Explore Results

open access

Comparison of Vee-Type and Conventional Tail Surfaces in Combination with Fuselage and Wing in the Variable-Density Tunnel

Description: "The pitching and the yawing moments of a vee-type and a conventional type of tail surface were measured. The tests were made in the presence of a fuselage and a wing-fuselage combination in such a way as to determine the moments contributed by the tail surfaces" (p. 1).
Date: July 1941
Creator: Greenberg, Harry
Partner: UNT Libraries Government Documents Department
open access

The Calculation of Span Load Distributions of Swept-Back Wings

Description: "Span load distributions of swept-back wings have been calculated. The method used was to replace the wing with a bound vortex at the quarter-chord line and to calculate the downwash due to the system of bound and trailing vortices to conform at the three-quarter-chord line to the slope of the flat-plate wing surface. Results are given for constant-chord and 5:1 tapered plan forms, for sweep-back angles of 0 degrees, 30 degrees, and 45 degrees, and for aspect ratios of 3, 6, and 9" (p. 1).
Date: December 1941
Creator: Mutterperl, William
Partner: UNT Libraries Government Documents Department
open access

Methods of Analyzing Wind-Tunnel Data for Dynamic Flight Conditions

Description: "The effects of power on the stability and the control characteristics of an airplane are discussed and methods of analysis are given for evaluating certain dynamic characteristics of the airplane that are not directly discernible from wind-tunnel tests alone. Data are presented to show how the characteristics of a model tested in a wind tunnel are affected by power. The response of an airplane to a rolling and a yawing disturbance is discussed, particularly in regard to changes in wing dihedra… more
Date: October 1941
Creator: Donlan, C. J. & Recant, I. G.
Partner: UNT Libraries Government Documents Department
open access

Some Recent Contributions to the Study of Transition and Turbulent Boundary Layers

Description: Report presenting a paper in two parts about transition and turbulent boundary layers. The first part reviews the current problem of the instability of laminar boundary layers. The second part reviews the current state of knowledge of the mechanics of turbulent boundary layers and of the methods now being used for fundamental studies of the turbulent fluctuations in turbulent boundary layers.
Date: April 1947
Creator: Dryden, Hugh L.
Partner: UNT Libraries Government Documents Department
open access

Considerations of the Total Drag of Supersonic Airfoil Sections

Description: The results of calculations of the viscous and pressure drags of some two-dimensional supersonic airfoils at zero lift are presented. The results indicate that inclusion of viscous drag alters many previous results regarding the desirability of certain airfoil shapes for securing low drags at supersonic speeds. At certain Reynolds and Mach numbers, for instance, a circular-arc airfoil may theoretically have less drag than the previously advocated symmetrical wedge-shape profile; although under … more
Date: July 1947
Creator: Ivey, H. Reese & Klunker, E. Bernard
Partner: UNT Libraries Government Documents Department
open access

Two-Dimensional Irrotational Transonic Flows of a Compressible Fluid

Description: The methods of NACA TN No. 995 have been slightly modified and extended in include flows with circulation by considering the alteration of the singularities of the incompressible solution due to the presence of the hypergeometric functions in the analytic continuation of the solution. It was found that for finite Mach numbers the only case in which the nature of the singularity can remain unchanged is for a ratio of specific heats equal to -1. From a study of two particular flows it seems that … more
Date: June 1948
Creator: Kuo, Yung-Huai
Partner: UNT Libraries Government Documents Department
open access

Tables and charts of flow parameters across oblique shocks

Description: Shock-wave equations have been evaluated for a range of Mach number in front of the shock from 1.05 to 4.0. Mach number behind the shock, pressure ratio, derivation of flow, and angle of shock are presented on charts. Values are also included for density ratio and change in entropy.
Date: August 1948
Creator: Neice, Mary M.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic heating and the deflection of drops by an obstacle in an air stream in relation to aircraft icing

Description: From Summary: "Two topics of interest to persons attempting to apply the heat method of preventing ice formation on aircraft are considered. Surfaces moving through air at high speed are shown, both theoretically and experimentally, to be subject to important aerodynamic heating effects that will materially reduce the heat required to prevent ice. Numerical calculations of the path of water drops in an air stream around a circular cylinder are given. From these calculations, information is obta… more
Date: October 1940
Creator: Kantrowitz, Arthur
Partner: UNT Libraries Government Documents Department
open access

Effects of Some Present-Day Airplane Design Trends on Requirements for Lateral Stability

Description: Note presenting computations made to determine the effects of some airplane design trends on the fin area and the dihedral angle required for lateral stability. The specific factors studied were wing loading, moments of inertia in roll and yaw, wing chord, and tail length. The results of the computations are presented in the form of diagrams of variations of fin area with dihedral angle for neutral stability.
Date: June 1941
Creator: Bamber, Millard J.
Partner: UNT Libraries Government Documents Department
open access

Spin Tests of Two Models of a Low-Wing Monoplane to Investigate Scale Effect in the Model Test Range

Description: Note presenting testing performed on scale models of a modern low-wing monoplane in the 15-foot free-spinning wind tunnel. Results are presented in the form of charts that afford a direct comparison between the spins of the two models for a number of different conditions. The results indicate that, within the range of Reynolds numbers used in the present investigation, such factors as difficulty of ballasting and testing are more important in determining proper model size than the changes in sc… more
Date: May 1941
Creator: Donlan, Charles J.
Partner: UNT Libraries Government Documents Department
open access

Investigations Relating to the Extension of Laminar Flow by Means of Boundary-Layer Suction Through Slots

Description: Note presenting experimental investigations of boundary-layer suction through slots as a means of increasing the extent of laminar flow on airfoil sections. The results show that, with the use of suitable slots, substantial increases in the extent of laminar flow can be achieved by boundary-layer control with only a small expenditure of power. Results regarding slot geometry and arrangement, suction slots in an unfavorable pressure gradient, suction slots in a favorable pressure gradient, and d… more
Date: October 1949
Creator: Loftin, Laurence K., Jr. & Burrows, Dale L.
Partner: UNT Libraries Government Documents Department
open access

Quantitative Study of Variations in Concentration of Glycerol and Aerosol OT on Foaming Volume of Oil at Room Temperature

Description: "The amount of foam that can be formed in the presence of certain pure chemical agents was investigated by a new method. The effect of variations in concentration and proportion of Aerosol OT and glycerol was studied and the effects of various other mixtures have been given for comparison. Both Gulf Agent and Aerosol-OT - glycerol mixtures, when present in comparable amounts, prohibited the formation of the normal volumes of foam to the same extent and in the optimum cases reduced it to only on… more
Date: April 1949
Creator: McBain, J. W. & Ross, Sydney
Partner: UNT Libraries Government Documents Department
open access

Effect of Various Compounds in Use With Airplane Engines Upon Foaming of Aircraft Lubricating Oil

Description: Report presenting an investigation of aircraft lubricating oil that is contaminated with various materials used in connection with airplane engines or contained in the fuel. Over 60 of the materials have been tested to determine their influence on the foaming of an aircraft lubricating oil. All but 13 of the compounds were found to have a small or negligible effect, but the other 13 were found to be strong foaming agents.
Date: April 1949
Creator: McBain, J. W. & Woods, W. W.
Partner: UNT Libraries Government Documents Department
open access

The Buckling of Parallel Simply Supported Tension and Compression Members Connected by Elastic Deflectional Springs

Description: Note presenting an investigation of the problem of the buckling of parallel simply supported tension and compression members connected by equally stiff and equally spaced elastic deflection springs as an approximation to the problem of the effect of finite stiffness of ribs and tension surface on the buckling load of the compression surface of a wing. Charts relating compressive buckling load, deflectional spring stiffness, and the ratio of the flexural stiffness of the members are given for te… more
Date: February 1949
Creator: Seide, Paul & Eppler, John F.
Partner: UNT Libraries Government Documents Department
open access

A Generalized Theoretical Investigation of the Hydrodynamic Pitching Moments Experienced by V-Bottom Seaplanes During Step-Landing Impacts and Comparisons With Experiment

Description: Note presenting a theoretical investigation made of the hydrodynamic pitching moments experienced by V-bottom seaplanes during step-landing impacts. The entire immersion process is analyzed from the instant of initial contact until the seaplane rebounds from the water surface.
Date: June 1948
Creator: Milwitzky, Benjamin
Partner: UNT Libraries Government Documents Department
open access

A flight investigation to increase the safety of a light airplane

Description: Report presenting information about a series of modifications incorporated into light airplanes to increase safety, including decreasing the wing incidence, increasing the wing washout, increasing the area and aspect ratio of the horizontal and vertical tails, moving the elevators out of propeller slipstreams, depressing the thrust axis, and limiting the rudder travel. The new inherent safety characteristics and effects on the airplane's performance are provided.
Date: March 1947
Creator: Hunter, P. A. & Vensel, J. R.
Partner: UNT Libraries Government Documents Department
open access

Compressive Buckling of Simply Supported Plates With Longitudinal Stiffeners

Description: "Charts are presented for the analysis of the stability under compression of simply supported rectangular plates with one, two, three, and an infinite number of identical equally spaced longitudinal stiffeners that have zero torsional stiffness" (p. 1).
Date: March 1949
Creator: Seide, Paul & Stein, Manuel
Partner: UNT Libraries Government Documents Department
open access

A General Method of Selecting Foam Inhibitors

Description: Note presenting a criterion for selecting foam inhibitors from insoluble liquids that form emulsions with the foaming liquid. By determining the surface tensions of the foaming liquid and of the additive saturated with that liquid and the interfacial tension between them, spreading and entering coefficients may be calculated. A mechanism of foam inhibition is also described.
Date: May 1946
Creator: Robinson, J. V. & Woods, W. W.
Partner: UNT Libraries Government Documents Department
open access

Effect of Centrifugal Force on the Elastic Curve of a Vibrating Cantilever Beam

Description: Report presenting the results of a study to determine the effect of rotation on the dynamic-stress distribution in vibrating cantilever beams. Both theoretical and experimental results are obtained by means of stroboscopic photographs and strain gauges. Both types of results indicated that the introduction of centrifugal force had no effect on the maximum dynamic-stress locations in a vibrating cantilever beam fixed at the center of rotation within the investigated speed range.
Date: February 1947
Creator: Simpkinson, Scott H.; Eatherton, Laurel J. & Millenson, Morton B.
Partner: UNT Libraries Government Documents Department
open access

Linear theory of boundary effects in open wind tunnels with finite jet lengths

Description: Report in two parts: one examines the boundary conditions for an open wind tunnel with special references to the effects of the closed entrance and exit sections, while the other derives solutions of four types of two-dimensional open tunnels, including one in which the pressures on the two free surfaces are not equal.
Date: March 1949
Creator: Katzoff, Samuel; Gardner, Clifford S.; Diesendruck, Leo & Eisenstadt, Bertram J.
Partner: UNT Libraries Government Documents Department
open access

Boundary-Induced Upwash for Yawed and Swept-Back Wings in Closed Circular Wind Tunnels

Description: Report presenting a determination of the tunnel-induced velocities for yawed and swept-back airfoils in a closed circular wind tunnel. Calculations were performed for elemental horseshoe vortices with one tip of the bound vortex on the tunnel axis for a range of yaw angles and bound-vortex lengths.
Date: May 1947
Creator: Eisenstadt, Bertram J.
Partner: UNT Libraries Government Documents Department
open access

Matrix Methods for Calculating Cantilever-Beam Deflections

Description: Note presenting the method of numerical integration for calculation of beam deflection in matrix form to give it the advantages which are inherent in an influence-coefficient method. Examples are presented to show that the use of weighted matrices reduces the calculation time required to obtain a desired degree of accuracy.
Date: March 1949
Creator: Benscoter, Stanley U. & Gossard, Myron L.
Partner: UNT Libraries Government Documents Department
open access

Data on Optimum Length, Shear Strength, and Tensile Strength of Age-Hardened 17S-T Machine-Countersunk Rivets in 75S-T Sheet

Description: Report presenting a series of tensile-strength and shear-strength tests made on age-hardened 17S-T rivets machine-countersunk in 75S-T sheets. The results of the tests indicated that the joints can be made satisfactorily with regard to both flushness and strength if the ratio of buck to diameter is kept to a certain value.
Date: March 1947
Creator: Schuette, Evan H. & Niles, Donald E.
Partner: UNT Libraries Government Documents Department
open access

Flight Measurements of Helicopter Blade Motion With a Comparison Between Theoretical and Experimental Results

Description: Note presenting photographic records of the behavior of a blade in flight as obtained with a conventional single-rotor helicopter. The results of the measurements of flapping motion, in-plane motion, and blade distortions are presented for selected conditions of flight at tip-speed ratios ranging from 0.12 to 0.25. Plots of blade twisting and blade bending in the plane of flapping are presented for a sample case.
Date: April 1947
Creator: Myers, Garry C., Jr.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen