1,373 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Tubes"  
Results: 1 - 24 next
open access

WELDING AND BRAZING OF HIGH-TEMPERATURE RADIATORS AND HEAT EXCHANGERS

Description: Procedures were developed for fabricating highperformance radiators and heat exchangers for the Aircraft Nuclear Propulsion (ANP) Program. These components, which contain multitudes of tube-to-tube sheet and tube-to-fin joints, are similar in design to those under consideration for a variety of space vehicle applications. In order to ensure reliability of the tube-to-tube sheet joints, techniques producing welds of extremely high quality were used and back brazing of the welds with a suitable a… more
Date: February 20, 1962
Creator: Slaughter, G.M. & Patriarca, P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division Unit Operations Section Monthly Progress Report, September 1961

Description: Nine samples of ThO/sub 2/ -UO/sub 2/ prepared as part of the solgel process development studies showed no consistent effects from small variations in several process parameters. The reaction of methane and copper oxide was studied. Engineering studies of the continuous dissolution of simulated U-Zr-Sn fuels in 6.5 M NH4F, 0.6-1.0 M NH/sub 4/NO/sub 3/, 0.1 M H/sub 2/O/sub 2/ were continued in modified 6-in.-dia. equipment. A total of 1642 kg of U from NaK bonded SRE Core I fuel rods wad dejacke… more
Date: April 1, 1962
Creator: Whatley, M. E.; Haas, P. A.; Horton, R. W.; Ryon, A. D.; Suddath, J. C. & Watson, C. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Electrical Resistivity of Molten and Solid Thorium-Magnesium Eutetic

Description: Electrical resistivity properties of polycrystalline 39 wt % thorium-- magnesium eutectic are reported for the solid from room temperature to its melting point at 589 deg C and as a liquid from its melting point to 900 deg C. The electrical resistivity of the eutectic at the melting point was 69.5 microhm- centimeters; it decreased to a value of 64.8 microhm-centimeters at 900 C. Tantalum tubing was used to contain the alloy in the molten state. (auth)
Date: May 1, 1962
Creator: Provow, D. M. & Fisher, R. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Coal Technology Program. Progress report for November 1977

Description: A block of Pittsburgh seam bituminous coal and a block of Wyodak subbituminous coal were pyrolyzed under reducing gas in support of in situ gasification. Information from previously completed block pyrolysis of bituminous coal under an argon atmosphere show that differences in evolved gas result from differences in heating rates. Compared to block pyrolysis at 0.3 C/sup 0//min, block pyrolysis at 3 C/sup 0//min produces less gas but gas with a higher heating value, yielding a higher overall pyr… more
Date: January 1, 1978
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A PROGRAM OF RESEARCH ON MECHANICAL METALLURGY AS RELATED TO FUEL-ELEMENT FABRICATION. Quarterly Progress Report for the Period Ending June 30, 1961

Description: Results of crawing experiments using 3/8-in. bars to provide rod and tube test specimens are reported. In mechanical metallurgy investigations on the relation of formability to imperfection structure the peierls potentials for dislocation of Nb, Mo, Ta, and W were measured. Design and construction of a microextensometer reported. The investigations of the effects of grain size on the stored energy cold work were extended to a new lot OFHC Cu. In studies of formability relations with imperfectio… more
Date: August 31, 1961
Creator: Trozera, T Z; Koyama, K; White, J L & Chambers, R H
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

PHYSICO-CHEMICAL STUDIES OF CLAD UO$sub 2$ IN POTENTIAL MELTDOWN ENVIRONMENTS.

Description: Behavior of zirconium alloy clad UO{sub 2} fuel elements in steam and air at 100 deg C to the melting point of UO{sub 2} was studied. Heating tests of Zircaloy-4 tubes with internal pressure show that steam oxidation of the metal results in lower deformation rates, less deformation, and higher failure temperature. Air oxidation of Zircaloy-4 is erratic and occurs at a greater rate than in steam due to the reaction with N in the air. Rate-controlling mechanism for UO{sub 2} oxidation by steam is… more
Date: October 31, 1969
Creator: White, J.F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Recycled used fluorescent light tube solar water heater. Final technical report

Description: A project to investigate methods that might be used to utilize old fluorescent light tubes as solar water heater components then to produce a booklet of instructions for others to use to construct their own water heaters is described. Various methods of opening, cleaning and shaping the ends of the tubes were attempted. The reflective material needed inside some of the heaters was mylar and worked quite well but the Btu gain was disappointing. There were problems with the cement used and epoxy … more
Date: January 1, 1979
Creator: Jaquette, F M
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Low strain diameter expansion of internally pressurized Zircaloy-4 tubing at high temperatures

Description: Tests of closed-end, internally pressurized, Zircaloy-4 tubing specimens were utilized to develop low strain creep characteristics as a function of time at temperatures in the range of 1475/sup 0/F to 2000/sup 0/F (802/sup 0/C to 1093/sup 0/C) and hoop stresses in the range of 250 to 2500 psi for use in loss-of-coolant accident (LOCA) analyses. The strain rate above the start of the alpha to beta phase transformation region, approximately 1490/sup 0/F (810/sup 0/C), was found to be sensitive to… more
Date: March 1978
Creator: White, L.S. & Busby, C.C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Detailed Stress Analysis of SM-1 Steam Generator Tube Sheet

Description: The detailed stress analysis of the SM-1 steam generator tube sheet showed it to be safe from strain cycling damage. However, the pressure stresses were greater than the yield strength during the hydrostatic test. The differential between pressure stresses and yield strength indicates that some initial deformation may have taken place in the tube sheet. (auth)
Date: July 11, 1962
Creator: Busuttil, J. J. & Chittum, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High temperature recuperator tests. Final report

Description: A demonstration and test program was conducted on a high temperature, two pass ceramic tube recuperator. Data pertaining to heat exchanger performance characteristics were collected and compared with calculated values. The effect of improved heat exchanger effectiveness on system fuel consumption was demonstrated. Changes in fuel flow as a function of combustion air preheat while maintaining a given heat load were demonstrated. The effects of excess air on fuel consumption with and without syst… more
Date: May 1, 1980
Creator: Bjerklie, J. W. & Penty, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Georgetown University atmospheric fluidized bed boiler cogeneration system

Description: This report presents the results of one year of operation of the cogeneration system capability of the Georgetown University coal- fired, atmospheric fluidized-bed (AFB) boiler. The AFB was designed and installed under a separate contract with the US Department of Energy. The AFB project funded by DOE to demonstrate that high sulfur coal could be burned in an environmentally acceptable manner in a urban environment such as Georgetown. In addition, operational data from the unit would assist the… more
Date: August 1, 1991
Creator: Podbielski, V. & Shaff, D.P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Tests of Bearing Materials for the Experimental Through-Tubes in the Egcr

Description: The four experimental through-tubes provided in the Experimental Gas Cooled Reactor will extend directly through the core of the reactor and penetrate both the upper and lower pressure vessel heads. Each tube is anchored in an upper head nozzle and the bottom end is allowed to slide in a lower head nozzle. This lower nozzle is basically a T'' section that provides bottom access to the through-tube and a side access for the piping which connects the throughtube to the experimenter's cell. Due to… more
Date: July 16, 1962
Creator: MacPherson, R. E. & Smith, A. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Theoretical Study of the Transient Operation and Stability of Two-Phase Natural Circulation Loops

Description: Mathematical models of the time-dependent behavior of two-phase natural- circulation loops were used to predict the operation and to explain the unusual instability sometimes observed. The initial results obtained for a loop similar to the Univ. of Minnesota loop were used to formulate a more complex and accurate model, and the predicted transient behavior was in close agreement with the experimental results from the Minnesota loop. For a 300psia, high-pressure loop, unstable oscillatory behavi… more
Date: June 1, 1961
Creator: Garlid, K.; Amundson, N. R. & Isbin, H. S.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries Government Documents Department
open access

Dynamic shear behavior of alumina-filled epoxy

Description: Thin-walled tubular specimens of alumina-filled epoxy were loaded in torsion at a strain rate of approximately 10/sup 3/ s/sup -1/ using a stored-torque Kolsky bar. In addition to measuring the time resolved shear stress and shear strain in the specimen, the axial stress generated by the dilation of the material during shear deformation was also obtained as a function of time. Tests were conducted at room temperature and at -60/sup 0/C. At room temperature, a moderate amount of plastic deformat… more
Date: March 1, 1982
Creator: Costin, L.S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen