Office of Scientific & Technical Information Technical Reports - 2,850 Matching Results

Search Results

Results: 1 - 24 next
open access

1,2-HOIQO--A highly versatile 1,2-HOPO analog

Description: A cyclic, bidentate hydroxamic acid binding unit based on an isoquinoline scaffold has been utilized for the synthesis of a hexadentate tripodal ligand based on the TREN backbone. This prototype for a new class of multidentate chelators forms mononuclear iron(III) complexes and one-dimensional coordination polymers with lanthanide(III) cations. The latter has been determined by single crystal X-ray analysis of the cerium species. The solid state structure in the monoclinic space group P2{sub 1}… more
Date: August 7, 2006
Creator: Seitz, Michael; Pluth, Michael D. & Raymond, Kenneth N.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

1+ -n+ ECR Ion Source Development Test Stand

Description: A test stand for the investigation of 1+-n+ charge boosting using an ECR ion sources is currently being assembled at the Texas A&M Cyclotron Institute. The ultimate goal is to relate the charge-boosting of ions of stable species to possible charge-boosting of ions of radioactive species extracted from the diverse, low-charge-state ion sources developed for radioactive ion beams.
Date: April 7, 2006
Creator: May, Donald P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

2 MV Injector as the Elise Front-End and as an Experimental Facility

Description: We report on progress in the preparation of the 2 MV Injector at LBNL as the front-end of Elise, and as a multi-purpose experimental facility for Heavy Ion Fusion beam dynamics studies. Recent advances on the performance and understanding of the injector are described, and some of the on-going experimental activities are summarized.
Date: December 7, 1999
Creator: Yu, S. S.; Eylon, S.; Henestroza, E.; Peters, C.; Reginato, L.; Tauschwitz, A. et al.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A 3.3 MJ, Rb + 1 driver design based on an integrated systems analysis

Description: A computer model for systems analysis of heavy ion drivers has been developed and used to evaluate driver designs for inertial fusion energy (IFE). The present work examines a driver for a close-coupled target design that requires less total beam energy but also smaller beam spots sizes than previous target designs. Design parameters and a cost estimate for a 160 beam, 3.3 MJ driver using rubidium ions (A = 85) are reported, and the sensitivity of the results to variations in selected design pa… more
Date: March 7, 2000
Creator: Meier, W. R.; Barnard, J. J. & Bangerter, R. O.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

A 6.3 T Bend Magnet for the Advanced Light Source

Description: The Advanced Light Source (ALS) is a 1.5 to 1.9 GeV high-brightness electron storage ring operating at Lawrence Berkeley Laboratory (LBL) that provides synchrotron radiation for a large variety of users. It Is proposed to replace three of the thirty six 1.5T, one meter long bend magnets with very sbort high-field superconductlng (SC) dipoles. These magnets would provide bend-magnet synchrotron radiation to six bcamlines with a critical energy of at least 6 keV that is much better suited for pro… more
Date: June 7, 1995
Creator: Taylor, C. E. & Caspi, S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

08-ERD-071 Final Report: New Molecular Probes and Catalysts for Bioenergy Research

Description: A major thrust in bioenergy research is to develop innovative methods for deconstructing plant cell wall polymers, such as cellulose and lignin, into simple monomers that can be biologically converted to ethanol and other fuels. Current techniques for monitoring a broad array of cell wall materials and specific degradation products are expensive and time consuming. To monitor various polymers and assay their breakdown products, molecular probes for detecting specific carbohydrates and lignins a… more
Date: March 7, 2011
Creator: Thelen, M. P.; Rowe, A. A.; Siebers, A. K. & Jiao, Y.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A 10,000 groove/mm multilayer coated grating for EUV spectroscopy

Description: Ultra-high spectral resolution in the EUV and soft x-ray energy ranges requires the use of very high line density gratings with optimal design resulting in use of a Blazed Multilayer Grating (BMG) structure. Here we demonstrate the production of near-atomically perfect Si blazed substrates with an ultra-high groove density (10,000 l/mm) together with the measured and theoretical performance of an Al/Zr multilayer coating on the grating. A 1st order absolute efficiency of 13percent and 24.6perce… more
Date: February 7, 2011
Creator: Voronov, Dmytro; Anderson, Erik; Cambie, Rossana; Cabrini, Stefano; Dhuey, Scott; Goray, Leonid et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

13.2 nm Table-Top Inspection Microscope for Extreme Ultraviolet Lithography Mask Defect Characterization

Description: We report on a reflection microscope that operates at 13.2-nm wavelength with a spatial resolution of 55{+-}3 nm. The microscope uses a table-top EUV laser to acquire images of photolithography masks in 20 seconds.
Date: April 7, 2009
Creator: Brizuela, F.; Wang, Y.; Brewer, C.; Pedaci, F.; Chao, W.; Anderson, E. et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

15 KJ FLASH LAMP, POWER CONDITIONING UNIT DESIGNED FOR SAFTY, RELIABILITY & MANUFACTURABILITY*

Description: A 15kJoule, Flash Lamp Power Conditioning Unit has been successfully designed, developed, and deployed in the National Ignition Facility (NIF) Preamplifier Modules (PAM). The primary design philosophy of this power conditioning unit (PCU) is safety, reliability, and manufacturability. Cost reduction over commercially equivalent systems was also achieved through an easily manufactured packaging design optimized to meet NIF requirements. While still maintaining low cost, the PCU design includes a… more
Date: August 7, 2007
Creator: James, G.; Merritt, B.; Dreifuerst, G.; Strickland, S. & Tse, E.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

25 Can Verification Report for the LLNL Plutonium Packaging System (PuPS)

Description: This document reports the results of the 25 Can Verification Run. The 25 Can Verification Run was performed as outlined in Section 1.d of SRS Acceptance Criteria (Reference 1). The run was performed over the period of February 16 to the 28, 2001. Each of these cans was welded with a dummy Inner Can containing about 5 kg of surrogate material. The cans were then analyzed using radiography and metallography of samples taken at four locations of the weld. The radiographs were examined for porosity… more
Date: May 7, 2001
Creator: Riley, D C & Dodson, K E
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

100 Areas technical activities report - physics, December 1946

Description: This report summarizes physics experiments carried out in different parts of the 100 area at Hanford during December, 1946. This included work on the D pile, F pile, and experiments aimed at studying the irradiation properties of graphite and metal samples exposed to different radiation environments. Pile tests included reactivity tests, calibrations of control rods, and power coefficient tests.
Date: January 7, 1947
Creator: Montgomery, E. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

225-B Pool Cell 5 Liner Leak Investigation

Description: This document describes the actions taken to confirm and respond to a very small (0.046 ml/min) leak in the stainless steel liner of Hanford`s Waste Encapsulation and Storage Facility (WESF) storage pool cell 5 in Building 225-B. Manual level measurements confirmed a consistent weekly accumulation of 0.46 liters of water in the leak detection grid sump below the pool cell 5 liner. Video inspections and samples point to the capsule storage pool as the source of the water. The present leak rate c… more
Date: June 7, 1996
Creator: Rasmussen, J.H., Westinghouse Hanford
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

300 Area Disturbance Report

Description: The objective of this study was to define areas of previous disturbance in the 300 Area of the U.S. Department of Energy (DOE) Hanford Site to eliminate these areas from the cultural resource review process, reduce cultural resource monitoring costs, and allow cultural resource specialists to focus on areas where subsurface disturbance is minimal or nonexistent. Research into available sources suggests that impacts from excavations have been significant wherever the following construction activ… more
Date: January 7, 1999
Creator: Hale, L. L.; Wright, M. K. & Cadoret, N. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

300 Area Liquid Effluent Facilities (LEF) Authorization Envelope

Description: The purpose of this document is to establish the facility Authorization Envelope (AE) for the 300 Liquid Effluent Facilities (LEP )Project and identify the requirements related to the maintenance of the AE as Specified in HNF-PRO-2701, Authorization Envelope and Authorization Agreement. The 300 LEF Project consists of two separate facilities operating under one management organization. They are the 310 Facility and the 340 Facility. The AE documents the limits of operations for all 300 LEF Proj… more
Date: April 7, 2000
Creator: WRIGHT, E.J. & STORDEUR, R.T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

340 Representative sampling verification tank sampling and analysis plan

Description: This Sampling and Analysis Plan contains requirements for characterizing the 340 vault tank 1. The objective of the sampling and characterization is to determine if the tank is homogeneous when agitated and which sampling method provides the most representative sample. A secondary objective is to collect and characterize solid samples.
Date: August 7, 1996
Creator: Olander, A.R., Westinghouse Hanford
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

450/sup 0/F step transient thermal analysis of the LOFT pressurizer surge and spray line piping

Description: The LOFT pressurizer spray and surge line piping was analyzed for a 450/sup 0/F step change in fluid temperature. This transient was chosen to conservatively represent several pressurizer operating transients that had not previously been analyzed. These include temperature transients resulting from a 300/sup 0/F ..delta..T between pressurizer temperature and cold leg temperature, injection of a cooled (70/sup 0/F) slug of stagnant fluid into the hot (540/sup 0/F) spray line piping, and inflow o… more
Date: July 7, 1977
Creator: Tolan, B.J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

1996 Central New Mexico Section [American Chemical Society] annual report

Description: The main goal of the Central New Mexico Section this year was to increase attendance at the local meetings. Throughout the course of the year attendance at the meeting more than doubled. This was brought on by several factors: having the meeting spread throughout the section (Albuquerque, Santa Fe, Las Vegas, Socorro, Los Alamos); supplementing the ACS National Tour speakers with interesting local sections speakers; and making full use of the newly formed Public Relations Committee. Activities … more
Date: February 7, 1997
Creator: Cournoyer, M.E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

1997 Hanford site report on land disposal restrictions for mixed waste

Description: The baseline land disposal restrictions (LDR) plan was prepared in 1990 in accordance with the Hanford Federal Facility Agreement and Consent Order (commonly referred to as the Tn-Party Agreement) Milestone M-26-00 (Ecology et al, 1989). The text of this milestone is below. ''LDR requirements include limitations on storage of specified hazardous wastes (including mixed wastes). In accordance with approved plans and schedules, the U.S. Department of Energy (DOE) shall develop and implement techn… more
Date: April 7, 1997
Creator: Black, D.G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

1K RESERVOIR: EB WELDER, CE69412 REQUALIFICATION

Description: The EB Welder was qualified to produce the 1K retainer weld in February 2001. Since that time, several parts were replaced and metallography results from a review indicated that the welder was not operating properly. After testing the EB Welder, it was requalified to produce the 1K retainer weld.
Date: September 7, 2005
Creator: Schell, J. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen