Search Results

open access

Landing characteristics of an autogiro

Description: An investigation to determine the rate of descent, the horizontal velocity, and the attitude at contact of an autogiro in landings was made by the National Advisory Committee for Aeronautics at the request of the Bureau of Air Commerce, Department of Commerce. The investigation covered various types of landings. The results of the investigation disclosed that the maximum rate of descent at contact with the ground (10.6 feet per second) was less than the minimum rate of descent attainable in a s… more
Date: November 1934
Creator: Peck, William C.
Partner: UNT Libraries Government Documents Department
open access

Tank Tests of Flat and V-Bottom Planning Surfaces

Description: "Four planing surfaces, all having beams of 16 inches and lengths of 60 inches but varying in dead rise by 10 degrees increments from 0 degrees to 30 degrees, were tested in the N.A.C.A. tank. The results cover a wide range of speed, loads, and trim angles, and are applicable to a variety of problems encountered in the design of seaplanes. The data are analyzed to determine the characteristics of each surface at the trim angle giving minimum resistance for all the speed and loads tested. A plan… more
Date: November 1934
Creator: Shoemaker, James M.
Partner: UNT Libraries Government Documents Department
open access

The Calculated Effect of Trailing-Edge Flaps on the Take-Off of Flying Boats

Description: "The results of take-off calculations are given for an application of simple trailing-edge flaps to two hypothetical flying boats, one having medium wing and power loading and consequently considerable excess of thrust over total resistance during the take-off run, the other having high wing and power loading and a very low excess thrust. For these seaplanes the effect of downward flap settings was: (1) to increase the total resistance below the stalling speed, (2) to decrease the get-away spee… more
Date: November 1934
Creator: Parkinson, J. B. & Bell, J. W.
Partner: UNT Libraries Government Documents Department
open access

A study of the pitching moments and the stability characteristics of monoplanes

Description: "This note presents a study of the pitching moments and the stability characteristics of monoplanes. Expressions for the pitching-moment coefficient and the Diehl stability coefficient for the monoplane are developed, suitable for the use of airplane designers. The effective difference between the high-wing and low-wing types is portrayed and discussed. Comparisons between experimental and computed values are made. Charts for use in the solution of numerical values of the pitching-moment and st… more
Date: November 1934
Creator: Higgins, George J.
Partner: UNT Libraries Government Documents Department
open access

Manual of Fire-Loss Prevention

Description: Principles of fire-resistance classifications of building types and materials, general methods for controlling the spread of fire, and general fire-prevention measures.
Date: November 5, 1934
Partner: UNT Libraries Government Documents Department
open access

The Processes in Spring-Loaded Injection Valves of Solid Injection Oil Engines

Description: "On the premise of a rectangular velocity wave arriving at the valve, the equation of motion of a spring-loaded valve stem is developed and analyzed. It is found that the stem oscillates, the oscillation frequency being consistently above the natural frequency of the nozzle stem alone, and whose amplitudes would increase in the absence of damping. The results are evaluated and verified on an example" (p. 1).
Date: November 1934
Creator: Lutz, O.
Partner: UNT Libraries Government Documents Department
open access

Potential Flow About Elongated Bodies of Revolution

Description: "This report presents a method of solving the problem of axial and transverse potential flows around arbitrary elongated bodies of revolution. The solutions of Laplace's equation for the velocity potentials of the axial and transverse flows, the system of coordinates being an elliptic one in a meridian plane, are given. The theory is applied to a body of revolution obtained from a symmetrical Joukowsky profile, a shape resembling an airship hull" (p. 189).
Date: November 12, 1934
Creator: Kaplan, Carl
Partner: UNT Libraries Government Documents Department
open access

Flight Investigation of Lateral Control Devices for Use With Full-Span Flaps

Description: This report presents the results of flight tests made on five different lateral control devices that appeared adaptable to wings fitted with full span flaps: controllable auxiliary airfoils (airfoils mounted above and forward of the leading edge of the wings), external ailerons (airfoils mounted above the wing and slightly forward of its maximum ordinate), upper-surface ailerons (similar to split trailing-edge flaps except that they constitute the upper surface of the wing), ailerons that retra… more
Date: November 7, 1934
Creator: Soulé, H. A. & McAvoy, W. H.
Partner: UNT Libraries Government Documents Department
open access

Spinning characteristics of wings 1: rectangular Clark Y monoplane wing

Description: "A series of wind tunnel tests of a rectangular Clark Y wing was made with the NACA spinning balance as part of a general program of research on airplane spinning. All six components of the aerodynamic force and moment were measured throughout the range of angles of attack, angles of sideslip, and values omega b/2v likely to be attained by a spinning airplane; the results were reduced to coefficient form. It is concluded that a conventional monoplane with a rectangular Clark y wing can be made … more
Date: November 21, 1934
Creator: Bamber, M. J. & Zimmerman, C. H.
Partner: UNT Libraries Government Documents Department
open access

The drag of airplane wheels, wheel fairings, and landing gears - 3

Description: The tests reported in this report conclude the investigation of landing-gear drag that has been carried out in the NACA 20-foot wind tunnel. They supplement earlier tests (reported in Technical Report No. 485) made with full-scale dummy wheels, wheel fairings, and landing gears intended for airplanes of 3,000 pounds gross weight and include tests of tail wheels and tail skids.
Date: November 21, 1934
Creator: Herrnstein, William H., Jr. & Biermann, David
Partner: UNT Libraries Government Documents Department
open access

Paris Aviation Salon, 1934

Description: This document reviews the Air show held in Paris in 1934. It includes charts and pictures of the aircraft which were from all parts of Europe.
Date: November 29, 1934
Partner: UNT Libraries Government Documents Department
Back to Top of Screen