UNT Libraries Government Documents Department - 5,738 Matching Results

Search Results

open access

1,2-HOIQO--A highly versatile 1,2-HOPO analog

Description: A cyclic, bidentate hydroxamic acid binding unit based on an isoquinoline scaffold has been utilized for the synthesis of a hexadentate tripodal ligand based on the TREN backbone. This prototype for a new class of multidentate chelators forms mononuclear iron(III) complexes and one-dimensional coordination polymers with lanthanide(III) cations. The latter has been determined by single crystal X-ray analysis of the cerium species. The solid state structure in the monoclinic space group P2{sub 1}… more
Date: August 7, 2006
Creator: Seitz, Michael; Pluth, Michael D. & Raymond, Kenneth N.
open access

1+ -n+ ECR Ion Source Development Test Stand

Description: A test stand for the investigation of 1+-n+ charge boosting using an ECR ion sources is currently being assembled at the Texas A&M Cyclotron Institute. The ultimate goal is to relate the charge-boosting of ions of stable species to possible charge-boosting of ions of radioactive species extracted from the diverse, low-charge-state ion sources developed for radioactive ion beams.
Date: April 7, 2006
Creator: May, Donald P.
open access

2 MV Injector as the Elise Front-End and as an Experimental Facility

Description: We report on progress in the preparation of the 2 MV Injector at LBNL as the front-end of Elise, and as a multi-purpose experimental facility for Heavy Ion Fusion beam dynamics studies. Recent advances on the performance and understanding of the injector are described, and some of the on-going experimental activities are summarized.
Date: December 7, 1999
Creator: Yu, S. S.; Eylon, S.; Henestroza, E.; Peters, C.; Reginato, L.; Tauschwitz, A. et al.
open access

A 3.3 MJ, Rb + 1 driver design based on an integrated systems analysis

Description: A computer model for systems analysis of heavy ion drivers has been developed and used to evaluate driver designs for inertial fusion energy (IFE). The present work examines a driver for a close-coupled target design that requires less total beam energy but also smaller beam spots sizes than previous target designs. Design parameters and a cost estimate for a 160 beam, 3.3 MJ driver using rubidium ions (A = 85) are reported, and the sensitivity of the results to variations in selected design pa… more
Date: March 7, 2000
Creator: Meier, W. R.; Barnard, J. J. & Bangerter, R. O.
open access

A 6.3 T Bend Magnet for the Advanced Light Source

Description: The Advanced Light Source (ALS) is a 1.5 to 1.9 GeV high-brightness electron storage ring operating at Lawrence Berkeley Laboratory (LBL) that provides synchrotron radiation for a large variety of users. It Is proposed to replace three of the thirty six 1.5T, one meter long bend magnets with very sbort high-field superconductlng (SC) dipoles. These magnets would provide bend-magnet synchrotron radiation to six bcamlines with a critical energy of at least 6 keV that is much better suited for pro… more
Date: June 7, 1995
Creator: Taylor, C. E. & Caspi, S.
open access

08-ERD-071 Final Report: New Molecular Probes and Catalysts for Bioenergy Research

Description: A major thrust in bioenergy research is to develop innovative methods for deconstructing plant cell wall polymers, such as cellulose and lignin, into simple monomers that can be biologically converted to ethanol and other fuels. Current techniques for monitoring a broad array of cell wall materials and specific degradation products are expensive and time consuming. To monitor various polymers and assay their breakdown products, molecular probes for detecting specific carbohydrates and lignins a… more
Date: March 7, 2011
Creator: Thelen, M. P.; Rowe, A. A.; Siebers, A. K. & Jiao, Y.
open access

A 10,000 groove/mm multilayer coated grating for EUV spectroscopy

Description: Ultra-high spectral resolution in the EUV and soft x-ray energy ranges requires the use of very high line density gratings with optimal design resulting in use of a Blazed Multilayer Grating (BMG) structure. Here we demonstrate the production of near-atomically perfect Si blazed substrates with an ultra-high groove density (10,000 l/mm) together with the measured and theoretical performance of an Al/Zr multilayer coating on the grating. A 1st order absolute efficiency of 13percent and 24.6perce… more
Date: February 7, 2011
Creator: Voronov, Dmytro; Anderson, Erik; Cambie, Rossana; Cabrini, Stefano; Dhuey, Scott; Goray, Leonid et al.
open access

15 KJ FLASH LAMP, POWER CONDITIONING UNIT DESIGNED FOR SAFTY, RELIABILITY & MANUFACTURABILITY*

Description: A 15kJoule, Flash Lamp Power Conditioning Unit has been successfully designed, developed, and deployed in the National Ignition Facility (NIF) Preamplifier Modules (PAM). The primary design philosophy of this power conditioning unit (PCU) is safety, reliability, and manufacturability. Cost reduction over commercially equivalent systems was also achieved through an easily manufactured packaging design optimized to meet NIF requirements. While still maintaining low cost, the PCU design includes a… more
Date: August 7, 2007
Creator: James, G.; Merritt, B.; Dreifuerst, G.; Strickland, S. & Tse, E.
open access

20,000 KW Nuclear Power Plant Study for United States Atomic Energy Commission

Description: Introduction: In September of 156, Gilbert Associates, Inc., entered into a contract with the United States of America, acting through the United States Atomic Energy Commission, for the study and preliminary design of a nuclear power plant being considered for integration into a central station power system at an overseas site.
Date: July 7, 1957
Creator: Gilbert Associates, Inc.
open access

25 Can Verification Report for the LLNL Plutonium Packaging System (PuPS)

Description: This document reports the results of the 25 Can Verification Run. The 25 Can Verification Run was performed as outlined in Section 1.d of SRS Acceptance Criteria (Reference 1). The run was performed over the period of February 16 to the 28, 2001. Each of these cans was welded with a dummy Inner Can containing about 5 kg of surrogate material. The cans were then analyzed using radiography and metallography of samples taken at four locations of the weld. The radiographs were examined for porosity… more
Date: May 7, 2001
Creator: Riley, D C & Dodson, K E
open access

80" Bubble Chamber Expansion System Preliminary Operating Procedures

Description: These procedures are intended to be used for the initial operation of the expansion system and serve as a basis for a more complete and revised form to be written once operating experience has been gained. An attempt has been made to offer a logical and systematic presentation to facilitate operation and maintenance of the system by the operating personnel. Thus, the sequence of valve actuations has been presented in matrix and check list form to minimize errors; this also has the advantage of … more
Date: January 7, 1964
Creator: Goodzeit, C. L.
open access

80" Bubble Chamber Expansion System Summary of Piston Motion Studies

Description: Prior to assembly into the 80" bubble chamber, the expansion system was subjected to a series of tests to check piston dynamics and gain information on the reliability of the various components. Furthermore, the rest provided operating personnel with the opportunity to become familiar with the operation and maintenance of the expansion system. Two separate tests were performed with the apparatus that was located at the north end of the AGS experimental area; one during the week of Oct. 15 and t… more
Date: January 7, 1964
Creator: Goodzeit, C. L.
open access

100 Areas technical activities report - physics, December 1946

Description: This report summarizes physics experiments carried out in different parts of the 100 area at Hanford during December, 1946. This included work on the D pile, F pile, and experiments aimed at studying the irradiation properties of graphite and metal samples exposed to different radiation environments. Pile tests included reactivity tests, calibrations of control rods, and power coefficient tests.
Date: January 7, 1947
Creator: Montgomery, E. B.
open access

225-B Pool Cell 5 Liner Leak Investigation

Description: This document describes the actions taken to confirm and respond to a very small (0.046 ml/min) leak in the stainless steel liner of Hanford`s Waste Encapsulation and Storage Facility (WESF) storage pool cell 5 in Building 225-B. Manual level measurements confirmed a consistent weekly accumulation of 0.46 liters of water in the leak detection grid sump below the pool cell 5 liner. Video inspections and samples point to the capsule storage pool as the source of the water. The present leak rate c… more
Date: June 7, 1996
Creator: Rasmussen, J.H., Westinghouse Hanford
open access

300 Area Disturbance Report

Description: The objective of this study was to define areas of previous disturbance in the 300 Area of the U.S. Department of Energy (DOE) Hanford Site to eliminate these areas from the cultural resource review process, reduce cultural resource monitoring costs, and allow cultural resource specialists to focus on areas where subsurface disturbance is minimal or nonexistent. Research into available sources suggests that impacts from excavations have been significant wherever the following construction activ… more
Date: January 7, 1999
Creator: Hale, L. L.; Wright, M. K. & Cadoret, N. A.
open access

300 Area Liquid Effluent Facilities (LEF) Authorization Envelope

Description: The purpose of this document is to establish the facility Authorization Envelope (AE) for the 300 Liquid Effluent Facilities (LEP )Project and identify the requirements related to the maintenance of the AE as Specified in HNF-PRO-2701, Authorization Envelope and Authorization Agreement. The 300 LEF Project consists of two separate facilities operating under one management organization. They are the 310 Facility and the 340 Facility. The AE documents the limits of operations for all 300 LEF Proj… more
Date: April 7, 2000
Creator: WRIGHT, E.J. & STORDEUR, R.T.
open access

340 Representative sampling verification tank sampling and analysis plan

Description: This Sampling and Analysis Plan contains requirements for characterizing the 340 vault tank 1. The objective of the sampling and characterization is to determine if the tank is homogeneous when agitated and which sampling method provides the most representative sample. A secondary objective is to collect and characterize solid samples.
Date: August 7, 1996
Creator: Olander, A.R., Westinghouse Hanford
open access

401(k) Plans and Retirement Savings: Issues for Congress

Description: From Summary: "This report describes seven major policy issues with respect to defined contribution plans include: 1. access to employer-sponsored retirement plans; 2. participation in employer-sponsored plans; 3. contribution rates; 4. investment choices; 5. fee disclosure; 6. leakage from retirement savings; converting retirement savings into income."
Date: January 7, 2011
Creator: Topoleski, John J.
open access

401(K) Plans: Labor and IRS Could Improve the Rollover Process for Participants

Description: A letter report issued by the Government Accountability Office with an abstract that begins "The current rollover process favors distributions to individual retirement accounts (IRA). Waiting periods to roll into a new employer plan, complex verification procedures to ensure savings are tax-qualified, wide divergences in plans' paperwork, and inefficient practices for processing rollovers make IRA rollovers an easier and faster choice, especially given that IRA providers often offer assistance … more
Date: March 7, 2013
Creator: United States. Government Accountability Office.
open access

450/sup 0/F step transient thermal analysis of the LOFT pressurizer surge and spray line piping

Description: The LOFT pressurizer spray and surge line piping was analyzed for a 450/sup 0/F step change in fluid temperature. This transient was chosen to conservatively represent several pressurizer operating transients that had not previously been analyzed. These include temperature transients resulting from a 300/sup 0/F ..delta..T between pressurizer temperature and cold leg temperature, injection of a cooled (70/sup 0/F) slug of stagnant fluid into the hot (540/sup 0/F) spray line piping, and inflow o… more
Date: July 7, 1977
Creator: Tolan, B.J.
Back to Top of Screen