37 Matching Results

Search Results

Results: 1 - 24 next
open access

Geophysical Seismic Evaluation Study at Hanford

Description: From introduction: "In June, 1963, a geophysical research program was conducted at Hanford to determine the feasibility and desirability of using seismic methods in geohydrologic studies. Detection and delineation were desired of seven different geological features that in some sites affect the movement of liquid radioactive wastes discharged to the ground."
Date: December 1964
Creator: Brown, Ruth E. & Raymond, John R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Static Tests of Corrosion Inhibitors for Aluminum and Carbon Steel

Description: The experiments described in this report were performed for two purposes: (1) to find a chemical, or combination of chemicals, that would be effective for inhibiting corrosion of steel in static portions of the Hanford water systems, and (2) as screening tests to select candidate mixtures for further testing to replace sodium dichromate as the inhibitor of aluminum and steel corrosion in the Hanford single-pass reactor cooling water.
Date: February 1965
Creator: Richman, R. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

PRTR second generation shim assembly

Description: From introduction: "This document discusses the design, fabrication, assembly, and testing of a second generation shim rod assembly, and testing of a second generation shim rod assembly prototype for use in the Plutonium Recycle Test Reactor."
Date: November 1964
Creator: Rasmussen, D. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Ductility of Brazed Stainless Steel Joints

Description: Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1… more
Date: July 8, 1953
Creator: Saller, Henry A.; Stacy, J. T. & Eddy, N. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Extrusion Cladding of Fuel Element

Description: From introduction: "This investigation was undertaken with the general objective of determining whether uranium core could be sheathed with aluminum by an extrusion-cladding process. The ultimate objective of this work was to determine the feasibility of extrusion cladding flat plates of uranium."
Date: March 22, 1955
Creator: Slunder, C. J.; Fiorentino, R. J. & Hall, A. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Electroplated Metals on Uranium for Aluminum Cladding

Description: Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outg… more
Date: May 4, 1955
Creator: Beach, John G.; Schickner, William C.; Hopkinson, Dolores. & Faust, Charles L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Ceramic Investigations of UO₂

Description: This report covers the progress made on an intensive program to develop and evaluate UO2 as a possible fuel element for the PWR.
Date: June 16, 1955
Creator: Allison, Adrian G. & Duckworth, Winston H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Fabrication of Subassemblies for the Supercritical-Water Reactor

Description: In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.
Date: August 16, 1954
Creator: Keeler, J. R. & Hare, Alan W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effects of Chemical Impurities on the Quality of Rolled Uranium Rod

Description: Abstract: "Thirty-four uranium ingots containing controlled amounts of carbon, nitrogen, and Mgl2 slag were cast, rolled, and examined to investigate the relation between these impurities and the quality of the rolled rod. Carbon in concentrations up to 1400 ppm and nitrogen up to 170 ppm, either singly or in combination, had no significant effect on the number of defects observed in the rolled rod. The quality of the rods, however decreased with increasing amount of slag necessary to cause obs… more
Date: October 1, 1954
Creator: Saller, Henry A.; Keeler, J. R. & Cuddy, L. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Properties and Heat Treatment of Zirconium-Uranium Alloys

Description: From Abstract: "The heat treatment and mechanical properties of four zirconium alloys...were investigated. Tensile, hardness, Jominy end-quench, and metallographic data constitute the basis for much of the report. Other data reported include the results of high-temperature creep, tensile, hardness, cold rolling, thermal-cycling, and dynamic-modulus tests." A connection is made between the behavior of these four alloys and more alloys in the zirconium-uranium system.
Date: January 10, 1955
Creator: Chubb, Walston; Muehlenkamp, G. T. & Manning, G. K.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Study of Aluminum-Uranium Alloys

Description: Report discussing the redetermination of liquids for aluminum alloys containing 13 to 25 w/o uranium by metallographic examination, thermal analyses, and electrical resistance measurements. In addition, phase diagrams and a method for producing sound, homogeneous aluminum 16 w/o uranium alloy sleeve castings are presented.
Date: January 19, 1956
Creator: Saller, Henry A.; Dickerson, Ronald F.; Rough, Frank A.; Foster, Ellis L.; Bauer, Arthur A. & Lulay, John R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Solid-Phase-Reaction Studies of Control-Rod Materials

Description: Report discussing experiments on the interaction of neutron-absorber materials and metal matrix materials used in the fabrication of control rods, such as "boron, cadmium, and some of the rare-earth elements such as gadolinium and europium...In order to evaluate the reactions that might occur during fabrication and use, experiments were carried out in which combinations of the various control materials were heated in intimate contact with the several matrices at elevated temperatures."
Date: March 9, 1956
Creator: Gerds, Arnold F. & Mallett, Manley William, 1909-
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Thermal Distortion of SAR Hafnium Control Rod

Description: Abstract: The thermal distortion of a Y-shaped hafnium control rod heated by arrays of individually controlled radiation heaters was studied. The large axial and radial temperature gradients specified for this control rod were easily obtained with the radiation-heating method. The distortion, as measured with dial indicators, amounted to a 2-mil movement of the free end of the rod in the direction of the coolest blade.
Date: June 27, 1956
Creator: Goldthwaite, William H.; Allen, C. Malcolm & Fawcett, Sherwood L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Survey of Refractory Uranium Compounds

Description: Abstract: Chemical and physical data on twenty binary uranium compounds that may prove suitable for refractory nuclear fuels were assembled. The compounds were those with aluminum, boron, carbon, iron, nickel, nitrogen, silicon, or sulfur. Too little is known at this time about the compounds to evaluate any of them for fuel. The program is being extended in an effort to provide the needed data.
Date: August 7, 1956
Creator: Loch, Luther D.; Engle, Glen B.; Snyder, M. Jack & Duckworth, Winston Howard
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen