10 Matching Results

Search Results

Results: 1 - 10
open access

Zinc and its alloys

Description: A report on zinc and its alloys.
Date: November 6, 1931
Partner: UNT Libraries Government Documents Department
open access

Zinc and Its Alloys

Description: Report issued by the Bureau of Standards discussing world production of zinc and zinc alloys. History, metallurgy, and structural properties of zinc are presented. This report includes tables, illustrations, and photographs.
Date: November 6, 1931
Creator: United States. Bureau of Standards.
Partner: UNT Libraries Government Documents Department
open access

Determination of the Profile Drag of an Airplane Wing in Flight at High Reynolds Numbers

Description: "Flight tests were made to determine the profile-drag coefficients of a portion of the original wing surface of an all-metal airplane and of a portion of the wing made aerodynamically smooth and more nearly fair than the original section. The wing section was approximately the NACA 2414.5. The tests were carried out over a range of airplane speeds giving a maximum Reynolds number of 15,000,000. Tests were also carried out to locate the point of transition from laminar to turbulent boundary laye… more
Date: January 6, 1939
Creator: Bicknell, Joseph
Partner: UNT Libraries Government Documents Department
open access

Air Flow in the Boundary Layer of an Elliptic Cylinder

Description: From Introduction: "The present investigation was carried out for the purpose of supplementing the earlier work with information on the boundary layer under such conditions of air speed and turbulence that transition occurs and the layer is partly laminar and partly turbulent. In the work reported in reference 1, the air speed was about 12 feet per second, and it was assumed that the boundary layer remained in the laminar condition until after separation because the separation point remained fi… more
Date: August 6, 1938
Creator: Schubauer, G. B.
Partner: UNT Libraries Government Documents Department
open access

The Compressibility Burble and the Effect of Compressibility on Pressures and Forces Acting on an Airfoil

Description: "Simultaneous air-flow photographs and pressure-distribution measurements were made of the NACA 4412 airfoil at high speeds to determine the physical nature of the compressibility burble. The tests were conducted in the NACA 24-inch high-speed wind tunnel. The flow photographs were obtained by the Schlieren method and the pressures were simultaneously measured for 54 stations in the 5-inch-chord airfoil by means of a multiple-tube manometer. Following the general program, a few measurements of … more
Date: July 6, 1938
Creator: Stack, John; Lindsey, W. F. & Littell, Robert E.
Partner: UNT Libraries Government Documents Department
open access

A photographic study of combustion and knock in a spark-ignition engine

Description: Report presents the results of a photographic study of the combustion in a spark-ignition engine using both Schlieren and flame photographs taken at high rates of speed. Although shock waves are present after knock occurs, there was no evidence of any type of sonic or supersonic compression waves existing in the combustion gases prior to the occurrence of knock. Artificially induced shock waves in the engine did not in themselves cause knock.
Date: December 6, 1937
Creator: Rothrock, A. M. & Spencer, R. C.
Partner: UNT Libraries Government Documents Department
open access

Force measurements on a 1/40-scale model of the U. S. Airship "Akron"

Description: This report describes a series of tests made on a 1/40-scale model of the U. S. Airship "Akron" (ZRS-4) for the purpose of determining the drag, lift, and pitching moments of the bare hull and of the hull equipped with two different sets of fins. Measurements were also made of the elevator forces and hinge moments.
Date: May 6, 1932
Creator: Freeman, Hugh B.
Partner: UNT Libraries Government Documents Department
open access

The Mechanism of Atomization Accompanying Solid Injection

Description: "A brief historical and descriptive account of solid injection is followed by a detailed review of the available theoretical and experimental data that seem to throw light on the mechanism of this form of atomization. It is concluded that this evidence indicates that (1) the atomization accompanying solid injection occurs at the surface of the liquid after it issues as a solid stream from the orifice; and (2) that such atomization has a mechanism physically identical with the atomization which … more
Date: January 6, 1932
Creator: Castleman, R. A., Jr.
Partner: UNT Libraries Government Documents Department
open access

Strength of Welded Joints in Tubular Members for Aircraft

Description: "The object of this investigation is to make available to the aircraft industry authoritative information on the strength, weight, and cost of a number of types of welded joints. This information will, also, assist the aeronautics branch in its work of licensing planes by providing data from which the strength of a given joint may be estimated. As very little material on the strength of aircraft welds has been published, it is believed that such tests made by a disinterested governmental labora… more
Date: February 6, 1930
Creator: Whittemore, H. L. & Brueggeman, W. C.
Partner: UNT Libraries Government Documents Department
open access

Hydraulics of Fuel-Injection Pumps for Compression-Ignition Engines

Description: "Formulas are derived for computing the instantaneous pressures delivered by a fuel pump. The first derivation considers the compressibility of the fuel and the second, the compressibility, elasticity, and inertia of the fuel. The second derivation follows that given by Sass; it is shown to be the more accurate of the two. Additional formulas are given for determining the resistance losses in the injection tube" (p. 621).
Date: March 6, 1931
Creator: Rothrock, A. M.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen