31 Matching Results

Search Results

Results: 1 - 24 next
open access

Ionic Equilibria and Anion Exchange of Uranyl Sulfate Solutions

Description: Theoretical investigation on the nature of ion exchange of acidified uranyl sulfate solutions with Dowex 21K, a strong base ion exchange resin.
Date: September 28, 1962
Creator: Stein, P. E.
Partner: UNT Libraries Government Documents Department
open access

Accidental Radiation Excursion at the Y-12 Plant, June 16, 1958: Final Report

Description: This report describes the circumstances leading to the accident, attempts to reconstruct the nuclear reactivity conditions, and reviews the dosimetric means and results which were used to help determine the exposure of affected employees.
Date: September 12, 1958
Creator: Patton, F. S.; Bailey, J. C.; Callihan, A. D.; Googin, J. M.; Jasny, G. R.; McAlduff, H. J. et al.
Partner: UNT Libraries Government Documents Department
open access

Uranium Concentration Meter

Description: From abstract; "Two basic instruments were developed for determining the concentration of uranium in solutions. Both instruments detect the gamma activity present in a sample solution, and interpret this analysis into direct presentation as parts per million."
Date: September 24, 1956
Creator: Arnett, Orville
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 1. Thermal & Mechanical Design

Description: This technical report represents the final design for a sodium to sodium intermediate heat exchanger and a sodium to water steam generator. The intermediate heat exchanger is designed for operation in a nuclear power plant using liquid sodium as the primary and secondary coolant. Since the primary fluid coming fro the reactor is radioactive, the purpose of the IHX is to transfer heat to a nonradioactive fluid which then goes to the steam generator. Because of radioactivity the unit will be encl… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 2. Chemical & Stress Analysis

Description: Introduction: This volume deals principally with the chemical analysis and the stress analysis for a sodium to sodium intermediate heat exchanger and a sodium to water steam generator. The work presented is an extension and modification of the analysis presented in the preliminary design report. The chemical analysis covers the sodium cover gas system and the effects of sodium-water reactions in the event of a leak in the steam generator. Considerable design work was done in an effort to mainta… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 3. Specifications

Description: Introduction: Sodium Components Material Specifications. Twenty-three material, inspection and welding specification are presented for the various parts of both the intermediate heat exchanger and steam generator. Tables indicate the applicable parts and assemblies to which these specifications shall apply. For other parts, where the material requirements are not severe, the ASTM or other indicated specifications shall apply.
Date: September 30, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 4. Operation & Maintenance

Description: This technical report contains the operation and maintenance specifications for the intermediate heat exchanger and the steam generator. The report contains eight sections: (1) General Information, (2) Shipping and Installation, (3) Operation Procedures, (4) Scram and Casualty Shutdowns, (5) Leaks, (6) Instrumentation and Control, (7) Maintenance, and (8) four Appendixes (a) Boiler Water Chemistry Recommendations, (b) Final Concept Drawings, (c) Industrial Nucleonics Literature on Liquid Level… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Hazards Evaluation of the SM-1 Penetrated Gasket

Description: Abstract: This technical report describes the as-constructed SM-1 penetrated gasket designed for SM-1 Core and Flow Instrumentation (Task XIV). This report supplements APAE No. 79, The Summary Hazards Report for Task XIV, and evaluates the effects of a postulated failure of this gasket. The effects of failure on the Maximum Credible Accident are determined and conclusions and recommendations for the use of this gasket are made.
Date: September 8, 1961
Creator: Coombe, J. R.; Gebhardt, F. G. & James, B.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for Insertion of the PM-1-M-2 Element in the SM-1 Core II

Description: Abstract: This technical report describes the Martin Co. PM-1-M-2 test element and analyzes the potential hazard incurred by its inclusion in the SM-1 Core II. A nuclear analysis develops power distributions and reactivity effects. Hydraulic and thermal analyses develop anticipated burnout heat flux ratios. An evaluation of the risk involved with the inclusion of this element is presented. In view of the narrow margin by which the PM-1-M-2 test element meets the minimum burnout ratios as def… more
Date: September 1, 1961
Creator: Coombe, J. R.; Scoles, J. F.; Brondel, J. O. & Lee, D. H.
Partner: UNT Libraries Government Documents Department
open access

Test Program for 30 Megawatt Prototype Sodium Intermediate Heat Exchanger and Steam Generator

Description: The designer's concept of a test program for the 30-Mw prototype intermediate heat exchanger and steam generator designed and fabricated as part of the Sodium Components Development Program is presented. The performance data will serve to verify the thermal design, or allow application of improved techniques to future designs, give an improved basis for stress analysis in design of future units, and demonstrate the capability and limitations of the units in relation to the performance specifica… more
Date: September 14, 1962
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Steady State and Transient Thermal and Hydraulic Analysis of SM-2 Termination Report

Description: Abstract: Thermal characteristics of the SM-2 core were analyzed at steady state and loss of flow conditions. For steady state operation, the steady state code STDY-3 was used. For transients during a loss of flow accident, ART-02, a one-dimensional code, was used. This analysis indicates the SM-2 core is safe from burnout under steady state operation at design power level (28 tMW) because (1) no nucleate boiling exists, and (2) the minimum burnout ratio is above 2.0. The core is safe from burn… more
Date: September 8, 1961
Creator: Segalman, I. & Bradley, P. L.
Partner: UNT Libraries Government Documents Department
open access

Design Criteria for Irradiated Vessels Task 6.0 Summary Report

Description: Abstract: This technical report presents design criteria to prevent the brittle fracture of ferritic reactor vessels that cold occur as a result of the rise in NDT caused by fast neutron irradiation. The criteria require that maximum principal stress in the vessel does not exceed 18 percent of yield stress at temperatures below NDT + 60 degree F. Under certain conditions the allowable stress may be based on the irradiated yield stress. A discussion of brittle fracture and an explanation of the … more
Date: September 29, 1961
Creator: McLaughlin, D. W.
Partner: UNT Libraries Government Documents Department
open access

Preliminary Hazards Summary Report for the ML-1 Nuclear Power Plant

Description: From abstract: "Neutronic characteristics, the control and instrumentation system, equipment description and plant safety considerations of the ML-1 (mobile, low power) nuclear power plant. The site is described with reference to geology, climate, and population density."
Date: September 30, 1959
Creator: Linenberger, G. A.
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division Annual Progress Report, May 31, 1968

Description: Report documenting the ongoing research of the Oak Ridge National Laboratory's Chemical Technology Division. This report includes tables, diagrams, graphs, and articles related to chemical technology.
Date: September 1968
Creator: Oak Ridge National Laboratory. Chemical Technology Division.
Partner: UNT Libraries Government Documents Department
open access

Description of Developmental Fast Neutron Breeder Power Reactor Plant

Description: Report that generally describes sodium cooled fast reactors, the features and facilities of such a reactor proposed by Atomic Power Development Associates, and then its safety and siting considerations.
Date: September 1, 1955
Creator: Atomic Power Development Associates
Partner: UNT Libraries Government Documents Department
open access

APPR-1 Research and Development Program. Design Analysis for Flow and Temperature Measurement Program, Task No. 5

Description: From objectives: "To establish, by literature search, analysis and design, the engineering and fabrication requirements for modifying reactor components and developing and installing the necessary instrumentation to carry out a fuel temperature and flow measurement experimental program."
Date: September 26, 1958
Creator: Richards, W. M. S.
Partner: UNT Libraries Government Documents Department
open access

Degassing Sparger Plate Screening Tests

Description: Results of tests to remove fission gases, xenon and krypton, formed during the operation of a nuclear reactor.
Date: September 1958
Creator: Starkweather, D. C.
Partner: UNT Libraries Government Documents Department
open access

Design, Fabrication, and Irradiation of Superheat Fuel Element SH-4B in VBWR

Description: From abstract: "The design, fabrication, and irradiation results are described for a 0.028 inch thick 304 stainless clad fuel element (SH-4B) exposed in the Vallecitos Boiling Water Reactor loop under superheat conditions."
Date: September 1, 1961
Creator: Spalaris, C. N.; Boyle, R. F.; Evans, T. F. & Esch, E. L.
Partner: UNT Libraries Government Documents Department
open access

Multi-Rod Burnout at High Pressure

Description: From abstract: "Thirty-two burnout points were obtained on an electrically heated assembly of 9 simulated fuel rods in a square channel."
Date: September 1962
Creator: Polomik, E. & Quinn, E. P.
Partner: UNT Libraries Government Documents Department
open access

Fast Ceramic Reactor Development Program: Experimental Studies of Sodium Logging in Fast Ceramic Reactor Fuels

Description: From abstract: "The experimental determination of the effects of sodium ingress on high-performance oxide fuels is described. Capsule design, fabrication, irradiation, examination, and analysis are described in detail."
Date: September 1963
Creator: O'Neill, G. L.; Novak, P. E.; Johnson, M. L. & Baily, W. E.
Partner: UNT Libraries Government Documents Department
open access

Flow-Regime Transitions at Elevated Pressures in Vertical Two-Phase Flow

Description: Two-phase flow-regime transitions at elevated pressures for a single-component, trichloromonofluoromethane, were investigated for forced-circulation, upward flow in a vertical, rectangular conduit with internal dimensions of 0.380 by 1.050 inches.
Date: September 1965
Creator: Baker, James L. L.
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division Annual Progress Report, May 31, 1961

Description: Report documenting the ongoing research and developments of the Chemical Technology Division of the Oak Ridge National Laboratory.
Date: September 21, 1961
Creator: Oak Ridge National Laboratory. Chemical Technology Division.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen