Office of Scientific & Technical Information Technical Reports - 6,532 Matching Results

Search Results

Results: 1 - 24 next
open access

1,3-Propanediol Made From Fermentation-Derived Malonic Acid: Office of Industrial Technologies (OIT) Agriculture Project Fact Sheet

Description: 1,3-Propanediol is one of two ingredients used in producing polytrimethylene terephthalate (PTT), a polymer which can be used in polyester and nylon applications. Researchers are developing a process to ferment biomass feedstock to malonic acid using filamentous fungi and then catalytically convert malonic acid to 1,3-propanediol.
Date: September 12, 2001
Creator: Carde, T.
Item Type: Refine your search to only Book
Partner: UNT Libraries Government Documents Department
open access

2-D Reflectometer Modeling for Optimizing the ITER Low-field Side Reflectometer System

Description: The response of a low-field side reflectometer system for ITER is simulated with a 2?D reflectometer code using a realistic plasma equilibrium. It is found that the reflected beam will often miss its launch point by as much as 40 cm and that a vertical array of receiving antennas is essential in order to observe a reflection on the low-field side of ITER.
Date: September 2, 2005
Creator: Kramer, G. J.; Nazikian, R.; Valeo, E. J.; Budny, R. V.; Kessel, C. & Johnson, D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3.1.1.2 Feed Processing and Handling DL2 Final Report

Description: This milestone report is the deliverable for our Feed Processing and Handling project. It includes results of wet biomass feedstock analysis, slurry pumping information, fungal processing to produce a lignin-rich biorefinery residue and two subcontracted efforts to quantify the amount of wet biomass feedstocks currently available within the corn processing and paper processing industries.
Date: September 30, 2006
Creator: Elliott, Douglas C.; Magnuson, Jon K. & Wend, Christopher F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A 3.3 MJ, Rb{sup +1} Driver Design Based on an Integrated Systems Analysis

Description: A computer model for systems analysis of heavy ion drivers has been developed and used to evaluate driver designs for inertial fusion energy (IFE). The present work examines a driver for a close-coupled target design that requires less total beam energy but also smaller beam spots sizes than previous target designs. Design parameters and a cost estimate for a 160 beam, 3.3 MJ driver using rubidium ions (A = 85) are reported, and the sensitivity of the results to variations in selected design pa… more
Date: September 15, 2000
Creator: Meier, W. R.; Barnard, J. J. & Bangerter, R. O.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

3-D Combinatorial Geometry in the MERCURY Monte Carlo Particle Transport Code

Description: Lawrence Livermore National Laboratory is in the process of developing a new Monte Carlo Particle Transport code named MERCURY. This new code features a 3-D Combinatorial Geometry tracking algorithm. This paper details some of the characteristics of this Monte Carlo tracker
Date: September 27, 2004
Creator: Greenman, G
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

3-D Experimental Fracture Analysis at High Temperature

Description: T*e, which is an elastic-plastic fracture parameter based on incremental theory of plasticity, was determined numerically and experimentally. The T*e integral of a tunneling crack in 2024-T3 aluminum, three point bend specimen was obtained through a hybrid analysis of moire interferometry and 3-D elastic-plastic finite element analysis. The results were verified by the good agreement between the experimentally and numerically determined T*e on the specimen surface.
Date: September 14, 2001
Creator: Jackson, John H. & Kobayashi, Albert S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, and River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: The goal of this project is to improve the recovery of oil from the Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models.
Date: September 9, 2002
Creator: La Pointe, Paul R. & Hermanson, Jan
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, and River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: The goal of this project is to improve the recovery of oil from the Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models.
Date: September 9, 2002
Creator: Pointe, La; Paul; Parney, Robert; Eiben, Thorsten; Dunleavy, Mike & Whitney, John
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, and River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: The goal of this project is to improve the recovery of oil from the Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models.
Date: September 9, 2002
Creator: La Pointe, Paul; Parney, Robert; Eiben, Thorsten; Dunleavy, Mike; Whitney, John & Eubanks, Darrel
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, and River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: The goal of this project is to improve the recovery of oil from the Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models.
Date: September 9, 2002
Creator: La Pointe, Paul R.; Hermanson, Jan & Eiben, Thorsten
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Seismic Exploration Project, Ute Indian Tribe, Uintah and Ouray Reservation, Uintah County, Utah

Description: The objectives of this North Hill Creek 3-D seismic survey were to: (1) cover as large an area as possible with available budget; (2) obtain high quality data throughout the depth range of the prospective geologic formations of 2,000' to 12,000' to image both gross structures and more subtle structural and stratigraphic elements; (3) overcome the challenges posed by a hard, reflective sandstone that cropped out or was buried just a few feet below the surface under most of the survey area; and (… more
Date: September 9, 2002
Creator: Eckels, Marc T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Simulations of Plasma Wakefield Acceleration with Non-Idealized Plasmas and Beams

Description: 3-D Particle-in-cell OSIRIS simulations of the current E-162 Plasma Wakefield Accelerator Experiment are presented in which a number of non-ideal conditions are modeled simultaneously. These include tilts on the beam in both planes, asymmetric beam emittance, beam energy spread and plasma inhomogeneities both longitudinally and transverse to the beam axis. The relative importance of the non-ideal conditions is discussed and a worst case estimate of the effect of these on energy gain is obtained… more
Date: September 27, 2005
Creator: Deng, S.; Katsouleas, T.; Lee, S.; Muggli, P.; Mori, W. B.; Hemker, R. et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

3-D surface profile measurements of large x-ray synchrotron radiation mirrors using stitching interferometry.

Description: Stitching interferometry, using small-aperture, high-resolution, phase-measuring interferometry, has been proposed for quite some time now as a metrology technique to obtain 3-dimensional profiles of surfaces of oversized optical components and substrates. The aim of this work is to apply this method to the specific case of long grazing-incidence x-ray mirrors, such as those used in beamlines at synchrotron radiation facilities around the world. Both fabrication and characterization of these mi… more
Date: September 12, 2002
Creator: Assoufid, L.; Bray, M.; Qian, J. & Shu, D.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

A 3-year plan for beam science in the heavy-ion fusion virtual national laboratory

Description: In December 1998, LBNL Director Charles Shank and LLNL Director Bruce Tarter signed a Memorandum of Agreement to create the Heavy-Ion Fusion Virtual National Laboratory (HIF-VNL) with the purpose of improving the efficiency and productivity of heavy ion research through coordination of the two laboratories' efforts under one technical director. In 1999, PPPL Director Robert Goldston signed the VNL MOA for PPPL's heavy-ion fusion group to join the VNL. LBNL and LLNL each contribute about 45% of … more
Date: September 10, 2001
Creator: Logan, B. Grant
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

4-D High-Resolution Seismic Reflection Monitoring of Miscible CO2 Injected into a Carbonate Reservoir

Description: The objective of this research project is to acquire, process, and interpret multiple high-resolution 3-D compressional wave and 2-D, 2-C shear wave seismic data to observe changes in fluid characteristics in an oil field before, during, and after the miscible carbon dioxide (CO{sub 2}) flood that began around December 1, 2003, as part of the DOE-sponsored Class Revisit Project (DOE DE-AC26-00BC15124). Unique and key to this imaging activity is the high-resolution nature of the seismic data, mi… more
Date: September 1, 2005
Creator: Miller, Richard D.; Raef, Abdelmoneam E.; Byrnes, Alan P. & Harrison, William E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A 10 Hz Grazing Incidence pumped Ni-like Mo laser at 18.9 nm with 150 mJ pump energy

Description: The first demonstration of the grazing incidence pumping (GRIP) scheme for laser-driven x-ray lasers (XRLs) is described utilizing 2-pulse pumping. A long pulse is incident normal to the target to produce a plasma with a particular density profile. Then a short pulse is incident at a grazing angle, chosen to optimally couple the short pulse laser energy into the specific density region where the inversion process will occur. The short pulse is simultaneously absorbed and refracted at a maximum … more
Date: September 30, 2004
Creator: Keenan, R.; Dunn, J.; Patel, P. K.; Price, D. F.; Smith, R. F. & Shlyaptsev, V. N.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

A 90-GHz Photoinjector

Description: Photocathode rf guns depend on mode locked laser systems to produce an electron beam at a given phase of the rf. In general, the laser pulse is less than {sigma}{sub z} = 10{sup o} of rf phase in length and the required stability is on the order of {Delta}{phi} = 1{sup o}. At 90 GHz (W-band), these requirements correspond to {sigma}{sub z} = 333 fsec and {Delta}{phi} = 33 fsec. Laser system with pulse lengths in the fsec regime are commercially available, the timing stability is a major concern… more
Date: September 12, 2005
Creator: Palmer, D. T.; Hogan, M. J.; Ferrario, M. & Serafini, L.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

94-1 R&D Program Annual Operating Plan

Description: The 94-1 R&D Program focuses on developing the technical basis for stabilizing and safely storing plutonium-bearing materials. To address these issues, we have in place a material identification and stabilization project, a surveillance and monitoring project, and a management team.
Date: September 1, 2003
Creator: Mason, Richard E. & Dominguez, Pamela D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

94-1 R&D program annual operating plan: Fiscal Year 2003

Description: The 94-1 R&D Program focuses on developing the technical basis for stabilizing and safely storing plutonium-bearing materials. To address these issues, we have in place a material identification and stabilization project, a surveillance and monitoring project, and a management team.
Date: September 1, 2003
Creator: Mason, Richard E. & Dominguez, Pamela D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The 100,000 amp dc power supply for a staged hadron collider super ferric magnet

Description: A 1.5 volt 100,000 amp DC switcher power supply was developed for testing a superferric magnet string at FNAL. This supply was used during testing as both the ramping supply and holding supply powering a single magnet load with a total load resistance of 0.7{micro} Ohms. The supply consists of ten paralleled switcher cells, powered by a 400 volt/600 Amp DC power supply. Each cell consists of an IGBT H-bridge driving a step-down transformer at a switching frequency of 2 kHz. The transformer has … more
Date: September 1, 2005
Creator: Hays, Steven L.; Claypool, Bradley & Foster, G. William
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

The 100 kA current leads for a superconducting transmission line magnet

Description: A pair of current leads to power a transmission line magnet cooled at liquid helium temperature has been designed and developed at Fermilab. The leads designed to carry 100 kA dc current. Each lead consists of a warm end, heat exchange section and a cold end. The warm end is a half moon plate and cylinder brazed together. The heat exchange section is made of 202 copper rods arranged in a staggered pattern. Each rod is 6.35 mm in diameter and 1650 mm in length. The rods were soft-soldered into 1… more
Date: September 1, 2005
Creator: Huang, Yuenian; Foster, William; Kim, Seog-Whan; Mazur, Peter; Oleck, Andrew; Piekarz, Henryk et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

200-BP-1 Prototype Hanford Barrier - 15 Years of Performance Monitoring

Description: Engineered surface barriers are recognized as a remedial alternative to the removal, treatment and disposal of near-surface contaminants at a variety of waste sites within the DOE complex. One issue impacting their acceptance by stakeholders the use of limited data to predict long-term performance. In 1994, a 2-ha multi-component barrier was constructed over an existing waste disposal site at Hanford using natural materials. Monitoring has been almost continuous for the last 15 yrs and has focu… more
Date: September 1, 2009
Creator: Ward, Anderson L.; Link, Steven O.; Draper, Kathryn E. & Clayton, Ray E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

300 Area D4 Project 3rd Quarter Fiscal Year 2006 Building Completion Report

Description: This report documents the deactivation, decontamination, decommissioning, and demolition of five buildings in the 300 Area of the Hanford Site. The D4 of these facilities included characterization, engineering, removal of hazardous and radiologically contaminated materials, equipment removal, utility disconnection, deactivation, decontamination, demolition of the structure, and stabilization or removal of the remaining slab and foundation as appropriate.
Date: September 25, 2006
Creator: Smith, D. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen