Search Results

Advanced search parameters have been applied.
open access

Preliminary Field Evaluation of Mercury Control Using Combustion Modifications

Description: In this project EER conducted a preliminary field evaluation of the integrated approach for mercury (Hg) and NO{sub x} control. The approach enhanced the 'naturally occurring' Hg capture by fly ash through combustion optimization, increasing carbon in ash content, and lowering ESP temperature. The evaluation took place in Green Station Units 1 and 2 located near Henderson, Kentucky and operated by Western Kentucky Energy. Units 1 and 2 are equipped with cold-side ESPs and wet scrubbers. Green S… more
Date: January 22, 2005
Creator: Lissianski, V.; Maly, P. & Marquez, T.
Partner: UNT Libraries Government Documents Department
open access

In-Plant Testing of High-Efficiency Hydraulic Separators, Phase II Annual Technical Progress Report: 2005

Description: Hydraulic separators are commonly used for particle size classification and gravity concentration of minerals and coal. Unfortunately, the efficiency of these processes can be quite low due to poor equipment design and variations in feed consistency. To help alleviate these problems, an industry-driven R&D program has been undertaken to develop a new generation of hydraulic separators that are more efficient and less costly to operate and maintain. These units, which are commercially called… more
Date: May 22, 2006
Creator: Luttrell, G. H.; Honaker, R. Q.; Bratton, R. C.; Westerfield, T. C. & Kohmuench, J. N.
Partner: UNT Libraries Government Documents Department
open access

CALIBRATION OF THE HB LINE ACTIVE WELL NEUTRON COINCIDENCE COUNTER FOR MEASUREMENT OF LANL 3013 HIGHLY ENRICHED URANIUM PRODUCT SPLITS

Description: In this paper we describe set-up, calibration, and testing of the F-Area Analytical Labs active well neutron coincidence counter(HV-221000-NDA-X-1-DK-AWCC-1)in SRNL for use in HB-Line to enable assay of 3013EU/Pu metal product. The instrument was required within a three-month window for availability upon receipt of LANL Category IV uranium oxide samples into the SRS HB-Line facility. We describe calibration of the instrument in the SRNL nuclear nondestructive assay facility in the range 10-400 … more
Date: January 22, 2008
Creator: Dewberry, R; Donald02 Williams, D; Rstephen Lee, R; David-W Roberts, D & Leah Arrigo, L
Partner: UNT Libraries Government Documents Department
open access

ELECTROCHEMICAL CORROSION REPORT FOR TANKS 241-AW-103 & 241-AZ-102 & 241-AN-106 & 241-AN-107 & 241-AY-101 & 241-AY-102

Description: Corrosion rates using supernatant samples retrieved from near the top of the liquid layer were determined for the tanks. Corrosion rates using settled solids (saltcake) were determined. The supernatant samples were tested as received without argon sparging. The settled solid sample segments were extruded under anaerobic condition and kept under a sweep of humidified argon gas during 'the electrochemical corrosion testing. The class of steel used to construct the tank in question was used, and t… more
Date: August 22, 2007
Creator: JB, DUNCAN
Partner: UNT Libraries Government Documents Department
open access

RESULTS OF EXPERIMENT TO DETERMINE CORROSION RATES FOR 304L IN HB-LINE DISSOLVER VESSEL VENTILATION SYSTEM

Description: Radioactive material being processed as part of the DE3013 program for HB-Line will result in the presence of chlorides, and in some cases fluorides, in the dissolver. Material Science and Technology developed an experimental plan to evaluate the impact of chloride on corrosion of the dissolver vessel ventilation system. The plan set test variables from the proposed operating parameters, previous test results, and a desired maximum chloride concentration for processing. The test variables inclu… more
Date: February 22, 2008
Creator: Mickalonis, J & Kathryn Counts, K
Partner: UNT Libraries Government Documents Department
open access

Hot-Recycled-Solid pilot plant 1991 status report

Description: At Lawrence Livermore National Laboratory, we are studying above ground oil shale retorting and have developed the LLNL Hot-Recycled-Solid (HRS) process as a generic second-generation, rapid pyrolysis retorting system in which recycled shale is the solid heat carrier. In 1984--1987, we operated a 1 tonne-per-day HRS pilot plant to study retorting chemistry in an actual recirculation loop. In 1989 we upgraded our laboratory pilot plant to process 4 tonne-per-day of commercially sized shale, allo… more
Date: April 22, 1991
Creator: Cena, R.J.
Partner: UNT Libraries Government Documents Department
open access

A test of Newton's Law of Gravity using the BREN Tower, Nevada

Description: We predicted gravity values on a tower by upward continuing an extensive set of surface data in order to test the 1/r/sup 2/ dependence of Newton's Law of Universal Gravitation. We measured gravity at 12 heights up to 454 m on a tower at the Nevada Test Site, and at 91 locations on the surface of the earth within 2.5 kilometers of the tower. These data have been combined with 60,000 surface gravity measurements within 300 kilometers of the tower and have been used to predict the gravitational f… more
Date: May 22, 1989
Creator: Kasameyer, P.; Thomas, J.; Fackler, O.; Mugge, M.; Kammeraad, J.; Millett, M. et al.
Partner: UNT Libraries Government Documents Department
open access

Wind tunnel test of 1/30 scale heliostat field array model. Test report

Description: From 9 January through 20 January 1978, Honeywell conducted a wind tunnel test on a 1/30 scale partial heliostat field. The heliostats were per Honeywell's design developed under the 10 megawatt central receiver pilot electrical power plant subsystem research experiment contract. Likewise, the scaled section of the field geometry duplicated the proposed circular layout. Testing was conducted at the Georgia Institute of Technology's 9 foot subsonic tunnel. The objective of the test was… more
Date: February 22, 1978
Creator: Brown, G. L.
Partner: UNT Libraries Government Documents Department
open access

Time variations of fields in superconducting magnets and their effects on accelerators

Description: A report on the time dependence of magnetic fields in the superconducting magnets of the Fermilab Tevatron has been published. A field variation of order 1 gauss at the aperture radius is observed. Studies on both full sized Tevatron, dipoles and prototype magnets have been used to elucidate these effects. Explanations based on eddy currents in the coil matrix or on flux creep in the superconducting filaments are explored with these tests. Measurement results and techniques for controlling the … more
Date: August 22, 1988
Creator: Herrup, D. A.; Syphers, M. J.; Johnson, D. E.; Johnson, R. P.; Tollestrup, A. V.; Hanft, R. W. et al.
Partner: UNT Libraries Government Documents Department
open access

Program plan for the Brayton isotope power system. Phase I. design, fabrication and test of the Brayon isotope power system

Description: This program plan covers Phase I of an overall program for the development of a 500 to 2000 W/sub e/ (EOM), 7-year life, power system for space vehicles. The system uses a closed Brayton dynamic system to convert energy from an isotope heat source at a net efficiency greater than 25 percent. This first phase, a 35-months effort, is for the conceptual design of a 1300 W/sub e/, 450 lb flight system and the design, fabrication, and test of a ground demonstration system. The flight system will use… more
Date: October 22, 1975
Partner: UNT Libraries Government Documents Department
open access

MFTF-B Upgrade for blanket-technology testing

Description: Based on preliminary studies at Lawrence Livermore National Laboratory (LLNL), we believe the Mirror Fusion Test Facility (MFTF-B) could be upgraded for operation in a hot-ion Kelley mode in a portion of the central cell to provide fusion nuclear engineering data, particularly blanket technology information, by the end of the decade. Cost of this mode of operation would be modest compared with that of the other fusion devices considered in the last few years for such purposes.
Date: October 22, 1982
Creator: Thomassen, K. I.; Doggett, J. N. & Logan, B. G.
Partner: UNT Libraries Government Documents Department
open access

Measurement of local void fraction in a ribbed annulus

Description: The computer code FLOWTRAN-TF is used to analyze hypothetical hydraulic accidents for the nuclear reactor at the Savannah River Site. During a hypothetical Large Break Loss-of-Coolant Accident (LOCA), reactor assemblies would contain a two-phase mixture of air and water which flows downward. Reactor assemblies consist of nested, ribbed annuli. Longitudinal ribs divide each annulus into four subchannels. For accident conditions, air and water can flow past ribs from one subchannel to another. Fo… more
Date: December 22, 1992
Creator: Steimke, J. L.
Partner: UNT Libraries Government Documents Department
open access

High- and low-temperature bonding techniques for microstructures

Description: The ability to bond together two or more silicon wafers greatly expands the variety and complexity of silicon microstructures that can be designed and fabricated. At LLNL, microstructures have been used for many years as hardware in scientific experiments. The activity has recently been expanded into other areas to include microinstruments for biomedical applications and for chemical analysis. Both high temperature (1100{degrees}C) bonding techniques have been used, depending on the application… more
Date: June 22, 1993
Creator: Ciarlo, D. R.
Partner: UNT Libraries Government Documents Department
open access

Studies of time dependence of fields in TEVATRON superconducting dipole magnets

Description: The time variation in the magnetic field of a model Tevatron dipole magnet at constant excitation current has been studied. Variations in symmetry allowed harmonic components over long time ranges show a log t behavior indicative of ''flux creep.'' Both short time range and long time range behavior depend in a detailed way on the excitation history. Similar effects are seen in the remnant fields present in full-scale Tevatron dipoles following current ramping. Both magnitudes and time dependenc… more
Date: August 22, 1988
Creator: Hanft, R. W.; Brown, B. C.; Herrup, D. A.; Lamm, M. J.; McInturff, A. D. & Syphers, M. J.
Partner: UNT Libraries Government Documents Department
open access

Environmental report 1998, executive summary

Description: Lawrence Livermore National Laboratory (LLNL), a U.S. Department of Energy (DOE) facility operated by the University of California, serves as a national resource of scientific, technical, and engineering capabilities. The Laboratory's mission focuses on nuclear weapons and national security, and over the years has been broadened to include areas such as strategic defense, energy, the environment, biomedicine, technology transfer, the economy, and education. The Laboratory carries out this missi… more
Date: September 22, 1999
Creator: Larson, J. M.; Harrach, R. J.; Althouse, P. E.; Bertoldo, N. A.; Biermann, A. H.; Blake, R. G. et al.
Partner: UNT Libraries Government Documents Department
open access

Certification Testing and Demonstration of Insulated Pressure Vessels for Vehicular Hydrogen Storage

Description: Insulated pressure vessels are cryogenic-capable pressure vessels that can be fueled with liquid hydrogen or ambient-temperature compressed hydrogen. This flexibility results in multiple advantages with respect to compressed hydrogen tanks or low-pressure liquid hydrogen tanks. Our work is directed at verifying that commercially available aluminum-lined, fiber-wrapped pressure vessels can be safely used to store liquid hydrogen. A series of tests have been conducted, and the results indicate th… more
Date: May 22, 2002
Creator: Aceves, S. M.; Martinez-Frias, J. & Espinosa-Loza, F.
Partner: UNT Libraries Government Documents Department
open access

Mark I 1/5-scale boiling water reactor pressure suppression experiment. Quick-look report for test numbers 1. 1, 1. 2, and 1. 3 performed on March 18, 25, and 30, 1977

Description: The tests conducted on the /sup 1///sub 5/-scale BWR Mark I pressure suppression test facility simulate the three-dimensional transient conditions that are encountered in a wetwell pressure suppression system during a hypothetical loss-of-coolant accident (LOCA). Specifically, the nitrogen (N/sub 2/)-driven air clearing phase tests discussed were performed to obtain the air/water-induced dynamic vertical load function and to determine the response of a 90/sup 0/ sector of a 360/sup 0/ torus str… more
Date: April 22, 1977
Creator: McCauley, E. W. & Pitts, J. H.
Partner: UNT Libraries Government Documents Department
open access

General MoM Solutions for Large Arrays

Description: This paper focuses on a numerical procedure that addresses the difficulties of dealing with large, finite arrays while preserving the generality and robustness of full-wave methods. We present a fast method based on approximating interactions between sufficiently separated array elements via a relatively coarse interpolation of the Green's function on a uniform grid commensurate with the array's periodicity. The interaction between the basis and testing functions is reduced to a three-stage pro… more
Date: July 22, 2003
Creator: Fasenfest, B; Capolino, F; Wilton, D R; Jackson, D R & Champagne, N
Partner: UNT Libraries Government Documents Department
open access

TESTING OF ENHANCED CHEMICAL CLEANING OF SRS ACTUAL WASTE TANK 5F AND TANK 12H SLUDGES

Description: Forty three of the High Level Waste (HLW) tanks at the Savannah River Site (SRS) have internal structures that hinder removal of the last approximately five thousand gallons of waste sludge solely by mechanical means. Chemical cleaning can be utilized to dissolve the sludge heel with oxalic acid (OA) and pump the material to a separate waste tank in preparation for final disposition. This dissolved sludge material is pH adjusted downstream of the dissolution process, precipitating the sludge co… more
Date: August 22, 2011
Creator: Martino, C. & King, W.
Partner: UNT Libraries Government Documents Department
open access

Separation of B/sub 4/C powder by air classification

Description: Large quantities of bulk powder can be separated according to particle size and density by air classifiers. Classifiers disperse the powder and usually achieve size differentiation by drag and centrifugal forces acting on individual particles in the gas stream. A Donaldson ''acucut'' Classifier for the separation of B/sub 4/C powder is evaluated. Experimental tests were conducted to determine the particle cut sizes and powder yields obtained by variation of operating parameters. To assess the c… more
Date: December 22, 1976
Creator: Farrell, C. L. & Biermann, A. H.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen