19 Matching Results

Search Results

Results: 1 - 19
open access

Influence of ordered L1₂ precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy

Description: This article focuses on Al0.7CoCrFeNi, a lamellar dual-phase (fcc + B2) precipitation-strengthenable eutectic high entropy alloy. The back-stresses from the coherent L12 precipitate were insufficient to cause improvement in twin nucleation, owing to elevated twinning stress under quasi-static testing. However, under dynamic testing high density of twins were observed.
Date: April 23, 2019
Creator: Gwalani, Bharat; Gangireddy, Sindhura; Zheng, Yufeng; Soni, V.; Mishra, Rajiv & Banerjee, Rajarshi
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Synthesis of uniform single layer tungsten disulfides for tunable photoluminescence

Description: This article explores single-layer tungsten disulfides (WS₂) because of their unique tunable bandgap. The authors report the scalable synthesis of uniform single-layer WS2 film by a two-step chemical vapor deposition (CVD) method followed by a laser thinning process.
Date: November 23, 2017
Creator: Park, Juhong; Kim, Min Su; Cha, Eunho; Kim, Jeongyong & Choi, Wonbong
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Corrosion Behavior of Selectively Laser Melted CoCrFeMnNi High Entropy Alloy

Description: The article focuses on a study that widens the toolbox to manufacture HEAs with exceptional corrosion resistance by additive manufacturing. CoCrFeMnNi high entropy alloys (HEAs) were additively manufactured (AM) by laser powder bed fusion and their corrosion resistance in 3.5 wt% NaCl solution was studied by potentiodynamic polarization and electrochemical impedance spectroscopy tests. A systematic study of AM CoCrFeMnNi HEAs’ porosity under a wide range of laser processing parameters was condu… more
Date: September 23, 2019
Creator: Ren, Jie; Mahajan, Chaitanya; Liu, Liang; Follette, David; Chen, Wen & Mukherjee, Sundeep
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Flexible and Stretchable Bioelectronics

Description: Article reviewing several several flexible and stretchable materials used as substrate, stretchable electrical conduits and encapsulation, design modifications for stretchability, fabrication techniques, methods of signal transmission and monitoring, and the power sources for these stretchable bioelectronics. Ultimately, these bioelectronic devices can be used for wide range of applications from skin bioelectronics and biosensing devices, to neural implants for diagnostic or therapeutic purpose… more
Date: February 23, 2022
Creator: Chitrakar, Chandani; Hedrick, Eric; Adegoke, Lauren & Ecker, Melanie
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Ordering-mediated local nano-clustering results in unusually large Hall-Petch strengthening coefficients in high entropy alloys

Description: This article reports a dramatic increase in the grain boundary strengthening or Hall-Petch coefficient, K, by systematically investigating the effect of Al addition on tensile yield strength in CoFeNi and CoCrFeNi high entropy alloys (HEAs) or complex concentrated alloys (CCAs). Such a trend is attributed to the ordering mediated nano-clustering in Al containing HEA/CCAs.
Date: January 23, 2021
Creator: Jagetia, Abhinav; Nartu, M. S. K. K. Y.; Dasari, S.; Sharma, A.; Gwalani, Bharat & Banerjee, Rajarshi
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

On Comparing the Similarity and Dissimilarity Between Two Distinct Vehicular Trajectories

Description: This article studies the problem of comparing the similarity and dissimilarity between two distinct vehicular trajectories by proposing an adjacency-based metric. This approach has a broad application in building truthfulness by comparing the similarity between two vehicles and evaluating the dissimilarity between two distinct paths in hazardous materials transportation.
Date: February 23, 2021
Creator: Qingge, Letu; Zhou, Peng; Dai, Lihui; Yang, Qing & Zhu, Binhai
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fundamentals of three-dimensional Yb-fiber Nd:YAG laser machining of structural bone

Description: This article presents a study that aims to understand the fundamental aspects of the laser-bone interaction in three-dimensional laser machining of the bone through an integrated experimental-computational approach.
Date: September 23, 2019
Creator: Dahotre, Narendra B.; Pantawane, Mangesh V.; Robertson, William B.; Khan, Riaz J. K. & Fick, Daniel P.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Dual-Wavelength Terahertz Metasurfaces with Independent Phase and Amplitude Control at Each Wavelength

Description: This article describes the design of a dual-wavelength achromatic metasurface-based deflector deflecting the incident wave to the same direction at two selected wavelengths, which has circumvented the critical limitation of strong wavelength dependence in the planar metasurface-based devices caused by the resonant nature of the plasmonic structures.
Date: September 23, 2016
Creator: Ding, Jun; Xu, Ningning; Ren, Han; Lin, Yuankun; Zhang, Weili & Zhang, Hualiang
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Effect of pressure quenching on the structures and properties of borosilicate glasses: Insights from molecular dynamics simulations

Description: Article describes how processes including hot compression, cold compression and subsequent annealing on the structures and properties are investigated and compared. They found that applying pressure up to 10 GPa at the glass transition temperature led to permanent densifications and a dramatic increase of elastic moduli by 90%, while thermal annealing reversed the increase and applying pressure at ambient temperature did not increase the modulus.
Date: August 23, 2022
Creator: Ren, Mengguo & Du, Jincheng
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Sodium Hydroxide-Free Soy Protein Isolate-Based Films Crosslinked by Pentaerythritol Glycidyl Ether

Description: This article examines the chemical structures of biodegradable films created out of soy protein isolate (SPI), sodium dodecylbenzenesulfonate (SDBS) and pentaerythritol glycidyl ether (PEGE). The thermal stabilities of the films were also examined by means of the thermo-gravimetric analysis.
Date: November 23, 2018
Creator: Wu, Yingji; Cai, Liping; Wang, Chen; Mei, Changtong & Shi, Sheldon
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Vibrations Evaluation of Functionally Graded Porous Beams in Thermal Surroundings by Generalized Differential Quadrature Method

Description: Article is a study investigating how to obtain the natural frequency of functionally graded porous beams simply supported on an elastic substrate in thermal surroundings by the theory of third-order shear deformation. This article is part of the special issue titled Dynamic Analysis and Vibration Control of Mechanical Structures Coupled with Rotational Systems.
Date: February 23, 2022
Creator: Khakpour, Mahdi; Bazargan-Lari, Yousef; Zahedinejad, Parham & Kazemzadeh-Parsi, Mohammad-Javad
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Light-Controlled Cell–Cell Assembly Using Photocaged Oligonucleotides

Description: Article asserts that while techniques that allow one to control the arrangement of cells and direct contact between different cell types have been developed that expand upon simple co-culture methods, specific control over heterojunctions that form between cells is not easily accomplished with current methods, such as 3D cell-printing. In this article, DNA-mediated cell interactions are combined with cell-compatible photolithographic approaches to control cell assembly.
Date: May 23, 2023
Creator: Mathis, Katelyn; Kohon, Agia Ibnat; Black, Stephen & Meckes, Brian
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Laser printed amorphous magnesium alloy: Microstructure, mechanical properties, and degradation behavior

Description: Article describes how, amorphous magnesium alloy, especially Mg-Zn-Ca series, has been receiving continuous attention in biomedical field, because of its favorable corrosion resistance, suitable modulus and biocompatibility. In this work, laser powder bed fusing with unique characteristics of rapid solidification and layer-by-layer fashion was used to fabricate bulk Mg-Zn-Ca and Mg-Zn-Ca-Y amorphous parts.
Date: November 23, 2023
Creator: Chen, Cheng; Li, Shaoyu; Ling, Chenrong; Yang, Youwen; Gao, Chengde; Li, Yageng et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen