122 Matching Results

Search Results

Results: 1 - 24 next
open access

Corrosion of Stellite in MJ-1 Streams

Description: The following report provides data from completed tests for corrosion testing of stellite-T347 stainless steel test cylinders.
Date: March 8, 1950
Creator: Koenig, W. W.
Partner: UNT Libraries Government Documents Department
open access

The Ductility of Brazed Stainless Steel Joints

Description: Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1… more
Date: July 8, 1953
Creator: Saller, Henry A.; Stacy, J. T. & Eddy, N. S.
Partner: UNT Libraries Government Documents Department
open access

Neutron Emission by Polonium Oxide Layers

Description: The following report calculates how many neutrons are produced by the O-16([alpha]-n) reaction in a thin and uniform polonium oxide layer.
Date: August 8, 1944
Creator: Argo, M. & Teller, E.
Partner: UNT Libraries Government Documents Department
open access

Consolidation and shaping of boron ; summary of previous work

Description: From abstract: "The deposit on the rods is in the form of a brittle uneven tube which is cracked off and subsequently pulverized to a 200-mesh powder. This report is chiefly concerned with methods of consolidating this powder and shaping it into forms required, though it also discusses to some extent other methods of shaping boron or born-rich materials."
Date: October 8, 1945
Creator: Kamm, Robert L.
Partner: UNT Libraries Government Documents Department
open access

Methyl Methacrylate Casting Resin

Description: Abstract: "This report describes work done to improve the casting characteristics of methyl methacrylete resin under CMR-6-18 authorization. The experimental program was initiated with the objectives of decreasing casting time, bubble formation and shrinkage. It has been found that by use of a common solvent for monomer and polymer concentration in monomer can be attained greater than any previously reported in preparation of a methacrylate casting resign. Incorporation of this greater amount o… more
Date: January 8, 1948
Creator: Church, J. S. & Tyler, H. R.
Partner: UNT Libraries Government Documents Department
open access

The Boron-Carbon System: Quarterly Report Number 2, August - October 1960

Description: Abstract: A definitive investigation of the boron-carbon equilibrium system is being made by X-ray diffraction, metallographic, and thermal analytical techniques. Additional baron-carbon alloys have been prepared by sintering and arc-melting compacts prepared from boron and high-purity graphite. Metallographic examinations of these alloys are in agreement with alloys previously preapred from lampblack. X-ray investigation of sintered compacts indicates that the solubility range of boron carbide… more
Date: November 8, 1960
Creator: Elliott, Rodney P. & Van Thyne, R. J.
Partner: UNT Libraries Government Documents Department
open access

The Fabrication and Compatibility of Metallic Fuel Elements for High-Temperature Service

Description: From summary: "This report covers an experimental investigation into the fabrication of various potential fuel-element materials and the testing of these materials for compatibility with structural metals at 1090 C (2000 F)."
Date: October 8, 1951
Creator: Saller, Henry A. & Stacy, J. T.
Partner: UNT Libraries Government Documents Department
open access

Bibliography : Impact Testing of Materials

Description: The bibliography provided investigates the following sources: Chemical Abstracts 1947-1950., Metallurgical Abstracts Vols. 1-18., ASM Review of Metals Literature Vols. 1-6., J. Institute of Metals Vols. 78-80 (No. 7)., Physics Abstracts 1937-1950.
Date: June 8, 1952
Creator: Fick, Jean
Partner: UNT Libraries Government Documents Department
open access

Improved Zirconium Alloys : A Summary of Recent Work in This Field (Interim Report)

Description: Abstract: "As part of a program entitled "Improved Zirconium Alloys" a brief summary of a present zirconium research at various organizations has been prepared. Information was obtained by telephone and personnel contact; and these discussions, along with the organization and personnel, are presented."
Date: November 8, 1960
Creator: Weinstein, Daniel & Van Thyne, R. J.
Partner: UNT Libraries Government Documents Department
open access

Welded Closures for Fuel Elements

Description: From abstract: "The inert-gas metal-arc welding process was used to determine weldability studies of various aluminum alloys that are being considered for use as can materials. The solid-phase and induction welding processes were also investigated for making can closures."
Date: October 8, 1953
Creator: Sopher, R. P.; Martin, G. E.; Grable, G. B.; Voldrich, C. B.; Leatherman, A. F. & Todd, F. C.
Partner: UNT Libraries Government Documents Department
open access

Fused Salt Mixtures as Potential Liquid Fuels for Nuclear Power Reactors

Description: From introduction: "This report summarizes the work done on a study of fused-salt systems in a search for new liquid fuels suitable for use in a nuclear power reactor."
Date: September 8, 1953
Creator: Crooks, R. C.; Snyder, M. J. & Clegg, J. W.
Partner: UNT Libraries Government Documents Department
open access

Metallurgy Division Quarterly Progress Report for Period Ending October 31, 1950

Description: Technical report outlining the rate of production of modified MTR type fuel elements for the Bulk Shielding Facility has proceeded. Includes compatibility test that were started as a guide in the selection of materials suitable for fuel-element fabrication. [From Summary]
Date: February 8, 1951
Creator: Frye, J. H.; Miller, E. C. & Bridges, W. H.
Partner: UNT Libraries Government Documents Department
open access

Physics Division Quarterly Progress Report for Period Ending September 20, 1950

Description: Technical report covering experiments to measure the resonance and absorption of neutrons in U238 cylinders. Report also discusses control problems connected to the Bulk Shielding Facility and work on MTR controls.
Date: January 8, 1951
Creator: Sneil, A. H. & Wollan, E. O.
Partner: UNT Libraries Government Documents Department
open access

Age Calculations for Lattices with Aluminum-Matrix Slugs

Description: The process of age calculation for Hanford exponential lattices containing aluminum-matrix slugs, where the sums run over the materials of the lattice cell.
Date: June 8, 1954
Creator: Neumann, Herschel
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division Pilot Plant Section Report for November, 1950- January, 1951

Description: Technical report presenting a summary of the flowsheets, equipment, and progress for the Oak Ridge National Laboratory (ORNL) pilot plant development of the Purex Process and of the ORNL Metal Recovery Program. As of this report, conversion of the Purex pilot plant equipment in Buildings 3019 and 3503 is 90% complete. The building structure for the ORNL Waste Metal Recovery plant had been completed, and 15% of the process equipment had been installed. The first hot runs for this plant were sche… more
Date: March 8, 1951
Creator: Jackson, H. K.
Partner: UNT Libraries Government Documents Department
open access

Peeler Extraction of a Synchrocyclotron Beam

Description: This report follows the study of a perturbation in the fringing magnetic field of a synchrocyclotron, using the computed unperturbed orbits of the modified Berkeley 184-inch synchrocyclotron, and introduces the peeler extraction to overcome limitations by using a perturbation that recedes with increasing radial amplitude.
Date: August 8, 1957
Creator: Slobodrian, Rodolfo J.
Partner: UNT Libraries Government Documents Department
open access

A Proposed Particle Containment Device

Description: Abstract: A device is proposed for confining charged particles to a localized region of space by means of the alternating electric field of a resonant cavity. The motion of single electrons in the field is stable. The limitations to particle density and temperature are discussed, and found to be too severe to allow the device to serve as a reactor, although it might be a useful laboratory tool.
Date: July 8, 1953
Creator: Good, Myron L.
Partner: UNT Libraries Government Documents Department
open access

Beehive and Hornet : Reactor Codes for Spherical Geometry

Description: Abstract: Beehive is a five energy group, two region, time independent spherical reactor code. It considers the problem of reactor system in which the core material is assumed to be at a higher energy (temperature) than the reflector material. The code obtains a closed solution for the critical reactor assembly by a procedure which is a logical extension of normal two group theory. The companion code, Hornet, computes the neutron fluxes for the critical assembly determined by the Beehive calcul… more
Date: February 8, 1957
Creator: Stone, Stuart P.
Partner: UNT Libraries Government Documents Department
open access

Machine Calculations for the Analysis of the Plane Immobilized Plasma by Trajectories

Description: Abstract: "The analysis of an immobilized plasma by trajectories for the Cartesian case has been adapted to machine calculation and the results of such calculations are described. Their most surprising features is the thinness of the transition layer between a vacuum and a uniform plasma, which is possible without assuming too extreme physical circumstances."
Date: March 8, 1955
Creator: Tonks, Lewi, 1897-1971 & Keirstead, Ralph
Partner: UNT Libraries Government Documents Department
open access

Remotely Operated Irradiation Facility : (Sample Carrier)

Description: Report discussing a possible solution for providing a remotely operated way of handling samples at an irradiation facility. Explanation of operating requirements, equipment, and a possible layout is included.
Date: December 8, 1955
Creator: Fox, J. C.
Partner: UNT Libraries Government Documents Department
open access

Test of Water Quality by Impingement

Description: Report discussing an impinging experiment "to test the pitting tendencies of different qualities of water," specifically, alum coagulated water without sodium dichromate, alum coagulated water plus 2 ppm sodium dichromate, and ferrifloc coagulated water without sodium dichromate.
Date: January 8, 1953
Creator: Houck, William C.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen