93 Matching Results

Search Results

prev Results: 49 - 72 next
open access

Army PWR Support and Development Program Six Months Summary Report : October 1, 1961 - March 31, 1962

Description: Abstract: Progress is reported on research and development tasks under the Program Plan for Engineering Support and Development of Army Pressurized Water Reactor Power Plants, Contract AT(30-1)-2639, during the six months' period October 1, 1061 to March 31, 1962.
Date: May 25, 1962
Creator: Dixon, M. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Residual and Fission Gas Release from Uranium Dioxide

Description: Abstract: Residual and fission gas release from UO2 were studied in the laboratory and in in-reactor experiments. Arc-fused powder and sintered pellets were used to determine the rate of evolution and types of residual gases as a function of temperature. Fission gas release was related to the average UO2 temperature and fission gas release calculations were made using the latest thermal conductivity values, isotopic half lives, and branching ratios available in the literature. The results obtai… more
Date: July 15, 1963
Creator: Spalaris, C. N. & Megerth, F. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Physics Design of the Mixed Spectrum Critical Assembly

Description: Summary: The Mixed Spectrum Superheater (MSSR) is an integral superheater reactor in which boiling occurs in an annular Boiling Water Reactor section and steam in superheated in an unmoderated fast section in the center. A Mixed Spectrum Critical Assembly (MSCA) to be operated at the Vallecitos Atomic Laboratory has been designed to mock up a 75-150 MWe prototype MSSR. The principal experimental measurements aimed at proving the feasibility of the MSSR concept include power distribution, Dopple… more
Date: August 1963
Creator: Reynolds, A. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High Power Density Development Project: Potter Meter Calibration and Instrumented Fuel Bundle Pressure Drop

Description: Summary: Technical report describing the testing of eight Potter Meters, for metering inlet flow and measuring exit steam qualities in the Consumers Big Rock Point Instrumented Fuel Assemblies, were individually calibrated for flow and pressure drop up to 500 gpm in the low temperature (130 F) fluid flow facility. The flow calibration comparison made with an ASME orifice installation, agreed to within + - 1 percent among seven of the meters, and meter Serial No. 8 was 2.8 percent lower than th… more
Date: July 26, 1963
Creator: Polomik, E. E. & Swan, C. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Quarterly Project Report: Sixteenth Quarter, May-July 1963

Description: From introduction: "This is the sixteenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."
Date: August 15, 1963
Creator: Flock, W. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Maritime Loop Irradiation Program for Savannah I Fuel Post-Irradiation Examination of SI5BM Fuel Assembly

Description: Abstract: A stainless steel clad 9-rod assembly fabricated by The Babcock & Wilcox Company was irradiated in a boiling water loop of the General Electric Test Reactor. A post-irradiation examination revealed no significant dimensional changes on the fuel rods. the results of mass spectrometric analysis made of the pelletized UO2 fuel indicated a maximum burnup of 11,500 MWD/tonne was attained by Rod B-4 during the exposure.An x-ray diffraction examination of an unirradiated fuel sample revealed… more
Date: November 7, 1963
Creator: Mathay, P. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fuel Failure Examinations and Analyses in the High Power Density Program

Description: Summary: The High Power Density Project includes a comprehensive fuel development program which has the objective of developing and demonstrating the performance of a nuclear reactor core having a high power density, long fuel life, and low fabrication cost. The fuel program is made up of two principal tasks. Task 1A consists of irradiation tests in the VBWR of Type 304 stainless steel clad, UO2 pellet type fuel rods fabricated by current commercial processes. Task 1B consists of the investigat… more
Date: September 16, 1963
Creator: Arlt, W. H. & Vandenberg, S. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Sixth Quarterly Progress Report, July 1-September 30, 1963

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the app… more
Date: October 15, 1963
Creator: Garelis, Edward & Meyer, P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High Power Density Development Project: Fourteenth Quarterly Progress Report, July-September 1963

Description: Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC. Five tasks are in progress: (1) Task 1A-High Power Density Fuel Development. The number of assemblies has been reduced to seven as a result of the failure of two pellet fuel assemblies. The average burnup of the group operating as of September 1 is 7500 MWD/T. (2) Task 1B-Fuel Fabrication Development. Assembly. Assembly 12S gave positiv… more
Date: October 1963
Creator: Holladay, R. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fuel Cycle Program Design and Fabrication of Special Assembly 10-L : Compacted Powder Fuel Rods Clad With 0.127-MM Wall Stainless Steel

Description: Technical report describing sixteen fuel rods clad with thin type 304 stainless steel and filled with vibratory compact powder UO2 that were fabricated and incorporated into a bundle for irradiation testing in the VBWR. The UO2 powders were tested for gas content. N2, CO, and H2 were the principal gases evolved by both type of UO2, but the arc-fused UO2 released about ten times as much gas as the Dyna Pak UO2. The amount of gas released was also a function of particle size and temperature. The… more
Date: October 1963
Creator: Ogawa, S. Y. & Williamson, N. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Prediction of Two-Phase Critical Flow Rate

Description: Technical report of a proposal of an analytical model to predict two-phase critical flow rate. The model is based upon thermal equilibrium, a "lumped" treatment of the two-phase velocity (each phase is represented by a single mean velocity), and upon the neglect of frictional and hydrostatic pressure losses. A comparison, of the proposed predictions with available test results and previous analyses shows that: (1) The present model agrees very well with the published test data. (2) In contrast … more
Date: October 1963
Creator: Levy, S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Design and Fabrication of Pellet Fuel Rods Clad With Thin Wall Stainless Steel

Description: Summary: Stainless steel clad nuclear fuel cycle costs can be reduced to those associated with Zircaloy clad fuel or potentially lower by reducing the thickness of the clad tube wall until performance penalties offset the savings associated with the reduction in parasitic neutron absorption. To demonstrate the feasibility and investigate performance capabilities of thin clad fuel rods for power reactor application an assembly was fabricated with 0.0127 cm (5 mil) thick stainless steel cladding … more
Date: February 1964
Creator: Hoffmann, J. P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Uranium Dioxide Fuel Rod Center Melting Test in the Vallecitos Boiling Water Reactor

Description: Technical report describing that as part of the AEC Fuel Cycle Program, tests are being conducted to evaluate the significance of current fuel design limitations that do not permit the maximum fuel temperature to exceed the melting point of UO2. The reliability of prediction of the fuel rod operating conditions that will cause melting of the UO2 was evaluated by means of a calibration test conducted in the Vallecitos Boiling Water Reactor. Conclusions: (a) The central portion of the 3.15-cm dia… more
Date: November 15, 1963
Creator: Williamson, H. E. & Hoffmann, J. P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Reactor Safety and Fuel Cycle Economics Considerations for Fast Reactors

Description: Abstract: A core design study of a 10 Mwe fast ceramic reactor is presented. Local reactivity coefficients, safety criteria, accident analyses, and economics are considered. An attempt is made to find a new balance of characteristics by purely geometric devices, i.e., by exploring the sodium : fuel ratio and varying the height : diameter ratio of the core. The use of BeO in the core was also investigated.
Date: November 11, 1963
Creator: Cohen, K. P.; Greebler, P.; McNelly, M. J.; Murphy, P. M.; Sherer, D. B. & Zebroski, E. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Quarterly Project Report: Seventeenth Quarter, August-October 1963

Description: From introduction: "This is the seventeenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."
Date: November 15, 1963
Creator: Flock, W. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Influence of the Doppler Effect on the Meltdown Accident

Description: The influence of the Doppler effect in the core disassembly process following a meltdown accident is examined with a Bethe-Tait type model in which the Doppler effect, as well as core disassembly, is considered in the reactor shutdown process. It is shown that a strong negative Doppler effect can radically reduce the explosive energy release in such an accident. (auth)
Date: November 18, 1963
Creator: Wolfe, B.; Friedman, N. & Riley, D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Heat Transfer to Superheated Steam

Description: Abstract: The physical property variation of superheated steam differs sufficiently from most other gases to warrant experimental investigation of heat transfer performance. Results are reported here of measurements made in a uniformly heated circular duct with steam at 1000 psi. The data agree very well with the expression use for design purposes, which is based on information in the literature for heating of other gases as well as steam. This work was a continuation of that performed under … more
Date: May 1963
Creator: Sutherland, W. A. (William Alan), 1931-
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Project. Internal Steam Separation Development of Radial Vane Steam Separators

Description: This technical report describes the development, design, operation, and performance of a full-circle, radial-vane steam separator for the boiling water section of a nuclear superheat reactor. Steam-water tests of this model have demonstrated that is has vane capacity in excess of that required for the 300-Mx(e) separate superheat reactor and for the 300-Mw mixed spectrum superheat reactor. It is proposed that the vane capacity requirement of the 600 Mw(e) separate superheat reactor may be atta… more
Date: May 31, 1963
Creator: Moen, R. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Maritime Loop Irradiation Program, S-I-5-B-M Fuel Irradiation Water Chemistry, Final Report

Description: Introduction: The purpose of this technical report is to review the water chemistry methods and equipment developed for use with the Maritime Loop Irradiation Program conducted in the General Electric Test Reactor (GETR) from December 2, 1960 to July 19, 1962. Special emphasis is given to areas having general application to other high purity water systems. The Appendix includes a discussion of specific conductivity and pH in high purity water systems. A major section of this report is devoted t… more
Date: August 1, 1963
Creator: Danielson, D. W.; Gilbert, R. S. & Panter, G. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Environmental Testing of a B4C-Ni Prototype Control Rod

Description: Summary: A prototype control rod containing absorber plates made from an electro- deposited dispersion of boron carbide in nickel was tested in the VBWR. It was exposed to the reactor environment of 545 degree F boiling water and thermal neutron fluxes (perturbed) which ranged from 0.6 to 1.1 x 10/sup 13/ nv for 2236 hours over a period of six months. The maximum B/sup 10/ burnup achieved during the test period was 1.8 percent. After irradiation, the rod was examined. The results of the examina… more
Date: October 15, 1963
Creator: Megerth, F. H. & Zimmerman, D. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Fifth Quarterly Progress Report, April 1-June 30, 1963

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the app… more
Date: July 15, 1963
Creator: Garelis, Edward & Meyer, P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Shielding Measurements at the SM-1 Reactor : June 1961

Description: Abstract: Neutron flux and gamma radiation measurements through the SM-1 primary shield were made at the startup of Core II in June 1961. They extend previous measurements (APAE-35) both vertically and horizontally in the primary shield and in the rod drive pit. Dose rate measurements on spent fuel elements under water are also reported.
Date: March 16, 1962
Creator: Moote, F. G. & Obrist, C. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

SM-1 Shielding Analyses

Description: Abstract: This technical report analyzes gamma dose rate and neutron measurements in their relation to the SM-1 shield design and is a continuation of previous shielding measurements and analyses reported in APAE-35 and APAE-35 Supplement 2. The data reported herein are spent fuel element and rod drive pit gamma dose rates. An analysis of gamma dose rates off the core midplane is presented and compared with test data.
Date: June 20, 1962
Creator: Stephenson, L. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen