38 Matching Results

Search Results

Results: 1 - 24 next
open access

In-Core Instrumentation Development Program Quarterly Progress Report June - September 1963

Description: Introduction: The objective of Project Agreement 22 is to determine the feasibility of covering the complete reactor neutron flux start range from 10(3) - 5 x 10(13) nv by using in-core chambers. The counting mode of operating will be used at low neutron fluxes and the root mean square voltage fluctuation mode will be used at high neutron flux levels. Experiments have been run utilizing various ion chambers, gases, gas pressures, voltage, and cables to measure sensitivities and range operating … more
Date: October 1963
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report September - December 1963

Description: Introduction: The objective of Project Agreement 22 is to determine the feasibility of using in-core ion chambers to cover the complete reactor neutron flux startup range from 10(4) -5 - 10(13) nv using in-core ion chambers. The counting mode of operation will be used at low neutron flux levels and the RMS voltage fluctuation mode (Campbell Theorem) will be used at high neutron flux levels. The June-September Progress Report (GEAP-4386) shows how the RMS voltage mode can be used, discusses c… more
Date: January 1964
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical, Fluid Flow, and Heat Transfer Out-Of-Pile Tests on EVESR MKI Prototype Fuel Bundle

Description: Summary: An EVESR MKI prototype fuel bundle was fully instrumented and operated intermittently for a 5-month period at the Pacific Gas and Electric Company’s Moss Landing Power Station. The vessel was operated up to 1000 psi with steam flows from 3000 to 26,600 lb/h, and steam inlet temperatures up to 825 degrees F. Data was recorded for blowout, vibration, flow distribution, heat transfer and pressure drop. The mechanical integrity of the fuel bundle, riser, and jumper system was satisfact… more
Date: February 1964
Creator: Polomik, E. E.; Fritz, J. R. & Ianni, P. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Quarterly Project Report: Eighteenth Quarter, November, 1963-January, 1964

Description: From introduction: "This is the eighteenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."
Date: February 15, 1964
Creator: Flock, W. L. & Imhoff, D. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Preoperational Power Stability Analysis of the Consumers Big Rock Point Plant

Description: Summary: An analytical study of the stability of the Big Rock Nuclear Reactor has been performed for the plant as built, and supplements a previous design stability study. The plant has been determined by this analysis to be very stable under every mode of operation anticipated during Phase I of the development program testing. Even under conservative assumptions of system parameters the minimum calculated gain and phase margins do not go below 13.0 db and 46 degrees, respectively. (Nor are … more
Date: February 1964
Creator: Case, J. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Two-Phase Pressure Losses Quarterly Progress Report: Eighth Quarter, November 12, 1963 - February 11, 1964

Description: Technical report describing that voids were measured in a ½-inch by 1-3/4-inch channel with the S-1 insert (B(0)/B(1) = 0.4, L(0) = 0.1 inch), at 2 inches ahead of the insert (position A), ½-inch past the insert (position B), 5 inches past (position C), and 12 inches past (position D). The conditions were: P – 1000 psia, G = 1.00 x 10(6) lb/h-ft(2), and x = 18.8 percent. Average void and void distribution at position A are the same as for flow in a straight channel. Void distribution at posi… more
Date: March 1, 1964
Creator: Janssen, E. (Engineer) & Kervinen, J. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High Power Density Development Project: Sixteenth Quarterly Progress Report, January-March 1964

Description: Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC. Five tasks are in progress: (1) Task 1A-High Power Density Fuel Development, (2) Task 1B-Fuel Fabrication Development. Assembly, (3) Task II-Stability, Heat Transfer and Fluid Flow, (4) Task III-Physics Development, and (5) Task IV-Co-Ordination and Test Planning.
Date: April 1, 1964
Creator: Holladay, R. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report January - March 1964

Description: The objective of Project Agreement 22 is to determine the feasibility of using in-core ion chambers to cover the complete reactor neutron flux startup range from 10(4) -5 - 10(13) nv using in-core ion chambers. This technical report discusses the following topics: low versus high cable termination impedance, amplifier considerations, noise considerations, gas and pressure selection, cable selection, effect of gamma, effect of temperature, and remaining problems.
Date: April 1964
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Accurate Nuclear Fuel Burnup Analyses; Eighth Quarterly Progress Report, (September - November 1963)

Description: The objective of the Accurate Nuclear Fuel Burnup Analyses program is to develop more accurate methods for burnup analysis for general use than the current method of analysis of Ca-137 or Sr-90. The program will require from three to five years of effort.
Date: December 1, 1963
Creator: Rider, B. F.; Ruiz, C. P.; Luke, P. S., Jr.; Peterson, J. P., Jr. & Smith, F. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Two-Phase Pressure Losses Quarterly Progress Report: Seventh Quarter, August 12, 1963 - November 11, 1963

Description: Technical report describing that the pressure drop along an annular channel with dimensions D(1) = 0.375 inch; D(2) = 0.875 inch, L = 70 inches. Flow was vertical and upward, and only the internal surface was heated. Subcooled conditions existed at the inlet, with two-phase conditions at the exit. Groups of three radial spacer pins on 18-inch centers along the channel, held the inner surface concentric with the outer surface. The single phase loss coefficient for each spacer group is K(8) = 0.2… more
Date: December 2, 1963
Creator: Janssen, E. (Engineer) & Kervinen, J. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

AEC Fuel Cycle Program Design and Fabrication of Special Assembly 9-L : Irradiation Performance Test of UO2-Cermet Fuel

Description: Technical report describing a UO2-Mo cermet fuel assembly fabricated for long-term irradiation performance testing in the Vallecitos Boiling water Reactor. The design and fabrication histories of this assembly are described and pre-irradiation data on each individual rod are presented. Molybdenum was added to improve the bulk thermal conductivity of the fuel, so that fuel temperatures would remain comparatively low during high-power level operation of the fuel element. The molybdenum was inc… more
Date: March 1964
Creator: Ogawa, S. Y.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Sodium Mass Transfer. [Part] XI. 1963 Test Run Reports (January - June)

Description: Technical report describing how corrosion data and exposure effects were obtained by subjecting metallic samples, during programmed test runs to flowing sodium in 6 test loops fabricated with various combinations of three selected materials, Type 316 stainless steel, 2 1/4 Cr-1 Mo alloy steel, and 5 Cr-1/2 Mo-1/2 Ti alloy steel. Information produced by each test run, including operational and metallurgical data and analyses, is presented. Data are shown in tables, graphs, and drawings.
Date: February 1964
Creator: Lockhart, R. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Accurate Nuclear Fuel Burnup Analyses; Ninth Quarterly Progress Report, (December 1963 - February 1964)

Description: The objective of the Accurate Nuclear Fuel Burnup Analyses program is to develop more accurate methods for burnup analysis for general use than the current method of analysis of Ca-137 or Sr-90. The program will require from three to five years of effort.
Date: March 1, 1964
Creator: Rider, B. F.; Peterson, J. P., Jr.; Ruiz, C. P. & Smith, F. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Seventh and Eighth Quarterly Progress Report, October 1, 1963-March 31, 1964

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. In the course of this program, a new theory was suggested and an experimental apparatus was designed and built. Experiments were carried out to test the new model. This present report contains additional data and information extracted from the experiments at PG&E Humboldt Bay Power Reactor at Eureka, California. During the las… more
Date: April 24, 1964
Creator: Garelis, Edward & Meyer, P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Residual and Fission Gas Release from Uranium Dioxide

Description: Abstract: Residual and fission gas release from UO2 were studied in the laboratory and in in-reactor experiments. Arc-fused powder and sintered pellets were used to determine the rate of evolution and types of residual gases as a function of temperature. Fission gas release was related to the average UO2 temperature and fission gas release calculations were made using the latest thermal conductivity values, isotopic half lives, and branching ratios available in the literature. The results obtai… more
Date: July 15, 1963
Creator: Spalaris, C. N. & Megerth, F. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Physics Design of the Mixed Spectrum Critical Assembly

Description: Summary: The Mixed Spectrum Superheater (MSSR) is an integral superheater reactor in which boiling occurs in an annular Boiling Water Reactor section and steam in superheated in an unmoderated fast section in the center. A Mixed Spectrum Critical Assembly (MSCA) to be operated at the Vallecitos Atomic Laboratory has been designed to mock up a 75-150 MWe prototype MSSR. The principal experimental measurements aimed at proving the feasibility of the MSSR concept include power distribution, Dopple… more
Date: August 1963
Creator: Reynolds, A. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High Power Density Development Project: Potter Meter Calibration and Instrumented Fuel Bundle Pressure Drop

Description: Summary: Technical report describing the testing of eight Potter Meters, for metering inlet flow and measuring exit steam qualities in the Consumers Big Rock Point Instrumented Fuel Assemblies, were individually calibrated for flow and pressure drop up to 500 gpm in the low temperature (130 F) fluid flow facility. The flow calibration comparison made with an ASME orifice installation, agreed to within + - 1 percent among seven of the meters, and meter Serial No. 8 was 2.8 percent lower than th… more
Date: July 26, 1963
Creator: Polomik, E. E. & Swan, C. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Quarterly Project Report: Sixteenth Quarter, May-July 1963

Description: From introduction: "This is the sixteenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."
Date: August 15, 1963
Creator: Flock, W. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Maritime Loop Irradiation Program for Savannah I Fuel Post-Irradiation Examination of SI5BM Fuel Assembly

Description: Abstract: A stainless steel clad 9-rod assembly fabricated by The Babcock & Wilcox Company was irradiated in a boiling water loop of the General Electric Test Reactor. A post-irradiation examination revealed no significant dimensional changes on the fuel rods. the results of mass spectrometric analysis made of the pelletized UO2 fuel indicated a maximum burnup of 11,500 MWD/tonne was attained by Rod B-4 during the exposure.An x-ray diffraction examination of an unirradiated fuel sample revealed… more
Date: November 7, 1963
Creator: Mathay, P. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fuel Failure Examinations and Analyses in the High Power Density Program

Description: Summary: The High Power Density Project includes a comprehensive fuel development program which has the objective of developing and demonstrating the performance of a nuclear reactor core having a high power density, long fuel life, and low fabrication cost. The fuel program is made up of two principal tasks. Task 1A consists of irradiation tests in the VBWR of Type 304 stainless steel clad, UO2 pellet type fuel rods fabricated by current commercial processes. Task 1B consists of the investigat… more
Date: September 16, 1963
Creator: Arlt, W. H. & Vandenberg, S. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Sixth Quarterly Progress Report, July 1-September 30, 1963

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the app… more
Date: October 15, 1963
Creator: Garelis, Edward & Meyer, P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High Power Density Development Project: Fourteenth Quarterly Progress Report, July-September 1963

Description: Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC. Five tasks are in progress: (1) Task 1A-High Power Density Fuel Development. The number of assemblies has been reduced to seven as a result of the failure of two pellet fuel assemblies. The average burnup of the group operating as of September 1 is 7500 MWD/T. (2) Task 1B-Fuel Fabrication Development. Assembly. Assembly 12S gave positiv… more
Date: October 1963
Creator: Holladay, R. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fuel Cycle Program Design and Fabrication of Special Assembly 10-L : Compacted Powder Fuel Rods Clad With 0.127-MM Wall Stainless Steel

Description: Technical report describing sixteen fuel rods clad with thin type 304 stainless steel and filled with vibratory compact powder UO2 that were fabricated and incorporated into a bundle for irradiation testing in the VBWR. The UO2 powders were tested for gas content. N2, CO, and H2 were the principal gases evolved by both type of UO2, but the arc-fused UO2 released about ten times as much gas as the Dyna Pak UO2. The amount of gas released was also a function of particle size and temperature. The… more
Date: October 1963
Creator: Ogawa, S. Y. & Williamson, N. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Prediction of Two-Phase Critical Flow Rate

Description: Technical report of a proposal of an analytical model to predict two-phase critical flow rate. The model is based upon thermal equilibrium, a "lumped" treatment of the two-phase velocity (each phase is represented by a single mean velocity), and upon the neglect of frictional and hydrostatic pressure losses. A comparison, of the proposed predictions with available test results and previous analyses shows that: (1) The present model agrees very well with the published test data. (2) In contrast … more
Date: October 1963
Creator: Levy, S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen