: Experimental coupled with computational approach

Description: Article describes a study where laser surface engineering was successfully used to engineer a nano carbide composite coating on a low carbon steel substrate.
Date: February 19, 2020
Creator: Salloom, Riyadh; Joshi, Sameehan; Dahotre, Narendra B. & Srinivasan, S. G.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Microstructurally flexible high entropy alloys: Linkages between alloy design and deformation behavior

Description: Article presents research where metastability based alloy design led to flexible microstructural evolution in which either thermodynamically stable γ-phase or unstable ε-phase was obtained at room temperature.
Date: July 19, 2020
Creator: Nene, Saurabh S.; Frank, M.; Agrawal, P.; Sinha, Subhasis; Liu, Kaimiao; Shukla, Shivakant et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Spatial Decomposition of a Broadband Pulse Caused by Strong Frequency Dispersion of Sound in Acoustic Metamaterial Superlattice

Description: This article uses an acoustic metamaterial superlattice for the spatial and spectral deconvolution of a broadband acoustic pulse into narrowband signals with different central frequencies.
Date: December 30, 2020
Creator: Jin, Yuqi; Zubov, Yurii; Yang, Teng; Choi, Tae-Youl; Krokhin, Arkadii A. & Neogi, Arup
Item Type: Refine your search to only Article
Partner: University of North Texas
open access

Effects of UV Stabilizers on Polypropylene Outdoors

Description: This article looks at hindered amine light stabilizers (HALSs) and nano ZnO were used to stabilize polypropylene (PP) film-based formulations that were exposed to ultraviolet (UV) light for different lengths of time, simulating the harsh outdoor weather of Dallas, Texas, USA. UV doses applied in our laboratory are 121 times larger than the UV dose provided by the sunlight in Texas. 15 different compositions were studied. The combination of HALSs and nano-ZnO stabilizers makes the PP films harde… more
Date: April 1, 2020
Creator: Brostow, Witold, 1934-; Lu, Xinyao; Gencel, Osman & Osmanson, Allison T.
Item Type: Refine your search to only Article
Partner: University of North Texas
open access

Opportunities and Issues in the Application of Titanium Alloys for Aerospace Components

Description: This article describes recent developments, issues, and opportunities associated with the production and use of Ti and its alloys in aerospace components. Included are new Ti alloys, new applications of Ti alloys, and the current status of several manufacturing processes including a discussion of the promise and current reality of additive manufacturing as a potentially revolutionary method of producing Ti alloy components.
Date: May 27, 2020
Creator: Williams, James C. & Boyer, Rodney R.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Complex Concentrated Alloys (CCAs)—Current Understanding and Future Opportunities

Description: Article providing an overview of the special issue titled Complex Concentrated Alloys (CCAs) - Current Understanding and Future Opportunities. The published papers in this special issue aim to report on the current state of research in complex concentrated alloys (CCAs) as well as compelling future opportunities in wide ranging applications.
Date: September 15, 2020
Creator: Mukherjee, Sundeep
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Additive friction stir deposition: a deformation processing route to metal additive manufacturing

Description: This article outlines key advantages of additive friction stir deposition, e.g. rendering fully-dense material in the as-printed state with fine, equiaxed microstructures, identifies its niche engineering uses, and points out future research needs in process physics and materials innovation.
Date: November 24, 2020
Creator: Yu, Hang Z. & Mishra, Rajiv
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Achieving extraordinary structural efficiency in a wrought magnesium rare earth alloy

Description: Article describes development of an ultrafine-grained magnesium alloy with an extraordinary strength and ductility combination, exceptional high specific strength, zero yield strength asymmetry and excellent high strain rate superplasticity.
Date: January 29, 2020
Creator: Panigrahi, S. K.; Mishra, Rajiv; Brennan, R.C. & Cho, K. C.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Sol-gel synthesized indium tin oxide as a transparent conducting oxide with solution-processed black phosphorus for its integration into solar-cells

Description: This article describes the synthesis of indium tin oxide (ITO) thin films using solgel processing with a mixture of InCl₃, methanol, and SnCl₂, where the solutions were spin coated onto glass substrates. The combined architecture of black phosphorus on ITO thin films shows promise in its use for transparent electronics, which can also serve as a stepping stone for future solar cell platforms.
Date: October 9, 2020
Creator: Mehta, Ravindra; Min, Misook & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication and characterization of inkjet-printed 2D perovskite optoelectronic devices

Description: Article presents the large scale synthesis of solution-processed 2D (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)ₙ − 1PbₙI₃ₙ + 1 (n = 2, 3, and 4) perovskites, a family of layered compounds with composition-tunable bandgap, where inkjet printing was used to fabricate heterostructure, flexible photodetector devices. The flexible, inkjet-printed perovskite 2D heterostructures have significant potential for optoelectronic devices, which can enable broad possibilities with compositional tunability and versatility of the… more
Date: August 24, 2020
Creator: Min, Misook; Hossain, Ridwan F.; Ma, Liang-Chieh & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

3D-printed and injection molded polymer matrix composites with 2D layered materials

Description: This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological propert… more
Date: June 26, 2020
Creator: Gamboa, Gerardo; Mazumder, Sangram; Hnatchuk, Nathalie; Catalan Gonzalez, Jorge Alfredo; Cortes, Damaris; Chen, Ikang et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Correlation between bonding, vacancy migration mechanisms, and creep in model binary and ternary hcp-Mg solid solutions

Description: Article compares in-plane (IP) and out-of-plane (OOP) vacancy migration mechanisms in binary Mg–X (Ca, Y, and Gd) and ternary Mg–X (Ca, Y, and Gd)–Zn alloys using density functional theory based first principles computations.
Date: October 13, 2020
Creator: Paranjape, Priyanvada; Srinivasan, S. G. & Choudhuri, Deep
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

International Journal of Lightweight Materials and Manufacture

Description: This article employs a recently introduced magnesium-samarium oxide (Mg–Sm₂O₃) nanocomposite, with different volume fractions of nanosize Sm₂O₃ particles as reinforcement, to study ambient temperature rate-dependent plastic response of the material.
Date: May 11, 2020
Creator: Hasannaeimi, Vahid; Mukherjee, Sundeep; Haghshenas, M.; Song, X. & Gupta, D.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Prolate and oblate chiral liquid crystal spheroids

Description: Article examining the palette of morphologies that arises when microdroplets are deformed into nonspherical shapes in a controllable manner. Specifically, geometrical confinement and mechanical strain are used to manipulate orientational order, phase transitions, and topological defects that arise in chiral liquid crystal droplets. The reported structures and assemblies offer potential for applications in smart coatings, smart fabrics, and wearable sensors.
Date: July 10, 2020
Creator: Sadati, Monirosadat; Martínez-González, José A.; Zhou, Ye; Qazvini, Nader Taheri; Kurtenbach, Khia; Li, Xiao et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Hole-punching for enhancing electrocatalytic activities of 2D graphene electrodes: Less is more

Description: Article develops 2D carbon electrocatalysts based on graphene with and without punched holes and/or N-doping and performs a comprehensive combined experimental and theoretical study on the edge and surface electrocatalytic activities of single-layer 2D graphene sheets.
Date: August 17, 2020
Creator: Xia, Zhenhai; Gao, Yunxiang; Zhang, Lipeng; Li, Chang Ming & Dai, Liming
Item Type: Refine your search to only Article
Partner: University of North Texas
open access

Dynamic Shear Deformation of a Precipitation Hardened Al0.7CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry

Description: The article reports on the shear deformation of a eutectic structured HEA and effect of precipitation on shear deformation, particularly Al₀.₇CoCrFeNi high-entropy alloy (HEA). A split-Hopkinson pressure bar (SHPB) was used to compress the hat-shaped specimens to study the local dynamic shear response of the alloy. The change in the width of shear bands with respect to precipitation and deformation rates was studied. The precipitation of L1₂ phase did not delay the formation of adiabatic shear… more
Date: April 10, 2020
Creator: Gwalani, Bharat; Wang, Tianhao; Jagetia, Abhinav; Gangireddy, Sindhura; Muskeri, Saideep; Mukherjee, Sundeep et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen