40 Matching Results

Search Results

Results: 1 - 24 next
open access

Investigation in the 7-by-10 Foot Wind Tunnel of Ducts for Cooling Radiators within an Airplane Wing

Description: Report presents the results of an investigation made in the NACA 7 by 10-foot wind tunnel of a large-chord wing model with a duct to house a simulated radiator suitable for a liquid-cooled engine. The duct was expanded to reduce the radiator losses, and the installation of the duct and radiator was made entirely within the wing to reduce form and interference drag. The tests were made using a two-dimensional-flow setup with a full-span duct and radiator. Section aerodynamic characteristics of t… more
Date: June 9, 1938
Creator: Harris, Thomas A. & Recant, Isidore G.
Partner: UNT Libraries Government Documents Department
open access

The Effect of Continuous Weathering on Light Metal Alloys Used in Aircraft

Description: "An investigation of the corrosion of light metal alloys used in aircraft was begun at the National Bureau of Standards in 1925 and has for its purpose causes of corrosion in aluminum-rich and magnesium-rich alloys together with the development of methods for its prevention. The results, obtained in an extensive series of laboratory and weather-exposure tests, reveal the relative durability of a number of commercially available materials and the extent to which the application of various surfac… more
Date: December 2, 1938
Creator: Mutchler, Willard
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation of an NACA 23012 Airfoil with Various Arrangements of Slotted Flaps

Description: "An investigation was made in the 7 by 10-foot wind tunnel and in the variable-density wind tunnel of the NACA 23012 airfoil with various slotted-flap arrangements. The purpose of the investigation in the 7 by 10-foot wind tunnel was to determine the airfoil section aerodynamic characteristics as affected by flap shape, slot shape, and flap location. The flap position for maximum lift; polars for arrangements favorable for take-off and climb; and complete lift, drag, and pitching-moment charact… more
Date: February 12, 1938
Creator: Wenzinger, Carl J. & Harris, Thomas A.
Partner: UNT Libraries Government Documents Department
open access

The Column Strength of Two Extruded Aluminum-Alloy H-Sections

Description: "Extruded aluminum-alloy members of various cross sections are used in aircraft as compression members either singly or as stiffeners for aluminum-alloy sheet. In order to design such members, it is necessary to know their column strength or, in the case of stiffeners, the value of the double modulus, which is best obtained for practical purposes from column tests. Column tests made on two extruded h-sections are described, and column formulas and formulas for the ratio of the double modulus to… more
Date: September 30, 1938
Creator: Osgood, William R. & Holt, Marshall
Partner: UNT Libraries Government Documents Department
open access

The influence of directed air flow on combustion in spark-ignition engine

Description: "The air movement within the cylinder of the NACA combustion apparatus was regulated by using shrouded inlet valves and by fairing the inlet passage. Rates of combustion were determined at different inlet-air velocities with the engine speed maintained constant and at different engine speeds with the inlet-air velocity maintained approximately constant. The rate of combustion increased when the engine speed was doubled without changing the inlet-air velocity; the observed increase was about the… more
Date: October 10, 1938
Creator: Rothrock, A. M. & Spencer, R. C.
Partner: UNT Libraries Government Documents Department
open access

Mechanism of flutter: A theoretical and experimental investigation of the flutter problem

Description: From Summary: "The results of the basic flutter theory originally devised in 1934 and published as NACA Technical Report no. 496 are presented in a simpler and more complete form convenient for further studies. The paper attempts to facilitate the judgement of flutter problems by a systematic survey of the theoretical effects of the various parameters. A large number of experiments were conducted on cantilever wings, with and without ailerons, in the NACA high-speed wind tunnel for the purpose … more
Date: September 22, 1938
Creator: Theodorsen, Theodore & Garrick, I. E.
Partner: UNT Libraries Government Documents Department
open access

Tests in the variable-density wind tunnel of the NACA 23012 airfoil with plain and split flaps

Description: From Summary: "Section characteristics for use in wing design are presented for the NACA 23012 airfoil with plain and split flaps of 20 percent wing chord at a value of the effective Reynolds number of about 8,000,000. The flap deflections covered a range from 60 degrees upward to 75 degrees downward for the plain flap and from neutral to 90 degrees downward for the split flap. The split flap was aerodynamically superior to the plain flap in producing high maximum lift coefficients and in havin… more
Date: January 21, 1938
Creator: Abbott, Ira H. & Greenberg, Harry
Partner: UNT Libraries Government Documents Department
open access

Design of NACA Cowlings for Radial Air-Cooled Engines

Description: "The information on the propeller-cowling-nacelle combinations, presented in Technical Reports nos. 592, 593, and 596 and in Technical Note 620, is applied to the practical design of NACA cowlings. The main emphasis is placed on the method of obtaining the dimensions of the cowling; consequently, the physical functioning of each part of the cowling is treated very briefly. A practical method of designing cowlings and some examples are presented" (p. 383).
Date: March 5, 1938
Creator: Stickle, George W.
Partner: UNT Libraries Government Documents Department
open access

Downwash and Wake Behind Plain and Flapped Airfoils

Description: "Extensive experimental measurements have been made of the downwash angles and the wake characteristics behind airfoils with and without flaps and the data have been analyzed and correlated with the theory. A detailed study was made of the errors involved in applying lifting-line theory, such as the effects of a finite wing chord, the rolling-up of the trailing vortex sheet, and the wake. The downwash angles, as computed from the theoretical span load distribution by means of the Biot-Savart eq… more
Date: June 23, 1938
Creator: Silverstein, Abe; Katzoff, S. & Bullivant, W. Kenneth
Partner: UNT Libraries Government Documents Department
open access

Air Flow in the Boundary Layer of an Elliptic Cylinder

Description: From Introduction: "The present investigation was carried out for the purpose of supplementing the earlier work with information on the boundary layer under such conditions of air speed and turbulence that transition occurs and the layer is partly laminar and partly turbulent. In the work reported in reference 1, the air speed was about 12 feet per second, and it was assumed that the boundary layer remained in the laminar condition until after separation because the separation point remained fi… more
Date: August 6, 1938
Creator: Schubauer, G. B.
Partner: UNT Libraries Government Documents Department
open access

A study of air flow in an engine cylinder

Description: A 4-stroke-cycle test engine was equipped with a glass cylinder and the air movements within it were studied while the engine was being motored. Different types of air flow were produced by using shrouded intake valves in various arrangements and by altering the shape of the intake-air passage in the cylinder head. The air movements were made visible by mixing feathers with the entering air, and high-speed motion pictures were taken of them so that the air currents might be studied in detail an… more
Date: September 15, 1938
Creator: Lee, Dana W.
Partner: UNT Libraries Government Documents Department
open access

The knocking characteristics of fuels in relation to maximum permissible performance of aircraft engines

Description: An analysis is presented of the relationship of various engine factors to knock in preignition in an aircraft engine. From this analysis and from the available experimental data, a method of evaluating the knocking characteristics of the fuel in an aircraft-engine cylinder is suggested.
Date: September 14, 1938
Creator: Rothrock, A. M. & Biermann, Arnold E.
Partner: UNT Libraries Government Documents Department
open access

Tests of Two Full-Scale Propellers With Different Pitch Distributions, at Blade Angles Up to 60 Degrees

Description: "Two 3-blade 10-foot propellers were operated in front of a liquid-cooled engine nacelle. The propellers differed only in pitch distribution; one had normal distribution (nearly constant pitch for a blade angle of 15 degrees at 0.75 radius), and the other had the pitch of the tip sections decreased with respect to that for the shank sections (blade angle of 35 degrees for nearly constant pitch distribution). Propeller blade angles at 0.75r from 15 degrees to sixty degrees, corresponding to desi… more
Date: April 14, 1938
Creator: Biermann, David & Hartman, Edwin P.
Partner: UNT Libraries Government Documents Department
open access

The Compressibility Burble and the Effect of Compressibility on Pressures and Forces Acting on an Airfoil

Description: "Simultaneous air-flow photographs and pressure-distribution measurements were made of the NACA 4412 airfoil at high speeds to determine the physical nature of the compressibility burble. The tests were conducted in the NACA 24-inch high-speed wind tunnel. The flow photographs were obtained by the Schlieren method and the pressures were simultaneously measured for 54 stations in the 5-inch-chord airfoil by means of a multiple-tube manometer. Following the general program, a few measurements of … more
Date: July 6, 1938
Creator: Stack, John; Lindsey, W. F. & Littell, Robert E.
Partner: UNT Libraries Government Documents Department
open access

Design Charts for Predicting Downwash Angles and Wake Characteristics Behind Plain and Flapped Wings

Description: "Equations and design charts are given for predicting the downwash angles and the wake characteristics for power-off conditions behind plain and flapped wings of the types used in modern design practice. The downwash charts cover the cases of elliptical wings and wings of taper ratios 1, 2, 3, and 5, with aspect ratios of 6, 9, and 12, having flaps covering 0, 40, 70, and 100 percent of the span. Curves of the span load distributions for all these cases are included" (p. 1).
Date: July 14, 1938
Creator: Silverstein, Abe & Katzoff, S.
Partner: UNT Libraries Government Documents Department
open access

Interference of Tail Surfaces and Wing and Fuselage from Tests of 17 Combinations in the N.A.C.A. Variable-Density Tunnel

Description: "An investigation of the interference associated with tail surfaces added to wing-fuselage combinations was included in the interference program in progress in the NACA variable-density tunnel. The results indicate that, in aerodynamically clean combinations, the increment of the high-speed drag can be estimated from section characteristics within useful limits of accuracy. The interference appears mainly as effects on the downwash angle and as losses in the tail effectiveness and varies with t… more
Date: November 5, 1938
Creator: Sherman, Albert
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation of an N.A.C.A. 23012 Airfoil with a Slotted Flap and Three Types of Auxiliary Flap

Description: An investigation was made in the N.A.C.A. 7- by 10-foot wind tunnel to determine the aerodynamic section characteristics of an N.A.C.A. 23012 airfoil with a single main slotted flap equipped successively with auxiliary flaps of the plain, split, and slotted types. A test installation was used in which an airfoil of 7-foot span was mounted vertically between the upper and the lower sides of the closed test section so that two-dimensional flow was approximated" (p. 699).
Date: October 31, 1938
Creator: Wenzinger, Carl J. & Gauvain, William E.
Partner: UNT Libraries Government Documents Department
open access

Tensile Elastic Properties of 18:8 Chromium-Nickel Steel as Affected by Plastic Deformation

Description: "The relationship between stress and strain, and between stress and permanent set, for 18:8 alloy as affected by prior plastic deformation is discussed. Hysteresis and creep and their effects on the stress-strain and stress-set curves are also considered, as well as the influence of duration of the rest interval after cold work and the influence of plastic deformation on proof stresses, on the modulus of elasticity at zero stress, and on the curvature of the stress-strain line. A constant (c su… more
Date: November 22, 1938
Creator: McAdam, D. J., Jr. & Mebs, R. W.
Partner: UNT Libraries Government Documents Department
open access

Heat-Transfer Processes in Air-Cooled Engine Cylinders

Description: "From a consideration of heat-transfer theory, semi-empirical expressions are set up for the transfer of heat from the combustion gases to the cylinder of an air-cooled engine and from the cylinder to the cooling air. Simple equations for the average head and barrel temperatures as functions of the important engine and cooling variables are obtained from these expressions. The expressions involve a few empirical constants, which may be readily determined from engine tests. Numerical values for … more
Date: 1938
Creator: Pinkel, Benjamin
Partner: UNT Libraries Government Documents Department
open access

Pressure Distribution Over an NACA 23012 Airfoil With an NACA 23012 External-Airfoil Flap

Description: Report presents the results of pressure-distribution tests of an NACA 23012 airfoil with an NACA 23012 external airfoil flap made in the 7 by 10-foot wind tunnel. The pressures were measured on the upper and lower surfaces at one chord section on both the main airfoil and on the flap for several different flap deflections and at several angles of attack. A test installation was used in which the airfoil was mounted horizontally in the wind tunnel between vertical end planes so that two-dimensio… more
Date: 1938
Creator: Wenzinger, Carl J.
Partner: UNT Libraries Government Documents Department
open access

A study of the torque equilibrium of an autogiro rotor

Description: From Summary: "Two improvements have been made in the method developed in NACA Reports nos. 487 and 591 for the estimation of the inflow velocity required to overcome a given decelerating torque in an autogiro rotor. At low tip-speed ratios, where the assumptions necessary for the analytical integrations of the earlier papers are valid, the expressions therein derived are greatly simplified by combining and eliminating terms with a view of minimizing the numerical computations required. At high… more
Date: January 10, 1938
Creator: Bailey, F. J., Jr.
Partner: UNT Libraries Government Documents Department
open access

Two-Dimensional Subsonic Compressible Flow Past Elliptic Cylinders

Description: "The method of Poggi is used to calculate, for perfect fluids, the effect of compressibility upon the flow on the surface of an elliptic cylinder at zero angle of attack and with no circulation. The result is expressed in a closed form and represents a rigorous determination of the velocity of the fluid at the surface of the obstacle insofar as the second approximation is concerned. Comparison is made with Hooker's treatment of the same problem according to the method of Janzen and Rayleight an… more
Date: February 11, 1938
Creator: Kaplan, Carl
Partner: UNT Libraries Government Documents Department
open access

On some reciprocal relations in the theory of nonstationary flows

Description: In the theory of nonstationary flows about airfoils, the "indicial lift" function ksub1(s) of Wagner and the "alternating lift" function c(k) of Theodorsen have fundamental significance. This paper reports on some interesting relations of the nature of Fourier transforms that exist between these functions. General problems in transient flows about airfoils may be given a unified broad treatment when these functions are employed. Certain approximate results also are reported which are of notable… more
Date: March 28, 1938
Creator: Garrick, I. E.
Partner: UNT Libraries Government Documents Department
open access

Airfoil section characteristics as applied to the prediction of air forces and their distribution on wings

Description: From Introduction: "The system presented herein yields, within the limitations of our present knowledge of aerodynamics, a general solution of the resultant wing forces and moments and their distribution. For the sake of completeness and facility in use, the report contains a table of the important section parameters for many commonly used sections and all other necessary data required to solve the most practical design problems coming within the scope of the system."
Date: 1938
Creator: Jacobs, Eastman N. & Rhode, R. V.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen