Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements

Thumbnail image of item number 1 in: 'Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements'.
Thumbnail image of item number 2 in: 'Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements'.
Thumbnail image of item number 3 in: 'Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements'.
Thumbnail image of item number 4 in: 'Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements'.
Showing 1-4 of 151 pages in this document.

PDF Version Also Available for Download.

Description

Organic photovoltaic (OPV) technology is an attractive solar-electric conversion paradigm due to the promise of low cost roll-to-roll production and amenability to flexible substrates. Power conversion efficiency (PCE) exceeding 7% has recently been achieved. OPV cells suffer from low charge carrier mobilities of polymers, leading to recombination losses, higher series resistances and lower fill-factors. Thus, it is imperative to develop fabrication methodologies that can enable efficient optical absorption in films thinner than optical absorption length. Active layers conformally deposited on light-trapping, microscale textured, grating-type surfaces is one possible approach to achieve this objective. In this study, 40% theoretical increase in … continued below

Physical Description

5.25 MB

Creation Information

Nalwa, Kanwar November 3, 2012.

Context

This thesis or dissertation is part of the collection entitled: Office of Scientific & Technical Information Technical Reports and was provided by the UNT Libraries Government Documents Department to the UNT Digital Library, a digital repository hosted by the UNT Libraries. It has been viewed 171 times. More information about this document can be viewed below.

Who

People and organizations associated with either the creation of this thesis or dissertation or its content.

Author

Sponsor

Publisher

  • Ames Laboratory
    Publisher Info: Ames Laboratory (AMES), Ames, IA (United States)
    Place of Publication: Ames, Iowa

Provided By

UNT Libraries Government Documents Department

Serving as both a federal and a state depository library, the UNT Libraries Government Documents Department maintains millions of items in a variety of formats. The department is a member of the FDLP Content Partnerships Program and an Affiliated Archive of the National Archives.

About | Browse this Partner

Contact Us

Corrections Questions

What

Descriptive information to help identify this thesis or dissertation. Follow the links below to find similar items on the Digital Library.

Description

Organic photovoltaic (OPV) technology is an attractive solar-electric conversion paradigm due to the promise of low cost roll-to-roll production and amenability to flexible substrates. Power conversion efficiency (PCE) exceeding 7% has recently been achieved. OPV cells suffer from low charge carrier mobilities of polymers, leading to recombination losses, higher series resistances and lower fill-factors. Thus, it is imperative to develop fabrication methodologies that can enable efficient optical absorption in films thinner than optical absorption length. Active layers conformally deposited on light-trapping, microscale textured, grating-type surfaces is one possible approach to achieve this objective. In this study, 40% theoretical increase in photonic absorption over flat OPVs is shown for devices with textured geometry by the simulation results. For verifying this theoretical result and improving the efficiency of OPVs by light trapping, OPVs were fabricated on grating-type textured substrates possessing t pitch and -coat PV active-layer on these textured substrates led to over filling of the valleys and shunts at the crest, which severely affected the performance of the resultant PV devices. Thus, it is established that although the optical design is important for OPV performance but the potential of light trapping can only be effectively tapped if the textures are amenable for realizing a conformal active layer. It is discovered that if the height of the underlying topographical features is reduced to sub-micron regime (e.g. 300 nm) and the pitch is increased to more than a micron (e.g. 2 μm), the textured surface becomes amenable to coating a conformal PV active-layer. The resultant PV cells showed 100% increase in average light absorption near the band edge due to trapping of higher wavelength photons, and 20% improvement in power conversion efficiency as compared with the flat PV cell. Another factor that severely limits the performance of OPVs is recombination of charge carriers. Thus it becomes imperative to understand the effect of processing conditions such as spin coating speed and drying rate on defect density and hence induced carrier recombination mechanism. In this study, It is shown that slow growth (longer drying time) of the active-layer leads to reduction of sub-bandgap traps by an order of magnitude as compared to fast grown active-layer. By coupling the experimental results with simulations, it is demonstrated that at one sun condition, slow grown device has bimolecular recombination as the major loss mechanism while in the fast grown device with high trap density, the trap assisted recombination dominates. It has been estimated that non-radiative recombination accounts nearly 50% of efficiency loss in modern OPVs. Generally, an external bias (electric field) is required to collect all the photogenerated charges and thus prevent their recombination. The motivation is to induce additional electric field in otherwise low mobility conjugated polymer based active layer by incorporating ferroelectric dipoles. This is expected to facilitate singlet exciton dissociation in polymer matrix and impede charge transfer exciton (CTE) recombination at polymer:fullerene interface. For the first time, it is shown that the addition of ferroelectric dipoles to modern bulk heterojunction (BHJ) can significantly improve exciton dissociation, resulting in a ~50% enhancement of overall solar cell efficiency. The devices also exhibit the unique ferroelectric-photovoltaic effect with polarization-controlled power conversion efficiency.

Physical Description

5.25 MB

Subjects

STI Subject Categories

Language

Item Type

Identifier

Unique identifying numbers for this document in the Digital Library or other systems.

Collections

This document is part of the following collection of related materials.

Office of Scientific & Technical Information Technical Reports

Reports, articles and other documents harvested from the Office of Scientific and Technical Information.

Office of Scientific and Technical Information (OSTI) is the Department of Energy (DOE) office that collects, preserves, and disseminates DOE-sponsored research and development (R&D) results that are the outcomes of R&D projects or other funded activities at DOE labs and facilities nationwide and grantees at universities and other institutions.

About | Browse this Collection

What responsibilities do I have when using this thesis or dissertation?

Digital Files

When

Dates and time periods associated with this thesis or dissertation.

Creation Date

  • November 3, 2012

Added to The UNT Digital Library

  • May 19, 2016, 9:45 a.m.

Description Last Updated

  • Aug. 3, 2016, 4:02 p.m.

Usage Statistics

When was this document last used?

Yesterday: 0
Past 30 days: 0
Total Uses: 171
More Statistics

Interact With This Thesis Or Dissertation

Here are some suggestions for what to do next.

Start Reading

Thumbnail image of item number 1 in: 'Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements'.
Thumbnail image of item number 2 in: 'Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements'.
Thumbnail image of item number 3 in: 'Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements'.
Thumbnail image of item number 4 in: 'Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements'.

PDF Version Also Available for Download.

Citations, Rights, Re-Use

International Image Interoperability Framework

IIF Logo

We support the IIIF Presentation API

Links for Robots

Helpful links in machine-readable formats.

Archival Resource Key (ARK)

International Image Interoperability Framework (IIIF)

Metadata Formats

Images

URLs

Stats

Nalwa, Kanwar. Increasing the efficiency of organic solar cells by photonic and electrostatic-field enhancements, thesis or dissertation, November 3, 2012; Ames, Iowa. (https://digital.library.unt.edu/ark:/67531/metadc839205/: accessed May 26, 2024), University of North Texas Libraries, UNT Digital Library, https://digital.library.unt.edu; crediting UNT Libraries Government Documents Department.

Back to Top of Screen