611 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Metallurgy"  
Results: 1 - 24 next
open access

Safety rod latch inspection

Description: During an attempt to raise control rods from the 100 K reactor in December, one rod could not be withdrawn. Subsequent investigation revealed that a small button'' in the latch mechanism had broken off of the lock plunger'' and was wedged in a position that prevented rod withdrawal. Concern that this failure may have resulted from corrosion or some other metallurgical problem resulted in a request that SRL examine six typical latch mechanisms from the 100 L reactor by use of radiography and met… more
Date: February 1, 1992
Creator: Leader, D.R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Supporting Analysis for Thermal Suitability of Fuel Elements for SM-1A Core I Loading

Description: A recommended SM-1A Core I loading chart was derived from available, metallurgically acceptable elements at the SM-1A and SM-1 sites. The derivation was based on local thermal and hydraulic considerations of minimum elementto- element coolant channel clearances. These clearances were determined from field inspection measurements of outer fuel plate spacing, as modified by analytical calculations of plate ripple growth during exposure to reactor operating thermal stresses. (auth)
Date: January 10, 1962
Creator: Brondel, J. O.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A PROGRAM OF RESEARCH ON MECHANICAL METALLURGY AS RELATED TO FUEL-ELEMENT FABRICATION. Quarterly Progress Report for the Period Ending June 30, 1961

Description: Results of crawing experiments using 3/8-in. bars to provide rod and tube test specimens are reported. In mechanical metallurgy investigations on the relation of formability to imperfection structure the peierls potentials for dislocation of Nb, Mo, Ta, and W were measured. Design and construction of a microextensometer reported. The investigations of the effects of grain size on the stored energy cold work were extended to a new lot OFHC Cu. In studies of formability relations with imperfectio… more
Date: August 31, 1961
Creator: Trozera, T Z; Koyama, K; White, J L & Chambers, R H
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

CHEMICAL ENGINEERING DIVISION SUMMARY REPORT, JULY, AUGUST, SEPTEMBER, 1961

Description: Development activities are reported on pyrometallurgical processes including melt refining and those using liquid metal solvents. Development of processing facilities for EBR II is also reported. In other work, laboratory- and engineering-scale investigations on fluoride volatility processes were condueted, and conversion of UF/sub 6/ to UO/sub 2/ was studied. Investigations are also reported concerning the kinetics of metal ignition and oxidation, and metalwater reactions. In work associated w… more
Date: October 31, 1962
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Metals and Ceramics Division. Annual progress report, ending June 30, 1980

Description: Research is reported concerning: (1) engineering materials, including materials compatibility, mechanical properties, nondestructive testing, pressure vessel technology, and welding and brazing; (2) fuels and processes consisting of ceramic technology, fuel cycle technology, fuels evaluation, fuel fabrication and metals processing; and (3) materials science which includes, ceramic studies, physical metallurgy properties, radiation effects and microstructural analysis, metastable and superconduc… more
Date: September 1, 1980
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

MOLTEN-SALT REACTOR PROGRAM PROGRESS REPORT FOR PERIOD FROM MARCH 1 TO AUGUST 31, 1961

Description: The Molten Salt Reactor Experiment design, component development, and engineering analysis is discussed. Materials studies for the Molten-Salt Reactor Program including metallurgy, in-pile tests, chemistry, engineering research, and fuel processing are described. (M.C.G.)
Date: January 19, 1962
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

SNAP Programs: Task 6--Fuel Technology Development Program. Quarterly Progress Report No. 7, April 1 Through June 30, 1961

Description: Progress made in the development of isotope power sources for thermoelectric and thermionic conversion to electrical energy is reported. The Heavy Elements Processing Facility for processing americium and fabricating americium capsules for irradiation was opened and hot operation was begun. Modifications to the americium purification system were completed and checkout operations were begun. Process specifications were established for dissolution of the irradiated capsules and the major equipmen… more
Date: October 31, 1962
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

THE PHYSICS DESIGN OF THE EBR-II

Description: The physics design problems of the EBR-II are summarized. These include analysis of the EBR-II engineering design as well as applicable zero-power critical experiments. Pertinent reactor safety problems are reviewed. Safety considerations bearing on normal plant operation and manipulations within the reactor are emphasized. The implication of controlled in-pile meltdown experiments is considered. Irradiation damage and metallurgical phase phenomena are summarized and related to reactivity. The … more
Date: July 1, 1961
Creator: Loewenstein, W.B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

DEVELOPMENT OF PLUTONIUM-BEARING FUEL MATERIALS. Progress Report, October 1-December 31, 1961

Description: Continued effort is reported on preparation and characterization of PuO/ sub 2/ and UO/sub 2/-- PuO/sub 2/ mixtures. Sintering and characterization of pellets for irradiation tests was emphasized, and efforts were also devoted to plasma torch production of spherical PuO /sub 2/ and coating of oxide materials. PuO/sub 2/ produced by the oxalate process from low concentration feed contains agglomerates which are not readily broken down, while that produced from normal feed contains larger agglome… more
Date: October 31, 1962
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

REACTOR LABORATORY EXPERIMENTS

Description: An exposition is presented comprising a basic set of experiments in reactor physics, engineering, and technology developed by the International Institute of Nuclear Science and Engineering. Twenty-two experiments are included in a program which may be divided into groups associated with the Argonaut Reactor, the AGN-201 Reactor, and with other reactors or auxiliary equipment. (J.R.D.)
Date: August 1, 1961
Creator: Sturm, W.J. ed.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

METALLURGY DIVISION ANNUAL PROGRESS REPORT FOR PERIOD ENDING MAY 31, 1961

Description: >Fundamental Alloying. Studies of crystal structures, reactions at metal surfaces, spectroscopy of molten salts, mechanical deformation, and alloy theory are reported. Long-Range Applied Metallurgy. A thermal comparator is described and the characteristic temperature of U0/sub 2/ determined. Sintering studies were carried out on ThO/sub 2/. The diffusion of fission products in fuel and of Al/sup 26/ and Mn/sup 54/ in Al and the reaction of Be with UC were studied. Transformation and oxidation d… more
Date: August 17, 1961
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Failure of sheathed thermocouples due to thermal cycling

Description: Open circuit failures (up to 100%) in small-diameter thermocouples used in electrically heated nuclear fuel rod simulator prototypes during thermal cycling tests were investigated to determine the cause(s) of the failures. The experiments conducted to determine the relative effects of differential thermal expansion, wire size, grain size, and manufacturing technology are described. It was concluded that the large grain size and embrittlement which result from certain common manufacturing anneal… more
Date: March 1, 1982
Creator: Anderson, R.L. & Ludwig, R.L.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Some recent observations on the radiation behavior of uranium silicide dispersion fuel

Description: Addition of B{sub 4}C burnable poison results in higher plate swelling in both U{sub 3}Si{sub 2} and U{sub 3}Si-Al dispersion fuel plates and also decreases the blister threshold temperature of these plates. Prolonged annealing of U{sub 3}Si{sub 2}-Al fuel plates produced no blister after 696 hours at 400{degrees}C. Blister formation started between 257 hours and 327 hours at 425{degrees}C and between 115 hours and 210 hours at 450{degrees}C. Operation with breached cladding resulted in pillowi… more
Date: January 1, 1988
Creator: Hofman, G.L.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Chemical Engineering Division Fuel Cycle Programs. Quarterly progress report, January-March 1979

Description: In the program on pyrochemical and dry processing methods (PDPM) for nuclear fuel, corrosion testing of refractory metals and alloys, graphite, and SiC in PDPM environments was done. A tungsten-metallized Al/sub 2/O/sub 3/-3% Y/sub 2/O/sub 3/ crucible was successfully fabricated. Tungsten microstructure of a plasma-sprayed tungsten crucible was stabilized by nickel infiltration and heat treatment. Solubility measurements of Th in Cd and Cd-Mg alloys were continued, as were experiments to study … more
Date: January 1, 1980
Creator: Steindler, M J; Ader, M & Barletta, R E
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

CHEMICAL ENGINEERING DIVISION SUMMARY REPORT, APRIL, MAY, JUNE 1961

Description: Developments in chemical engineering are described. Pyrometallurgical development, fuel-processing facilities for EBR-II, pyrometallurgical research, laboratory and engineering-scale investigations of fluoride volatility processes, conversion of UF/sup 6/ to UO/sup 2/, calcination studies in small-diamenter columns, metal oxidation and ignition kinetics, metal-water reactions, determination of nuclear constants, thermally regenerative emf cell, thermoelectricity research, reactor decontaminatio… more
Date: October 1, 1961
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

CHEMICAL ENGINEERING DIVISION SUMMARY REPORT, JANUARY-MARCH 1962

Description: Additional experiments conducted on nitridation of irradiated U-fissium fuel pins revealed that irradiation does not greatly affect the nitridation rate at 300 deg C. In skullreclamation development, a phase separation common to both the blanket- and skull-processes was investigated in which a 50% Mg-- Zn supernatant solution was removed from precipitated U metal. In most runs the supernatant phase was removed with negligible U entrainment. The reduction rate of ZrO by Zn--Mg solution under sku… more
Date: June 1, 1962
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Ceramic and cermet targets

Description: Use of isotopic materials as targets in high temperature environments, e.g., reactor cores, require that chemically stable forms of the isotopes be employed. Usually oxides are compatible with temperatures > 1600/sup 0/K, although some light element oxides exhibit some volatility at temperatures > 1300/sup 0/K. Especially in the case of heavy elements, the relatively low melting points of the metals, poor compatibility of the metals with encapsulation materials, and high chemical reactivity at … more
Date: January 1, 1979
Creator: Kobisk, E. H.; Quinby, T. C. & Aaron, W. S.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

DEVELOPMENT OF PLUTONIUM BEARING FUEL MATERIALS. Progress Report for period July 1 through September 30, 1961

Description: Data are tabulated for the characteristic parameters of PuO/sub 2/ powders prepared by the continuous oxalate precipitation process. The results show that the PuO/sub 2/ surface area decreases almost linearly with calcination hold times at 760 deg C. A thermogravimetric study of the decomposition of Pu oxalate indicate the formation of an initial stable compound at ~ l00 deg C and a stable intermediate at ~ 300 deg C. Characteristic data are tabulated for UO/sub 2/ -5% PuO/sub 2/ and UO/sub 2/-… more
Date: October 31, 1962
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The EDM surface: Topography, chemistry, and metallurgy

Description: The surface created by the electric discharge machining (EDM) process is of special interest because it has been shown to have a negative effect on the fatigue properties of many alloys. An understanding of the surface metallurgy and chemistry is important in predicting those alloys which are most susceptible to failure. Remedial actions, including thickness minimization, alteration, or removal of the surface layer are addressed.
Date: January 1, 1991
Creator: Fuller, J.E.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Investigation of the sintering kinetics of lead powders. Final technical report

Description: An analysis of the parameters involved in the sintering of lead powders under vacuum has been made. Sintering was accomplished at temperatures between 250/sup 0/ and 280/sup 0/C. Evaluation of surface area reduction data results in values of the mechanism exponent N between 5.3 and 6.7. Lack of shrinkage and the low vapor pressure of lead at the experimental temperatures lead to the conclusion that surface diffusion is the rate-controlling sintering mechanism. However, comparison of the experim… more
Date: August 1, 1977
Creator: Higgins, P. K. & Munir, Z. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen