171 Matching Results

Search Results

Results: 1 - 24 next
open access

Rocket-Model Investigation to Determine the Hinge-Moment and Normal-Force Properties of a Full-Span, Constant-Chord, Partially Balanced Trailing-Edge Control on a 60 Degree Clipped Delta Wing Between Mach Numbers of 0.50 and 1.26

Description: Report presenting a free-flight investigation of a rocket-powered research model to determine the hinge-moment and normal-force characteristics of a trailing-edge control on a delta wing between Mach numbers of 0.50 and 1.26. The hinge-line location of 40 percent control chord satisfactorily reduced the high hinge moments associated with plain flap-type controls. Results regarding hinge moments and normal force are provided.
Date: October 30, 1953
Creator: Martz, C. William & Goslee, John W.
Partner: UNT Libraries Government Documents Department
open access

A pressure-distribution investigation of a fineness-ratio-12.2 parabolic body of revolution (NACA RM-10) at M = 1.59 and angles of attack up to 36 degrees

Description: Report presenting a pressure-distribution investigation of a parabolic body of revolution with a fineness ratio of 12.2, which was performed in the 4- by 4-foot supersonic tunnel at Mach number 1.59 and Reynolds number 3.6 x 10(sub 6), based on body length, for a range of angles of attack. Results regarding basic pressures, aerodynamic coefficients, asymmetrical pressures, comparison of experimental and theoretical pressures, artificial roughness, section coefficients, and body coefficients are… more
Date: October 30, 1952
Creator: Cooper, Morton; Gapcynski, John P. & Hasel, Lowell E.
Partner: UNT Libraries Government Documents Department
open access

Wing-load measurements at supersonic speeds of the Douglas D-558-II research airplane

Description: From Summary: "Flight measurements of the aerodynamic wing loads on the D-558-II airplane have been made in the Mach number range from 1.0 to 2.0. Nonlinear wing-panel characteristics occurred with variations in angle of attack. These nonlinear characteristics were apparent primarily at the lower supersonic speeds."
Date: March 30, 1955
Creator: Robinson, Glenn H.; Cothren, George E., Jr. & Pembo, Chris
Partner: UNT Libraries Government Documents Department
open access

Wing Pressure Distributions Over the Lift Range of the Convair XF92A Delta-Wing Airplane at Subsonic and Transonic Speeds

Description: Report presenting chordwise pressure distributions measured over the left wing of the Convair XF-92A delta-wing airplane to determine the effect of lift on the wing characteristics at subsonic and transonic Mach numbers. Results regarding the chordwise pressure distributions, wing-section aerodynamic characteristics, spanwise distributions, and elevon-section loads are provided.
Date: November 30, 1955
Creator: Keener, Earl R. & Jordan, Gareth H.
Partner: UNT Libraries Government Documents Department
open access

Removal of secondary-flow accumulations in a two-dimensional turbine nozzle passage by boundary-layer bleed

Description: Report presenting an investigation of boundary-layer bleed through a slot placed at the juncture of the suction surface and end wall to determine whether bleed in this manner could be used to prevent the local accumulation of boundary-layer fluids due to secondary flows. Results regarding the effect of bleed pressure, effect of bleed-slot height, and effect of slot length and position are provided.
Date: June 30, 1955
Creator: Wong, Robert Y.
Partner: UNT Libraries Government Documents Department
open access

Estimates of the Vertical-Tail Loads of a Bell P-63A-1 Airplane (AAF No. 42-68889) in Accelerated Rolling Maneuvers Based on Flight Tests With Two Vertical-Tail Arrangements

Description: Report discussing the results of using an enlarged vertical tail on a P-63A-1 on directional stability. The tests included measurements of the amount of sideslip at various speeds and normal accelerations. Potential required modifications for increased performance using the larger tail are also described.
Date: November 30, 1944
Creator: Johnson, Harold I.
Partner: UNT Libraries Government Documents Department
open access

Design considerations of a condensing system for vaporized magnesium

Description: The effect of the design characteristics of various condensing chambers on magnesium build-up at the chamber inlet was investigated. The condensing chambers are used in the vapor-condensation process for making magnesium slurries. A complete description of the various chamber designs and the procedure used in testing the chambers is given. The results are evaluated on the basis of clogging and total magnesium distilled per run. Orifice design was also considered.
Date: November 30, 1955
Creator: Witzke, Walter R.; Prok, George M. & Keller, Thomas A.
Partner: UNT Libraries Government Documents Department
open access

Generalized Indical Forces on Deforming Rectangular Wings in Supersonic Flight

Description: "A method is presented for determining the time-dependent flow over a rectangular wing moving with a supersonic forward speed and undergoing small vertical distortions expressible as polynomials involving spanwise and chordwise distances. The solution for the velocity potential is presented in a form analogous to that for steady supersonic flow having the familiar "reflected area" concept discovered by Evvard. Particular attention is paid to indicial-type motions and results are expressed in te… more
Date: June 30, 1954
Creator: Lomax, Harvard; Fuller, Franklyn B. & Sluder, Loma
Partner: UNT Libraries Government Documents Department
open access

Experimental investigation of free-convection heat transfer in vertical tube at large Grashof numbers

Description: Report presents the results of an investigation conducted to study free-convection heat transfer in a stationary vertical tube closed at the bottom. The walls of the tube were heated, and heated air in the tube was continuously replaced by fresh cool air at the top. The tube was designed to provide a gravitational field with Grashof numbers of a magnitude comparable with those generated by the centrifugal field in rotating-blade coolant passages (10(8) to 10(13)). Local heat-transfer coefficien… more
Date: June 30, 1952
Creator: Eckert, E. R. G. & Diaguila, A. J.
Partner: UNT Libraries Government Documents Department
open access

Comparison of performance of experimental and conventional cage designs and materials for 75-millimeter-bore cylindrical roller bearings at high speed

Description: From Summary: "The results of two investigations, one to determine the relative merits of four experimental and two conventional design 75-millimeter-bore (size 215) cylindrical roller bearings and one to determine the relative merits of nodular iron and bronze as cage materials for this size and type of bearing, are presented in this report. Nine test bearings were operated over a range of dn values (product of bearing bore in mm and shaft speed in r.p.m) from 0.3 x 10(6) to 2.3 x 20(6), radia… more
Date: June 30, 1954
Creator: Anderson, William J.; Macks, E. Fred & Nemeth, Zolton N.
Partner: UNT Libraries Government Documents Department
open access

Effects of Canopy, Revised Vertical Tail, and a Yaw-Damper Vane on the Aerodynamic Characteristics of a 1/16-Scale Model of the Douglas D-558-II Research Airplane at a Mach Number of 2.01

Description: Report discussing the aerodynamic characteristics in pitch and sideslip of a model of a Douglas D-558-II airplane with and without a yaw-damper vane at Mach number 2.01. A revised model was tested using a canopy and modified vertical tail. The revised configuration was found to have higher directional stability, trim lift coefficients, drag, and more positive effective dihedral than the original configuration.
Date: August 30, 1954
Creator: Robinson, Ross B.
Partner: UNT Libraries Government Documents Department
open access

Wing Pressure Distributions Over the Lift Range of the Convair XF-92A Delta-Wing Airplane at Subsonic and Transonic Speeds

Description: Report presenting chordwise pressure distributions measured over the left wing of the Convair XF-92A delta-wing airplane to determine the effect of lift on the wing characteristics at subsonic and transonic Mach numbers. Results regarding the chordwise pressure distributions, wing-section aerodynamic characteristics, spanwise distribution, and elevon-section loads are provided.
Date: November 30, 1955
Creator: Keener, Earl R. & Jordan, Gareth H.
Partner: UNT Libraries Government Documents Department
open access

Investigation of Drag and Static Longitudinal and Lateral Stability Characteristics of a 1/15-Scale Model of the Grumman F11F-1F Airplane at Mach Numbers of 1.56, 1.76, 2.06, and 2.53

Description: Report presenting an investigation in the Langley Unitary Plan wind tunnel to determine the drag and static longitudinal and lateral stability characteristics of a model of the Grumman F11F-1F airplane at Mach numbers 1.56, 1.76, 2.06, and 2.53. The investigation included the effects on performance and stability of modifications, including a wing-root leading-edge fillet and horizontal tails with negative dihedral of 10 degrees and 30 degrees. Information regarding net external minimum drag coe… more
Date: November 30, 1956
Creator: Turner, Kenneth L. & Fournier, Roger H.
Partner: UNT Libraries Government Documents Department
open access

A Wind-Tunnel Investigation of the Effects of Conical Camber for an Airplane Configuration Having a Triangular Wing of Aspect Ratio 2.2

Description: Memorandum presenting the results of an investigation directed at determining the effectiveness of various amounts and spanwise extents of conical camber on the aerodynamic characteristics of a wing-body-tail combination employing a triangular wing of aspect ratio 2.2. Five cambered wings were tested, all of which were designed for a Mach number of 1.0. Results regarding drag characteristics and lift and moment characteristics are provided.
Date: April 30, 1957
Creator: Phelps, E. Ray & Boyd, John W.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation at High Subsonic Speeds of the Effects on Static Stability Characteristics of Various Modifications to a Swept-Wing Fighter-Type Airplane Model

Description: Memorandum presenting an investigation at high subsonic speeds of a model of a twin-engine swept-wing fighter-type airplane. The model was tested with several different tail configurations and with several wing and engine inlet modifications. Results regarding pitching-moment characteristics, lift and drag characteristics, and lateral derivatives are provided.
Date: April 30, 1957
Creator: Goodson, Kenneth W.
Partner: UNT Libraries Government Documents Department
open access

Experimental and theoretical investigation of rotating-stall characteristics of single-stage axial-flow compressor with hub-tip ratio of 0.76

Description: Report presenting the overall performance and rotating stall characteristics of a single-stage compressor with a hub-tip ratio of 0.76 and a symmetrical velocity diagram over a wide range of weight flow for several different design speed percentages. No discontinuities in performance were noted at an operating condition. Results regarding the overall performance, types of rotating stall observed, circumferential extent of stall zones, flow fluctuations incited by rotating stall, rotating-stall … more
Date: November 30, 1953
Creator: Graham, Robert W. & Prian, Vasily D.
Partner: UNT Libraries Government Documents Department
open access

Tabulated pressure data for a series of controls on a 60 degree delta wing at Mach numbers of 1.61 and 2.01

Description: An investigation has been made at Mach numbers of 1.61 and 2.01 and Reynolds numbers from 1.7 X 10 to 7.6 X 10 to determine the pressure distributions over a 60 deg. delta wing having 20 different control configurations. Measurements were made at angles of attack from 0 deg to 15 deg for control deflections from -30 deg to 30 deg. This report presents the complete tabulated pressure data for the range of test conditions.
Date: March 30, 1956
Creator: Lord, Douglas R. & Czarnecki, K. R.
Partner: UNT Libraries Government Documents Department
open access

Experimental Investigation of a 0.4 Hub-Tip Diameter Ratio Axial-Flow Compressor Inlet Stage at Transonic Inlet Relative Mach Numbers 3: Effect of Tip Taper on Over-All and Blade-Element Performances

Description: Memorandum presenting an investigation conducted to determine the feasibility of increasing the tip-section blade-element efficiency of a transonic rotor by reducing the blade loading for a given design inlet relative Mach number. This report primarily discusses the overall and blade-element performances of the modified rotor and compares them with the performance of the original rotor.
Date: March 30, 1956
Creator: Montgomery, John C. & Glaser, Frederick
Partner: UNT Libraries Government Documents Department
open access

Altitude performance evaluation of J71-A-11 turbojet engine

Description: From Summary: "Data were obtained with five exhaust-nozzle areas and with the variable-area exhaust nozzle interlinked with the control system at conditions simulating flight at a Mach number of 0.8 and altitudes of 35,00 and 45,000 feet. Data simulating operation at zero flight Mach number at an altitude of 15,000 feet are also included. Engine component performance data are presented in addition to the overall engine performance."
Date: March 30, 1956
Creator: Useller, James W. & Pappas, George E.
Partner: UNT Libraries Government Documents Department
open access

Preliminary investigation of the effects of several seeker-nose configurations on the longitudinal characteristics of a canard-type missile at a Mach number of 1.60

Description: Report presenting an investigation to determine the effect of several seeker-nose configurations on the static longitudinal stability, canard control characteristics, and lift and drag at Mach number 1.60 of a canard-type ramjet missile with 70 degree delta canard control surfaces and 70 degree delta wings. The tests indicate that, for the most part, the configurations tested exhibited no significant difference in static longitudinal stability or horizontal-canard control effectiveness.
Date: October 30, 1953
Creator: Robins, A. Warner
Partner: UNT Libraries Government Documents Department
open access

Experimental Investigation at High Subsonic Speeds of the Rolling-Stability Derivatives of a 1/22 Scale Model of the Republic F-105 Airplane

Description: Report presenting an investigation of the rolling-stability derivatives for a model of the Republic F-105 airplane over a range of Mach numbers and angles of attack. The model retained damping in roll through the test ranges, but values of the damping varied considerably with angles of attack. Derivatives of yawing moment and lateral force due to rolling generally followed previously indicated trends.
Date: June 30, 1955
Creator: Sleeman, William C., Jr. & Hayes, William C., Jr.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of a 0.04956-Scale Model of the Convair F-102A Airplane at Mach Numbers of 1.41, 1.61, and 2.01

Description: "Tests have been made in the Langley 4- by 4-foot supersonic pressure tunnel at Mach numbers of 1.41, 1.61, and 2.01 of various arrangements of a 0.04956-scale model of the Convair F-102A airplane with faired inlets. Tests made of the model equipped with a plain wing, a wing with 6.4 percent conical camber, and a wing with 15 percent conical camber. Body modifications including an extended nose, a modified canopy, and extended afterbody fillets were evaluated" (p. 1).
Date: September 30, 1955
Creator: Spearman, M. Leroy & Driver, Cornelius
Partner: UNT Libraries Government Documents Department
open access

Investigation of the Static Stability Characteristics of Five Hypersonic Missile Configurations at Mach Numbers From 2.29 to 4.65

Description: Report presenting an investigation to determine the static stability characteristics of five hypersonic missile configurations. Testing was performed at a range of Mach and Reynolds numbers. Results regarding the effect of base block, longitudinal stability, directional stability, and Reynolds number effect are provided.
Date: June 30, 1958
Creator: Turner, Kenneth L. & Appich, W. H., Jr.
Partner: UNT Libraries Government Documents Department
open access

Flight Investigation at Low Angles of Attack to Determine the Longitudinal Stability and Control Characteristics of a Cruciform Canard Missile Configuration With a Low-Aspect-Ratio Wing and Blunt Nose at Mach Numbers From 1.2 to 2.1

Description: Report presenting flight testing of a rocket-powered model of a cruciform canard missile configuration with a low-aspect-ratio wing and blunt nose. Results regarding the lift coefficient, dynamic stability, static stability, control effectiveness, and drag are provided.
Date: September 30, 1957
Creator: Brown, Clarence A., Jr.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen