1,422 Matching Results

Search Results

Results: 1 - 24 next
open access

Use of molybdenum ion source electrodes at RTNS-II

Description: Reports are reported for an ongoing effort to optimize D+ beam production by the MATS-III ion source used at RTNS-II. The three seven-aperture electrodes, originally consisting of water-cooled copper, have now been tested using uncooled molybdenum and with water cooling on the second (decel) electrode only. Details of the change, the results of the testing, and the benefits in operation, performance and cost are given.
Date: September 29, 1986
Creator: Massoletti, D.J.; Harter, G.A. & Heikkinen, D.W.
Partner: UNT Libraries Government Documents Department
open access

Structure functions: Their status and implications

Description: I discuss the current status of structure functions. Attention is given to the uncertainties in them and the implications of these uncertainties for experimental predictions. I indicate which experiments are capable of removing these uncertainties. 17 refs., 17 figs., 1 tab.
Date: September 29, 1988
Creator: Hinchliffe, I.
Partner: UNT Libraries Government Documents Department
open access

Top quark and light Higgs scalar mass bounds in no-scale supergravity

Description: No-scale supergravity theories with the minimal low-energy particle content are shown to become untenable for a top quark mass m/sub T/ much less than 40 GeV. For m/sub T/ < 55 GeV, a stringent upper bound operates on the mass of the lowest-lying Higgs scalar. Further, the Higgs pseudoscalar is constrained to be nearly a quarter as massive as the gluino.
Date: August 29, 1986
Creator: Roy, P.
Partner: UNT Libraries Government Documents Department
open access

Oxide cathode lifetime improvements at RTNS-II

Description: Results are reported for an ongoing effort to optimize D/sup +/ beam production by the MATS-III ion source used at the RTNS-II. The oxide cathode assembly originally designed for lower power operation has been modified and redesigned for higher electron current yield, longer life and serviceability. A factor of 2.5 has been gained in cathode lifetime due to these changes. The details of the changes and results and benefits in operation and performance are given. In addition, the technique used … more
Date: September 29, 1986
Creator: Massoletti, D.J.
Partner: UNT Libraries Government Documents Department
open access

Overview of radioactive waste management

Description: The question of what to do with radioactive wastes is discussed. The need to resolve this issue promptly is pointed out. Two significant events which have occurred during the Carter administration are discussed. An Interagency Review Group (IRG) on waste management was formed to formulate recommendations leading to the establishment of a National policy for managing radioactive wastes. The technical findings in the IRG report are listed. The author points out some issues not addressed by the re… more
Date: May 29, 1980
Creator: Ritter, G.L.
Partner: UNT Libraries Government Documents Department
open access

Applications of small computers for systems control on the Tandem Mirror Experiment-Upgrade

Description: Desktop computers operating into a CAMAC-based interface are used to control and monitor the operation of the various subsystems on the Tandem Mirror Experiment-Upgrade (TMX-U) at Lawrence Livermore National Laboratory (LLNL). These systems include: shot sequencer/master timing, neutral beam control (four consoles), magnet power system control, ion-cyclotron resonant heating (ICRH) control, thermocouple monitoring, getter system control, gas fueling system control, and electron-cyclotron resona… more
Date: November 29, 1983
Creator: Bork, R. G.; Kane, R. J. & Moore, T. L.
Partner: UNT Libraries Government Documents Department
open access

Control of beam dynamics in high energy induction linacs

Description: The Advent of laser-ion-guiding in the Advanced test Accelerator along with the development of accelerator cavities optimized with respect to beam breakup coupling impedence now make it possible to consider a new class of high current, high emergy linear induction accelerators. The control of the beam breakup and other instabilities by laser guiding and by various magnetic focusing schemes will be discussed along with the scaling laws for the design of such machines to minimize the growth of th… more
Date: July 29, 1986
Creator: Caporaso, G.J.
Partner: UNT Libraries Government Documents Department
open access

Does the photino decay

Description: The stability of the lightest superpartner is a crucial aspect of many experimental searches for supersymmetry and of supersymmetric dark matter candidates. It is shown that R parity may occur in operators of dimension four or less as an accidental consequence of an exact Z/sub N/ symmetry. In this case the lightest superpartner can decay via higher dimension operators. The lifetime depends on the scale of the new physics responsible for the non-renormalizable operators; it could be anywhere in… more
Date: August 29, 1986
Creator: Hall, L.J.
Partner: UNT Libraries Government Documents Department
open access

High energy negative deuterium beams using double charge-exchange or surface production

Description: Experimental and theoretical research on production of negative ion beams is described. Results from a double charge-exchange experiment include 10 ms pulses of 100 ma of D/sup -/ accelerated to 60 kV. Equilibrium fractions of D/sup -/ in several metal vapors are presented. Mechanisms and measurements of D/sup -/ on surfaces are described, and a scheme is shown for producing high current, high energy beams originating on surfaces.
Date: November 29, 1977
Creator: Hooper, E. B. Jr.; Anderson, O. A.; Orzechowski, T. & Poulsen, P.
Partner: UNT Libraries Government Documents Department
open access

Coil winder for the magnet of the mirror fusion test facility

Description: A coil winder was designed for the purpose of fabricating the superconducting magnets of the Mirror Fusion Test Facility. The superconducting magnets are a displaced ying-yang pair, each having major and minor radii of 2.5 and 0.75 m, respectively, and cross section of 0.42 m by about 1.03 m. The superconductor cross section is a square, 13 mm on a side, and consists of a core of niobium-titanium embedded copper and a solid copper stabilizer. Conceptual studies made at Lawrence Livermore Labora… more
Date: August 29, 1977
Creator: Ling, R.C.
Partner: UNT Libraries Government Documents Department
open access

Localized corrosion of steels in geothermal steam/brine mixtures

Description: Coupons of eight different carbon and chrome-moly alloy steels were exposed to high temperature, high salinity wellhead brine flow at a geothermal well in the Salton Sea Geothermal Field for periods of up to six months. The corrosion rate and corrosion attack morphology of each coupon was determined. Exposure time was a test variable and ranged from one month to six months. Test results indicate that carbon steels generally suffer high corrosion rates and are susceptible to severe localized att… more
Date: May 29, 1980
Creator: McCright, R. D.; Frey, W. F. & Tardiff, G. E.
Partner: UNT Libraries Government Documents Department
open access

Samanid ceramics and neutron activation analysis

Description: Glazed pottery known as ''Afrasiyab'' and ''Nishapur'' wares (early Islamic ceramics) are generally attributed to the Samanid dynasty (819-1005). The clay composition of Samanid wares and discarded kiln items found in situ were analyzed by NAA and the elemental composition compared with that of other sherds. 7 figures, 1 table. (DLC)
Date: August 29, 1977
Creator: Azarpay, G.; Frierman, J.D. & Asaro, F.
Partner: UNT Libraries Government Documents Department
open access

Compact 80-keV neutral-beam module

Description: A compact and maintainable source of 80-keV neutral beams that focus to a high power density is required for the Mirror Fusion Test Facility (MFTF). In the new source being designed and built to meet these requirements, the cross-sectional area is reduced in two ways: by immersing the source in a vacuum where high voltage can be held over smaller distances and by redesigning grid supporting structures. Reliability is increased by reducing the electric fields everywhere else below those present … more
Date: September 29, 1977
Creator: Molvik, A. W.; Baird, E. D.; Berkner, K. H.; Cooper, W. S.; Duffy, T. J.; Ehlers, K. W. et al.
Partner: UNT Libraries Government Documents Department
open access

TMX tandem-mirror experiments and thermal-barrier theoretical studies

Description: This paper describes recent analysis of energy confinement in the Tandem Mirror Experiment (TMX). TMX data also indicates that warm plasma limits the amplitude of the anisotropy driven Alfven ion cyclotron (AIC) mode. Theoretical calculations show strong AIC stabilization with off-normal beam injection as planned in TMX-U and MFTF-B. This paper reports results of theoretical analysis of hot electrons in thermal barriers including electron heating calculations by Monte Carlo and Fokker-Planck co… more
Date: July 29, 1982
Creator: Simonen, T. C.; Baldwin, D. E. & Allen, S. L.
Partner: UNT Libraries Government Documents Department
open access

Application of heavy-light methods to B meson physics

Description: The heavy-light method is applied to the study of the B meson spectrum, the pseudoscalar decay constant f{sub B}, the mixing (B) parameter, and exclusive semileptonic B meson decays. Preliminary results are discussed for f{sub B} and the B parameter at {beta} = 5.7 and {kappa} = 0.165 on a 12{sup 3} {times} 24 lattice and at {beta} = 5.9 and {kappa} = 0.158 on a 16{sup 3} {times} 32 lattice. 9 refs., 2 figs., 2 tabs.
Date: December 29, 1989
Creator: Eichten, E.; Hockney, G. & Thacker, H.B.
Partner: UNT Libraries Government Documents Department
open access

TMX tandem-mirror experiments and thermal-barrier theoretical studies

Description: This paper describes recent analysis of energy confinement in the Tandem Mirror Experiment (TMX). TMX data also indicates that warm plasma limits the amplitude of the anisotropy driven Alfven ion cyclotron (AIC) mode. Theoretical calculations show strong AIC stabilization with off-normal beam injection as planned in TMX-U and MFTF-B. This paper reports results of theoretical analysis of hot electrons in thermal barriers including electron heating calculations by Monte Carlo and Fokker-Planck co… more
Date: July 29, 1982
Creator: Simonen, T. C.; Baldwin, D. E. & Allen, S. L.
Partner: UNT Libraries Government Documents Department
open access

Structural and electronic properties of carbon nanotube tapers

Description: Article on structural and electronic properties of carbon nanotube tapers, a set of nanostructures comprised of straight tubular sections with decreasing diameters, joined to each other via conical funnels and terminated with a hemispherical cap.
Date: October 29, 2001
Creator: Meunier, Vincent; Buongiorno Nardelli, Marco; Roland, Christopher & Bernholc, Jerry
Partner: UNT College of Arts and Sciences
open access

4. pi. interferometric measurements of laser fusion targets

Description: Apparatus is described for rapidly manipulating a hollow glass microsphere laser fusion target and scanning the entire wall with a double pass interference microscope.
Date: September 29, 1977
Creator: Weinstein, B.W.; Willenborg, D.L.; Weir, J.T. & Hendricks, C.D.
Partner: UNT Libraries Government Documents Department
open access

Reservoir response to tidal and barometric effects

Description: Solid earth tidal strain and surface loading due to fluctuations in barometric pressure have the effect, although extremely minute, of dilating or contracting the effective pore volume in a porous reservoir. If a well intersects the formation, the change in pore pressure can be measured with sensitive quartz pressure gauges. Mathematical models of the relevant fluid dynamics of the well-reservoir system have been generated and tested against conventional well pumping results or core data at the… more
Date: May 29, 1980
Creator: Hanson, J.M.
Partner: UNT Libraries Government Documents Department
open access

Regulated 15-V, 7500-A, neutral-beam filament supply

Description: Lawrence Livermore Laboratory (LLL) designed a cost-effective, regulated 15-V, 7500-A filament supply for use with the High-Voltage Test Stand , a major ERDA developmental neutral-beam test facility. The filament supply can float to 200 kV and can provide pulse widths up to 30 s. Powered by a 24-V, 0.5-TJ battery bank, it avoids the use of expensive isolation transformers and induction voltage regulators (IVR's). Battery output is regulated by a water-cooled resistor-contactor combination in wh… more
Date: September 29, 1977
Creator: Reass, W.
Partner: UNT Libraries Government Documents Department
open access

Tradeoffs in capacitor bank design

Description: When designing a capacitor bank for energy storage, the engineer should not use more capacitors, voltage, or energy than necessary to supply the load and to overcome losses. Universal curves presented here aid the designer in making intelligent choices. For example, there is a minimum stored energy to be achieved, but no minimum voltage at which to store it. Included in the curves are the effects of series losses such as voltage drops in regulator tubes or in current-limiting resistors. Capacit… more
Date: September 29, 1977
Creator: Leavitt, G.A.
Partner: UNT Libraries Government Documents Department
open access

Ion microstability in tandem mirrors

Description: The formalism describing ion-cyclotron modes in mirror traps will be developed. Emphasis will be placed on the effects of finite axial boundaries on the normal modes of the system. Wave properties are a composite picture of: positive energy waves (plasma oscillation, shear Alfven and drift waves), negative energy waves (ion Bernstein waves in a loss-cone media), positive dissipation (electron Landau damping, outgoing waves), and negative dissipation (ion cyclotron damping in a loss-cone and ani… more
Date: August 29, 1983
Creator: Pearlstein, L.D.
Partner: UNT Libraries Government Documents Department
open access

Mirror research: status and prospects

Description: The tandem mirror program has evolved considerably in the last decade. Of significance is the viable reactor concept embodied in the MARS design. An aggressive experimental program culminating in the operation of MFTF-B in late 1986, will provide a firm basis for refining the MARS design as necessary for constructing a reactor prototype in the 1990s.
Date: November 29, 1983
Creator: Baldwin, D.E.
Partner: UNT Libraries Government Documents Department
open access

LMFBR fuel component costs

Description: A significant portion of the cost of fabricating LMFBR fuels is in the non-fuel components such as fuel pin cladding, fuel assembly ducts and end fittings. The contribution of these to fuel fabrication costs, based on FFTF experience and extrapolated to large LMFBR fuel loadings, is discussed. The extrapolation considers the expected effects of LMFBR development programs in progress on non-fuel component costs.
Date: October 29, 1981
Creator: Epperson, E.M.; Borisch, R.R. & Rice, L.H.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen