Search Results

Advanced search parameters have been applied.
open access

9-Zoom : A One-Dimensional, Multigroup, Neutron Diffusion Theory Reactor Code for the IBM 709 [Supplement]

Description: The following document describes the usage of the LRL 9-ZOOM code, a neutron diffusion theory reactor code for the IBM 709. The code has been modified to solve configuration of a series of stacked cylindrical disks, designating a new geometry case.
Date: July 12, 1960
Creator: Stone, S. P.
Partner: UNT Libraries Government Documents Department
open access

Discussion on Optimization of Large Oil-Pumped Ultra-High Vacuum Systems

Description: Abstract: "Discussion is directed toward eventual optimization of the largest diffusion-pump systems. Less than 100 diffusion pump fluid molecules per cm 2/sec are possible to detect using an accumulation method. Optimization discussed demands highest possible system speed compatible with the above contamination rate. Bakeable oil diffusion pump systems, with equal orifice valve-tap units, without conventional baffling, permit theoretical through-put speeds up to 0.3 of the system orifice. The … more
Date: September 12, 1960
Creator: Milleron, Norman & Levenson, L. L.
Partner: UNT Libraries Government Documents Department
open access

Plutonium Oxide- Plastic Mixtures for Critical Mass Studies

Description: Critical mass experiments to be conducted at HAPO will require dilute and concentrated plutonium solutions. Since very high plutonium concentrations (~2,000 g/l) cannot be attained in pumpable solutions, solid plutonium compounds will be utilized for this phase of the work. Mixtures of plutonium oxide and polyethylene, methyl methacrylate or paraffin compacted in containers have been considers for use in highly-concentrated plutonium systems of known hydrogen to plutonium atomic ratio (H/Pu).
Date: May 12, 1960
Creator: Crocker, H. W.
Partner: UNT Libraries Government Documents Department
open access

Completion Report An Automatic Fuel Element Stamping Machine

Description: This document will be concerned with the design, operation and maintenance of an automatic fuel element stamping machine. In order to take advantage of automatic unloading and length checking at the Acme-Gridley lathes in the 313 Building, automatic stamping of fuel elements is desirable. This, along with the need for a permanent canning line identification, resulted in a request for a machine to automatically stamp HAPO fuel elements on a production basis.
Date: January 12, 1960
Creator: Allen, C. H.
Partner: UNT Libraries Government Documents Department
open access

Disposition of Contaminated Processing Equipment at Hanford Atomic Products Operation 1958-1959

Description: Operating plant experiences in restoring to useful service failed equipment contaminated through exposures to radioactive processes is of international interest to the nuclear industry. In accordance with a request from the Hanford Operations Office of the United States Atomic Energy Commission this report of the various measures taken in rehabilitating for re-use expensive engineered equipment has been compiled by the General Electric Company. This report is a review and summary of the dispos… more
Date: February 12, 1960
Creator: Kingsley, P. S.
Partner: UNT Libraries Government Documents Department
open access

Once Through Decontamination Studies- Interim Report No. 1.

Description: The decontamination of the present Hanford reactors involves a once-through cleaning operation. Considerable interest has also been shown in determining the feasibility of this once-through technique for cleanup of certain portions of the NPR system. This report contains information on a series of tests performed in the 242-B single pass flow facility. Information concerning the following are presented: (1) Efficiency of decontaminating KER Loop 1 and 2 contaminated specimens. (2) Efficiency of… more
Date: January 12, 1960
Creator: Perrigo, L. D. & Hekenson, J. F.
Partner: UNT Libraries Government Documents Department
open access

Final Report of Piping Components for Organic Coolants

Description: Organic compounds with high boiling points and low corrosion qualities have been considered for use as reactor coolants and moderators. Those being considered, however, have a greater tendency to leak than does water. A program to evaluate mechanical closures to be used for a leak-tight system for organic fluids has been established. Report HW-59446 covered descriptions of the facility used in this study and the primary results of tests covering two liquids, fittings, and instrumentation. This … more
Date: January 12, 1960
Creator: Floyd, H. L.
Partner: UNT Libraries Government Documents Department
open access

Photodisintegration Cross Section of Beryllium Near Threshold

Description: Abstract. The cross section of photoneutron production in Be9 at energies of 1.692, 1.720, and 1.78 Mev has been investigated using radioisotope gamma-ray sources. Neutron counting was by manganous sulfate bathe and a long counter. Gamma-ray counting was by a scintillation spectrometer consisting of a NaI(T1) scintillation crystal and a 256 channel pulse-height analyzer. A theoretical treatment of the P [right arrow] S transition near threshold using square-well potentials is also presented.
Date: May 12, 1960
Creator: Prosser, John M. & John, Walter, Jr.
Partner: UNT Libraries Government Documents Department
open access

Solid State Division Semiannual Progress Report For Period Ending February 28, 1955

Description: This semiannual progress report and future reports will be published as two documents to permit a wider distribution of the unclassified material. The report numbers are assigned in sequence so that the two reports will fall together when filed by report number.
Date: July 12, 1960
Creator: Billington, D. S. & Crawford, J. H., Jr.
Partner: UNT Libraries Government Documents Department
open access

PRTR Calandria Fabrication Report

Description: The Plutonium Recycle Test Reactor is heavy water moderated with a heavy or light water reflector contained by a complex aluminum vessel called a Calandria. ( See Figure 1). Construction of this vessel started in August, 1958, at a large West Coast vendor's plant and was completed at Hanford in December, 1959. The fabrication problems associated with a high integrity welded aluminum vessel were generally unrealized prior to this period. This report covers the fabrication of the Calandria and li… more
Date: July 12, 1960
Creator: Pedersen, L. T. & Kreiter, M. R.
Partner: UNT Libraries Government Documents Department
open access

Invention Report: Hermetically Sealed Closure on a Sheathed Thermocouple

Description: Applications of sheathed (metal) thermocouples may require in many instances, the insertion of the thermocouple thermal junction into an area that must be hermetically sealed to the outside. This same area usually contains highly reactive heat transfer medium such as an eutectic alloy of sodium and potassium of sodium alone. When fissionable materials are being irradiated, fission products that are driven off would also be present and must be contained under varying temperatures and pressures.
Date: July 12, 1960
Creator: Kosut, Bert S.
Partner: UNT Libraries Government Documents Department
open access

Operation Pre-Gnome: Seismic Data from Natural Phenomena and High-Explosive Tests Near Carlsbad, New Mexico

Description: Formulas derived from earlier work satisfactorily predicted low frequency ground effects resulting from the Pre-Gnome explosions, but they not predict high accelerations associated with high frequency ground waves. The Pre-Gnome experiments taken since indicated that accelerations and ground amplitudes are proportional to the explosive charge, but physical conditions limit extrapolation on this basis to relatively low yields. Predicted accelerations resulting from the 10 kt Gnome explosion in p… more
Date: January 12, 1960
Creator: Carder, Dean S.; Murphy, L. M.; Cloud, W. K. & Pearce, T. H.
Partner: UNT Libraries Government Documents Department
open access

Design and Development of a High-Temperature High-Pressure Spectrophotometer System: Status Report

Description: On 3/14/60 the Applied Physics Corporation was awarded a subcontract for the design and development of a high-temperature high-pressure spectrophotometer system based on the Cary Model 14pm Spectrophotometer insofar as possible, and consistent with our specifications, No. CTD-2, December 16, 1959.
Date: November 12, 1960
Creator: Biggers, R. E. & Wymer, R. G.
Partner: UNT Libraries Government Documents Department
open access

Use of Convergent and Asymptotic Series for Computation of the Modified Bessel Function of the First Kind.

Description: In the Communications of the ACM of April, 1960, p. 240, there appeared two Algol algorithms for the computation of In, the modified Bessel function of the first kind. One of these algorithms uses a convergent series and the other an asymptotic series. Their author, Dorothea S. Clarke, did not give any information with regard to which algorithm is more appropriate in a given situation (a given situation meaning the computation of In (x) for a definite pair of numbers n and x). Such information … more
Date: December 12, 1960
Creator: Bumgarner, L. L.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen