1,423 Matching Results

Search Results

prev Results: 49 - 72 next
open access

Measurement and Analysis of Wing and Tail Buffeting Loads on a Fighter Airplane

Description: "The buffeting loads measured on the wing and tail of a fighter airplane during 194 maneuvers are given in tabular form, along with the associated flight conditions. Measurements were made at altitudes of 30,000 to 10,000 feet and at speeds up to a Mach number of 0.8. Least-squares methods have been used for a preliminary analysis of the data. The agreement between the results of this analysis and the loads measured in stalls is sufficiently good to suggest the examination of the buffeting of o… more
Date: 1955
Creator: Huston, Wilber B. & Skopinski, T. H.
Partner: UNT Libraries Government Documents Department
open access

Calculations of Laminar Heat Transfer Around Cylinders of Arbitrary Cross Section and Transpiration-Cooled Walls With Application to Turbine Blade Cooling

Description: "An approximate method for the development of flow and thermal boundary layers in the laminar region on cylinders with arbitrary cross section and transpiration-cooled walls is obtained by the use of Karman's integrated momentum equation and an analogous heat-flow equation. Incompressible flow with constant property values throughout the boundary layer is assumed. The velocity and temperature profiles within the boundary layer are approximated by expressions composed of trigonometric functions"… more
Date: June 22, 1951
Creator: Eckert, E. R. G. & Livingood, J. N. B.
Partner: UNT Libraries Government Documents Department
open access

Comparison of performance of experimental and conventional cage designs and materials for 75-millimeter-bore cylindrical roller bearings at high speed

Description: From Summary: "The results of two investigations, one to determine the relative merits of four experimental and two conventional design 75-millimeter-bore (size 215) cylindrical roller bearings and one to determine the relative merits of nodular iron and bronze as cage materials for this size and type of bearing, are presented in this report. Nine test bearings were operated over a range of dn values (product of bearing bore in mm and shaft speed in r.p.m) from 0.3 x 10(6) to 2.3 x 20(6), radia… more
Date: June 30, 1954
Creator: Anderson, William J.; Macks, E. Fred & Nemeth, Zolton N.
Partner: UNT Libraries Government Documents Department
open access

Propagation of a free flame in a turbulent gas stream

Description: Effective flame speeds of free turbulent flames were measured by photographic, ionization-gap, and photomultiplier-tube methods, and were found to have a statistical distribution attributed to the nature of the turbulent field. The effective turbulent flame speeds for the free flame were less than those previously measured for flames stabilized on nozzle burners, Bunsen burners, and bluff bodies. The statistical spread of the effective turbulent flame speeds was markedly wider in the lean and r… more
Date: May 7, 1956
Creator: Mickelsen, William R. & Ernstein, Norman E.
Partner: UNT Libraries Government Documents Department
open access

Spark ignition of flowing gases

Description: Research conducted at the NACA Lewis Laboratory on ignition of flowing gases by means of long-duration discharges is summarized and analyzed. Data showing the effect of a flowing combustible mixture on the physical and electrical characteristics of spark discharges and data showing the effects of variables on the spark energy required for ignition that has been developed to predict the effect of many of the gas-stream and spark variables is described and applied to a limited amount of experimen… more
Date: June 20, 1956
Creator: Swett, Clyde C., Jr.
Partner: UNT Libraries Government Documents Department
open access

Cooperative Investigation of Relationship Between Static and Fatigue Properties of Wrought N-155 Alloy at Elevated Temperatures

Description: Report presents the correlation of extensive data obtained relating properties of wrought N-155 alloy under static, combined static and dynamic, and complete reversed dynamic stress conditions. Time period for fracture ranged from 50 to 500 hours at room temperature, 1,000 degrees, 1,200 degrees, and 1,500 degrees F.
Date: June 15, 1953
Creator: NACA Subcommittee on Power-Plant Materials
Partner: UNT Libraries Government Documents Department
open access

Contributions on the Mechanics of Boundary-Layer Transition

Description: "The manner in which flow in a boundary layer becomes turbulent was investigated on a flat plate at wind speeds generally below 100 feet per second. Hot-wire techniques were used, and many of the results are derived from oscillograms of velocity fluctuations in the transition region. Following a presentation of the more familiar aspects of transition, there are presented the very revealing facts discovered while studying the characteristics of artificially produced turbulent spots" (p. 853).
Date: February 28, 1955
Creator: Schubauer, G. B. & Klebanoff, P. S.
Partner: UNT Libraries Government Documents Department
open access

Development of craze and impact resistance in glazing plastics by multiaxial stretching

Description: The loss of strength of cast polymethyl methacrylate plastic as a result of crazing is of considerable importance to the aircraft industry. Because of the critical need for basic information on the nature of crazing and the effects of various treatments and environmental conditions on its incidence and magnitude, an investigation of this phenomenon was undertaken. The following factors were examined: (1) the effect of stress-solvent crazing on tensile strength of polymethyl methacrylate; (2) th… more
Date: December 28, 1955
Creator: Kline, G. M.; Wolock, I.; Axilrod, B. M.; Sherman, M. A.; George, D. A. & Cohen, V.
Partner: UNT Libraries Government Documents Department
open access

Lift Hysteresis at Stall as an Unsteady Boundary-Layer Phenomenon

Description: "Analysis of rotating stall of compressor blade rows requires specification of a dynamic lift curve for the airfoil section at or near stall, presumably including the effect of lift hysteresis. Consideration of the Magnus lift of a rotating cylinder suggests performing an unsteady boundary-layer calculation to find the movement of the separation points of an airfoil fixed in a stream of variable incidence. The consideration of the shedding of vorticity into the wake should yield an estimate of … more
Date: August 17, 1955
Creator: Moore, Franklin K.
Partner: UNT Libraries Government Documents Department
open access

Intensity, scale, and spectra of turbulence in mixing region of free subsonic jet

Description: Report presents the results of the measurements of intensity of turbulence, the longitudinal and lateral correlation coefficients, and the spectra of turbulence in a 3.5-inch-diameter free jet measured with hot-wire anemometers at exit Mach numbers from 0.2 to 0.7 and Reynolds numbers from 192,000 to 725,000.
Date: April 24, 1956
Creator: Laurence, James C.
Partner: UNT Libraries Government Documents Department
open access

Similar Solutions for the Compressible Laminar Boundary Layer with Heat Transfer and Pressure Gradient

Description: "Stewartson's transformation is applied to the laminar compressible boundary-layer equations and the requirement of similarity is introduced, resulting in a set of ordinary nonlinear differential equations previously quoted by Stewartson, but unsolved. The requirements of the system are Prandtl number of 1.0, linear viscosity-temperature relation across the boundary layer, an isothermal surface, and the particular distributions of free-stream velocity consistent with similar solutions. This sys… more
Date: October 15, 1954
Creator: Cohen, Clarence B. & Reshotko, Eli
Partner: UNT Libraries Government Documents Department
open access

An analysis of once-per-revolution oscillating aerodynamic thrust loads on single-rotation propellers on tractor airplanes at zero yaw

Description: A simplified procedure is shown for calculating the once-per-revolution oscillating aerodynamic thrust loads on propellers of tractor airplanes at zero yaw. The only flow field information required for the application of the procedure is a knowledge of the upflow angles at the horizontal center line of the propeller disk. Methods are presented whereby these angles may be computed without recourse to experimental survey of the flow field. The loads computed by the simplified procedure are compar… more
Date: March 21, 1955
Creator: Rogallo, Vernon L.; Yaggy, Paul F. & McCloud, John L., III
Partner: UNT Libraries Government Documents Department
open access

Nonlifting Wing-Body Combinations With Certain Geometric Restraints Having Minimum Wave Drag at Low Supersonic Speeds

Description: "Several variational problems involving optimum wing and body combinations having minimum wave drag for different kinds of geometrical restraints are analyzed. Particular attention is paid to the effect on the wave drag of shortening the fuselage and, for slender axially symmetric bodies, the effect of fixing the fuselage diameter at several points or even of fixing whole portions of its shape" (p. 113).
Date: August 4, 1955
Creator: Lomax, Harvard
Partner: UNT Libraries Government Documents Department
open access

An Analysis of the Effects of Aeroelasticity on Static Longitudinal Stability and Control of a Swept-Wing Airplane

Description: From Introduction: "The results of the aforementioned study are presented in this report together with the method of analysis employed. The net stability change is shown together with the individual contributions due to flexibility of wing, tail, and fuselage, both including and neglecting the effect of inertial loads."
Date: March 19, 1951
Creator: Skoog, Richard B.
Partner: UNT Libraries Government Documents Department
open access

Correlation, Evaluation, and Extension of Linearized Theories for Tire Motion and Wheel Shimmy

Description: "An evaluation is made of the existing theories of a linearized tire motion and wheel shimmy. It is demonstrated that most of the previously published theories represent varying degrees of approximation to a summary theory developed in this report which is a minor modification of the basic theory of Von Schlippe and Dietrich. In most cases where strong differences exist between the previously published theories and summary theory, the previously published theories are shown to possess certain d… more
Date: January 13, 1956
Creator: Smiley, Robert F.
Partner: UNT Libraries Government Documents Department
open access

Linearized Lifting-Surface and Lifting-Line Evaluations of Sidewash Behind Rolling Triangular Wings at Supersonic Speeds

Description: "The lifting-surface sidewash behind rolling triangular wings has been derived for a range of supersonic Mach numbers for which the wing leading edges remain swept behind the mark cone emanating from the wing apex. Variations of the sidewash with longitudinal distance in the vertical plane of symmetry are presented in graphical form. An approximate expression for the sidewash has been developed by means of an approach using a horseshoe-vortex approximate-lifting-line theory" (p. 455).
Date: October 21, 1955
Creator: Bobbitt, Percy J.
Partner: UNT Libraries Government Documents Department
open access

Theoretical Calculations of the Pressure, Forces, and Moments at Supersonic Speeds Due to Various Lateral Motions Acting on Thin Isolated Vertical Tails

Description: "Velocity potentials, pressure, distributions, and stability derivatives are derived by use of supersonic linearized theory for families of thin isolated vertical tails performing steady rolling, steady yawing, and constant-lateral-acceleration motions. Vertical-tail families (half-delta and rectangular plan forms) are considered for a broad Mach number range. Also considered are the vertical tail with arbitrary sweepback and taper ratio at Mach numbers for which both the leading edge and trail… more
Date: 1956
Creator: Margolis, Kenneth & Bobbitt, Percy J.
Partner: UNT Libraries Government Documents Department
open access

Theoretical span load distributions and rolling moments for sideslipping wings of arbitrary plan form in incompressible flow

Description: From Summary: "A method of computing span loads and the resulting rolling moments for sideslipping wings of arbitrary plan form in incompressible flow is derived. The method requires that the span load at zero sideslip be known for the wing under consideration. Because this information is available for a variety of wings, this requirement should not seriously restrict the application of the present method. The basic method derived herein requires a mechanical differentiation and integration to … more
Date: October 6, 1955
Creator: Queijo, M. J.
Partner: UNT Libraries Government Documents Department
open access

On boattail bodies of revolution having minimum wave drag

Description: The problem of determining the shape of slender boattail bodies of revolution for minimum wave drag has been reexamined. It was found that minimum solutions for Ward's slender-body drag equation can exist only for the restricted class of bodies for which the rate of change of cross-sectional area at the base is zero. In order to eliminate this restriction, certain higher order terms must be retained in the drag equation and isoperimetric relations. The minimum problem for the isoperimetric cond… more
Date: June 8, 1955
Creator: Harder, Keith C. & Rennemann, Conrad, Jr.
Partner: UNT Libraries Government Documents Department
open access

A study of the zero-lift drag-rise characteristics of wing-body combinations near the speed of sound

Description: "Comparisons have been made of the shock phenomena and drag-rise increments for representative wing and central-body combinations with those for bodies of revolution having the same axial developments of cross-sectional areas normal to the airstream. On the basis of these comparisons, it is concluded that near the speed of sound the zero-lift drag rise of a low-aspect-ratio thin-wing and body combination is primarily dependent on the axial development of the cross-sectional areas normal to the … more
Date: August 1, 1952
Creator: Whitcomb, Richard T.
Partner: UNT Libraries Government Documents Department
open access

Second-Order Subsonic Airfoil Theory Including Edge Effects

Description: "Several recent advances in plane subsonic flow theory are combined into a unified second-order theory for airfoil sections of arbitrary shape. The solution is reached in three steps: the incompressible result is found by integration, it is converted into the corresponding subsonic compressible result by means of the second-order compressibility rule, and it is rendered uniformly valid near stagnation points by further rules. Solutions for a number of airfoils are given and are compared with th… more
Date: 1956
Creator: Van Dyke, Milton D.
Partner: UNT Libraries Government Documents Department
open access

The proper combination of lift loadings for least drag on a supersonic wing

Description: From Summary: "Lagrange's method of undetermined multipliers is applied to the problem of properly combining lift loadings for the least drag at a given lift on supersonic wings. The method shows the interference drag between the optimum loading and any loading at the same lift coefficient to be constant. This is an integral form of the criterion established by Robert T. Jones for optimum loadings. The best combination of four loadings on a delta wing with subsonic leading edges is calculated a… more
Date: 1956
Creator: Grant, Frederick C.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel and Flight Investigations of the Use of Leading-Edge Area Suction for the Purpose of Increasing the Maximum Lift Coefficient of a 35 Degree Swept-Wing Airplane

Description: "An investigation was undertaken to determine the increase in maximum lift coefficient that could be obtained by applying area suction near the leading edge of a wing. This investigation was performed first with a 35 degree swept-wing model in the wind tunnel, and then with an operational 35 degree swept-wing airplane which was modified in accord with the wind-tunnel results. The wind-tunnel and flight tests indicated that the maximum lift coefficient was increased more than 50 percent by the u… more
Date: 1956
Creator: Holzhauser, Curt A. & Bray, Richard S.
Partner: UNT Libraries Government Documents Department
open access

Interaction of a Free Flame Front With a Turbulence Field

Description: "Small-perturbation spectral-analysis techniques are used to obtain the root-mean-square flame-generated turbulence velocities and the attenuating pressure fluctuations stemming from interaction of a constant-pressure flame front with a field of isotropic turbulence in the absence of turbulence decay processes. The anisotropic flame-generated turbulence velocities are found to be of about the same intensity as those of the incident isotropic turbulence, the lateral turbulence velocities being a… more
Date: January 25, 1955
Creator: Tucker, Maurice
Partner: UNT Libraries Government Documents Department
Back to Top of Screen