174 Matching Results

Search Results

prev Results: 73 - 96 next
open access

Coal-Mine Accidents in the United States, 1935

Description: Report compiled by the U.S. Bureau of Mines including statistics on fatal and non-fatal accidents in coal mines located in the United States as well as data regarding the various operations (e.g., number of miners employed and average production). The information is organized into tables for comparison and the text draws some overall conclusions in the summary.
Date: 1938
Creator: Adams, W. W.; Geyer, L. E. & Parry, M. G.
Partner: UNT Libraries Government Documents Department
open access

Metal-Mine Accidents in the United States During the Calendar Year 1935

Description: Report issued by the U.S. Bureau of Mines covering accidents that happened in metal mines located in the United States including statistics for injuries, fatalities, kinds and causes of accidents, and operational data, such as number of mine workers and shifts worked.
Date: 1938
Creator: Adams, W. W. & Kolhos, M. E.
Partner: UNT Libraries Government Documents Department
open access

Carbonizing Properties of West Virginia Coals and Blends of Coals From the Alma, Cedar Grove, Dorothy Powellton A, Eagle, Pocahontas and Beckley Beds

Description: From Introduction: "The composition and carbonizing properties of 33 coals previously tested have been given in technical papers of the Bureau of Mines and in short reports published for the most part in the Proceedings of the American Gas Association. A complete list of publications on the work previous to 1937 is appended to this report. The present report gives the composition and carbonizing properties of seven additional coals from West Virginia. The data include results of blending test i… more
Date: 1938
Creator: Fieldner, A. C.; Davis, J. D.; Selvig, W. A.; Thiessen, R.; Reynolds, D. A.; Holmes, C. R. et al.
Partner: UNT Libraries Government Documents Department
open access

Radium Protection

Description: Regulations for the safe handling of radium in radium therapy.
Date: 1938
Partner: UNT Libraries Government Documents Department
open access

FCC Reports, Volume 3, July 1, 1936 to February 28, 1937

Description: Biweekly, comprehensive compilation of decisions, reports, public notices, and other documents of the U.S. Federal Communications Commission.
Date: 1938
Creator: United States. Federal Communications Commission.
Partner: UNT Libraries Government Documents Department
open access

FCC Reports, Volume 4, March 1, 1937 to November 15, 1937

Description: Biweekly, comprehensive compilation of decisions, reports, public notices, and other documents of the U.S. Federal Communications Commission.
Date: 1938
Creator: United States. Federal Communications Commission.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of a 4-Engine Monoplane Showing Effects of Enclosing the Engines in the Wing and Comparisons of Tractor- and Pusher-Propeller Arrangements

Description: Report presenting testing in the full-scale wind tunnel on a model of a large 4-engine monoplane to determine the overall aerodynamic efficiency of a conventional wing-nacelle-engine installation as compared with power-plant installations enclosed in the wing with extension shafts to the propellers. Results regarding power-on and power-off performance for the installations as well as propeller noise are provided.
Date: April 1938
Creator: Silverstein, Abe & Wilson, Herbert A., Jr.
Partner: UNT Libraries Government Documents Department
open access

Methods of Testing Hosiery

Description: Report issued by the Bureau of Standards discussing laboratory testing of hosiery to determine production costs and to make comparisons. Different manufacturing methods and possible defects are presented. This report includes tables, illustrations, and photographs.
Date: October 11, 1938
Creator: Schenke, E. Max & Shearer, Howard E.
Partner: UNT Libraries Government Documents Department
open access

A Study of a Solvent Analytical Separation of Waxes from Petroleum and its Lubricating Fractions

Description: Report issued by the Bureau of Mines discussing studies conducted on the wax byproducts of crude petroleum. As stated in the scope of report, "this report discusses the principal methods given in the literature for the quantitative determination of wax in petroleum and its fractions by the use of selective solvents" (p. 3). This report includes tables, and illustrations.
Date: 1938
Creator: Horne, Joseph W. & Holliman, W. C.
Partner: UNT Libraries Government Documents Department
open access

The Effect of Continuous Weathering on Light Metal Alloys Used in Aircraft

Description: "An investigation of the corrosion of light metal alloys used in aircraft was begun at the National Bureau of Standards in 1925 and has for its purpose causes of corrosion in aluminum-rich and magnesium-rich alloys together with the development of methods for its prevention. The results, obtained in an extensive series of laboratory and weather-exposure tests, reveal the relative durability of a number of commercially available materials and the extent to which the application of various surfac… more
Date: December 2, 1938
Creator: Mutchler, Willard
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation of an NACA 23012 Airfoil with Various Arrangements of Slotted Flaps

Description: "An investigation was made in the 7 by 10-foot wind tunnel and in the variable-density wind tunnel of the NACA 23012 airfoil with various slotted-flap arrangements. The purpose of the investigation in the 7 by 10-foot wind tunnel was to determine the airfoil section aerodynamic characteristics as affected by flap shape, slot shape, and flap location. The flap position for maximum lift; polars for arrangements favorable for take-off and climb; and complete lift, drag, and pitching-moment charact… more
Date: February 12, 1938
Creator: Wenzinger, Carl J. & Harris, Thomas A.
Partner: UNT Libraries Government Documents Department
open access

The Column Strength of Two Extruded Aluminum-Alloy H-Sections

Description: "Extruded aluminum-alloy members of various cross sections are used in aircraft as compression members either singly or as stiffeners for aluminum-alloy sheet. In order to design such members, it is necessary to know their column strength or, in the case of stiffeners, the value of the double modulus, which is best obtained for practical purposes from column tests. Column tests made on two extruded h-sections are described, and column formulas and formulas for the ratio of the double modulus to… more
Date: September 30, 1938
Creator: Osgood, William R. & Holt, Marshall
Partner: UNT Libraries Government Documents Department
open access

The influence of directed air flow on combustion in spark-ignition engine

Description: "The air movement within the cylinder of the NACA combustion apparatus was regulated by using shrouded inlet valves and by fairing the inlet passage. Rates of combustion were determined at different inlet-air velocities with the engine speed maintained constant and at different engine speeds with the inlet-air velocity maintained approximately constant. The rate of combustion increased when the engine speed was doubled without changing the inlet-air velocity; the observed increase was about the… more
Date: October 10, 1938
Creator: Rothrock, A. M. & Spencer, R. C.
Partner: UNT Libraries Government Documents Department
open access

Mechanism of flutter: A theoretical and experimental investigation of the flutter problem

Description: From Summary: "The results of the basic flutter theory originally devised in 1934 and published as NACA Technical Report no. 496 are presented in a simpler and more complete form convenient for further studies. The paper attempts to facilitate the judgement of flutter problems by a systematic survey of the theoretical effects of the various parameters. A large number of experiments were conducted on cantilever wings, with and without ailerons, in the NACA high-speed wind tunnel for the purpose … more
Date: September 22, 1938
Creator: Theodorsen, Theodore & Garrick, I. E.
Partner: UNT Libraries Government Documents Department
open access

Tests in the variable-density wind tunnel of the NACA 23012 airfoil with plain and split flaps

Description: From Summary: "Section characteristics for use in wing design are presented for the NACA 23012 airfoil with plain and split flaps of 20 percent wing chord at a value of the effective Reynolds number of about 8,000,000. The flap deflections covered a range from 60 degrees upward to 75 degrees downward for the plain flap and from neutral to 90 degrees downward for the split flap. The split flap was aerodynamically superior to the plain flap in producing high maximum lift coefficients and in havin… more
Date: January 21, 1938
Creator: Abbott, Ira H. & Greenberg, Harry
Partner: UNT Libraries Government Documents Department
open access

Design of NACA Cowlings for Radial Air-Cooled Engines

Description: "The information on the propeller-cowling-nacelle combinations, presented in Technical Reports nos. 592, 593, and 596 and in Technical Note 620, is applied to the practical design of NACA cowlings. The main emphasis is placed on the method of obtaining the dimensions of the cowling; consequently, the physical functioning of each part of the cowling is treated very briefly. A practical method of designing cowlings and some examples are presented" (p. 383).
Date: March 5, 1938
Creator: Stickle, George W.
Partner: UNT Libraries Government Documents Department
open access

Downwash and Wake Behind Plain and Flapped Airfoils

Description: "Extensive experimental measurements have been made of the downwash angles and the wake characteristics behind airfoils with and without flaps and the data have been analyzed and correlated with the theory. A detailed study was made of the errors involved in applying lifting-line theory, such as the effects of a finite wing chord, the rolling-up of the trailing vortex sheet, and the wake. The downwash angles, as computed from the theoretical span load distribution by means of the Biot-Savart eq… more
Date: June 23, 1938
Creator: Silverstein, Abe; Katzoff, S. & Bullivant, W. Kenneth
Partner: UNT Libraries Government Documents Department
open access

Air Flow in the Boundary Layer of an Elliptic Cylinder

Description: From Introduction: "The present investigation was carried out for the purpose of supplementing the earlier work with information on the boundary layer under such conditions of air speed and turbulence that transition occurs and the layer is partly laminar and partly turbulent. In the work reported in reference 1, the air speed was about 12 feet per second, and it was assumed that the boundary layer remained in the laminar condition until after separation because the separation point remained fi… more
Date: August 6, 1938
Creator: Schubauer, G. B.
Partner: UNT Libraries Government Documents Department
open access

A study of air flow in an engine cylinder

Description: A 4-stroke-cycle test engine was equipped with a glass cylinder and the air movements within it were studied while the engine was being motored. Different types of air flow were produced by using shrouded intake valves in various arrangements and by altering the shape of the intake-air passage in the cylinder head. The air movements were made visible by mixing feathers with the entering air, and high-speed motion pictures were taken of them so that the air currents might be studied in detail an… more
Date: September 15, 1938
Creator: Lee, Dana W.
Partner: UNT Libraries Government Documents Department
open access

The knocking characteristics of fuels in relation to maximum permissible performance of aircraft engines

Description: An analysis is presented of the relationship of various engine factors to knock in preignition in an aircraft engine. From this analysis and from the available experimental data, a method of evaluating the knocking characteristics of the fuel in an aircraft-engine cylinder is suggested.
Date: September 14, 1938
Creator: Rothrock, A. M. & Biermann, Arnold E.
Partner: UNT Libraries Government Documents Department
open access

Tests of Two Full-Scale Propellers With Different Pitch Distributions, at Blade Angles Up to 60 Degrees

Description: "Two 3-blade 10-foot propellers were operated in front of a liquid-cooled engine nacelle. The propellers differed only in pitch distribution; one had normal distribution (nearly constant pitch for a blade angle of 15 degrees at 0.75 radius), and the other had the pitch of the tip sections decreased with respect to that for the shank sections (blade angle of 35 degrees for nearly constant pitch distribution). Propeller blade angles at 0.75r from 15 degrees to sixty degrees, corresponding to desi… more
Date: April 14, 1938
Creator: Biermann, David & Hartman, Edwin P.
Partner: UNT Libraries Government Documents Department
open access

The Compressibility Burble and the Effect of Compressibility on Pressures and Forces Acting on an Airfoil

Description: "Simultaneous air-flow photographs and pressure-distribution measurements were made of the NACA 4412 airfoil at high speeds to determine the physical nature of the compressibility burble. The tests were conducted in the NACA 24-inch high-speed wind tunnel. The flow photographs were obtained by the Schlieren method and the pressures were simultaneously measured for 54 stations in the 5-inch-chord airfoil by means of a multiple-tube manometer. Following the general program, a few measurements of … more
Date: July 6, 1938
Creator: Stack, John; Lindsey, W. F. & Littell, Robert E.
Partner: UNT Libraries Government Documents Department
open access

Design Charts for Predicting Downwash Angles and Wake Characteristics Behind Plain and Flapped Wings

Description: "Equations and design charts are given for predicting the downwash angles and the wake characteristics for power-off conditions behind plain and flapped wings of the types used in modern design practice. The downwash charts cover the cases of elliptical wings and wings of taper ratios 1, 2, 3, and 5, with aspect ratios of 6, 9, and 12, having flaps covering 0, 40, 70, and 100 percent of the span. Curves of the span load distributions for all these cases are included" (p. 1).
Date: July 14, 1938
Creator: Silverstein, Abe & Katzoff, S.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen