Explore Results

open access

Applications of induction linac technology to heavy ion fusion

Description: Evaluation of the application of heavy ion accelerators to ignite d-t pellets in a thermonuclear reactor is discussed. Accelerator design requirements considered include transport-limited current, beam injection conditions, and pulse bunching and focusing characteristics. The desirability of resonant and non-resonant accelerating structures is comparatively examined. The required power system switch tubes are discussed. It is concluded that heavy ion accelerators could offer a promising solutio… more
Date: July 1, 1977
Creator: Faltens, A. & Keefe, D.
Partner: UNT Libraries Government Documents Department
open access

Solar-thermal energy conversion and storage: cyclohexane dehydrogenation. Progress report, 30 September 1977-30 June 1978

Description: The objective of this project is to provide research support for the benzene/cyclohexane heat pipe development program at Sandia. The kinetics of the cyclohexane decomposition (energy collection) reaction over a commercially available naphtha reforming catalyst (RD-150, Englehard Industries) in the temperature range 400 to 800/sup 0/F and pressures of 1 to 40 atmospheres were measured. Significant amounts of side products such as toluene and butane were identified at temperatures above 550/sup … more
Date: July 1, 1978
Creator: Ritter, A.B.; DeLancey, G.B.; Schneider, J. & Silla, H.
Partner: UNT Libraries Government Documents Department
open access

Scoping Report on Various Salt Mines in the United States

Description: One of the most important factors in isolating the demonstration waste storage site is an adequate number of shafts to insure proper ventilation. Proper ventilation will require that the air exhausted from the storage area pass directly to the upcast air shaft. Those mines reported by this scoping contract generally conform with the two shafts per mine requirement of MESA. Three of the mines reported on have more than two shafts. Several of the mines can have additional shafts drilled in time t… more
Date: July 1977
Creator: Jacoby, C. H.
Partner: UNT Libraries Government Documents Department
open access

Industrial Fuel Gas Demonstration Plant Program. Monthly and quarterly progress report, 1 April 1978-30 June 1978 (Deliverable No. 12)

Description: The design of the commercial plant was completed and a cost estimate prepared. Most work remaining on Task I relates to: Demonstration Plant recommendations and includes a configuration study, at DOE's request, to evaluate alternatives for the Demo Plant Configuration to achieve the required reliability. The specific alternatives being considered are: A base U-Gas Plant designed to produce 50 MMM Btu/day 365 days per year (the High Reliability case); a base U-Gas Plant plus product storage… more
Date: July 1, 1978
Partner: UNT Libraries Government Documents Department
open access

Pacific Northwest Laboratory Report on Fusion Energy Research, April 1977 - June 1977

Description: The development of economic data for fusion power plants continued in a study estimating the potential impact of a shortage of materials important in fusion plant construction. In studies developing heat transfer and fluid flow design tools for fusion reactor blankets, preconceptual design studies were initiated to identify the potential design limits of water cooling in the first wall of Tokamak Next Step (TNS) concepts. In surface effects research clean gold samples were irradiated in the Uni… more
Date: July 1, 1977
Partner: UNT Libraries Government Documents Department
open access

Study on reduction of accessory horsepower requirements. Eighth quarterly progress report

Description: This is the eighth quarterly technical progress report for a program in which the objective is to evolve and define an accessory drive system that will minimize system power consumption of driven accessories on an internal combustion engine in a passenger automobile. The initial program phases established concept feasibility, determined potential fuel savings, and selected a drive system design for concept mechanization. The current Phase IV carries the program through prototype fabrication and… more
Date: July 31, 1976
Partner: UNT Libraries Government Documents Department
open access

Technical-economic assessment of the production of methanol from biomass. Executive summary. Final research report

Description: The results are presented of a comprehensive systems study which assessed the engineering and economic feasibilities of the production of methanol from biomass utilizing existing technology. The three major components of the biomass to methanol system assessed are the availability of biomass feedstocks, the thermochemical conversion of biomass to methanol fuels, and the distribution and markets for methanol fuels. The results of this study show that methanol fuel can be produced from biomass us… more
Date: July 12, 1979
Creator: Wan, E. I.; Simmons, J. A.; Price, J. D. & Nguyen, T. D.
Partner: UNT Libraries Government Documents Department
open access

Transport of solid commodities via freight pipeline: demand analysis methodology. Volume IV. First year final report

Description: In order to determine the feasibility of intercity freight pipelines, it was necessary to determine whether sufficient traffic flows currently exist between various origins and destinations to justify consideration of a mode whose operating characteristics became competitive under conditions of high-traffic volume. An intercity origin/destination freight-flow matrix was developed for a large range of commodities from published sources. A high-freight traffic-density corridor between Chicago and… more
Date: July 1, 1976
Creator: Allen, W.B. & Plaut, T.
Partner: UNT Libraries Government Documents Department
open access

Preliminary report on the promise of accelerator-driven natural-uranium-fueled light-water-moderated breeding power reactors

Description: A new concept for a power breeder reactor that consists of an accelerator-driven subcritical thermal fission system is proposed. In this system an accelerator provides a high-energy proton beam which interacts with a heavy-element target to produce, via spallation reactions, an intense source of neutrons. This source then drives a natural-uranium-fueled, light-water-moderated and -cooled subcritical blanket which both breeds new fuel and generates heat that can be converted to electrical power.… more
Date: July 1, 1977
Creator: Greenspan, E.
Partner: UNT Libraries Government Documents Department
open access

Input and decayed values of radioactive liquid wastes discharged to the ground in the 200 Areas through 1975

Description: Low and intermediate level liquid wastes from chemical separations processing of spent reactor fuel elements have been discharged to the ground in the 200-Areas since 1944. Large volumes of process cooling water, normally free of radioactive contaminants, are discharged to surface ditches or natural surface depressions (ponds). Lesser volumes of liquid waste such as steam condensates, process condensates, scavenged process waste supernatants, and plutonium processing wastes have been, or are be… more
Date: July 8, 1976
Creator: Anderson, J. D.
Partner: UNT Libraries Government Documents Department
open access

Crop residues as a fuel for power generation

Description: Crop residues could serve as an alternative energy source for producing electric power and heat in agricultural regions of the United States. Nearly 2 quads of residues are estimated to be available as a sustainable annual yield. These can substitute for up to one quad of conventional fuels used to generate electricity and up to an additional quad of petroleum and natural gas currently used for producing heat. The most promising routes to residue conversion appear to be regional generators size… more
Date: July 1, 1979
Creator: Bhagat, N.; Davitian, H. & Pouder, R.
Partner: UNT Libraries Government Documents Department
open access

Turbulent interchange in triangular array bare rod bundles

Description: Bulk mixing coefficients were measured for single plane water flow in a simulated rod bundle with a pitch to diameter ratio of 1.10. A tracer technique employing Rhodamine B as the tracer and measuring fluorescence was used. Isokinetic sampling was achieved by using a pressure balance method. The results were corrected for both entrance effects and diversion crossflows. The results showed a change in Reynolds number behavior as the laminar sublayer began to ''choke'' the turbulent mixing. This,… more
Date: July 1, 1977
Creator: Kelly, J.M. & Todreas, N.
Partner: UNT Libraries Government Documents Department
open access

Flash hydropyrolysis of coal. Quarterly report No. 2, April 1--June 30, 1977

Description: With the combination of low hydrogen to coal ratio, high coal feed rate and larger total quantity of coal fed, considerable liquid product is being condensed and collected. Experimental runs conducted at 750/sup 0/C and 800/sup 0/C at pressures up to 3000 psi of hydrogen show overall hydrocarbon yields and particularly gaseous hydrocarbon yields to increase with pressure to approximately 60 percent at 3000 psi. At 750/sup 0/C approximately one third (20 percent) of this yield is in the form of … more
Date: July 1, 1977
Creator: Fallon, P
Partner: UNT Libraries Government Documents Department
open access

National hydroelectric power resources study. Preliminary inventory of hydropower resources. Volume 6. Northeast region

Description: In the Northeast region, the physical potential for all sites exceeds 33,000 MW of capacity with an estimated average annual energy of some 153,000 GWH. By comparison, the available data represent about 6% of the total capacity and 11% of the hydroelectric energy potential estimated for the entire US. Of the total capacity estimated for the region, 6100 MW has been installed. The remainder (27,200 MW, excluding the undeveloped capacity in the New England States) is the maximum which could be de… more
Date: July 1, 1979
Partner: UNT Libraries Government Documents Department
open access

Automation of the National Water Quality Laboratories, U. S. Geological Survey. I. Description of laboratory functions and definition of the automation project

Description: In January 1976, the Water Resources Division of the U.S. Geological Survey asked Lawrence Livermore Laboratory to conduct a feasibility study for automation of the National Water Quality (NWQ) Laboratory in Denver, Colorado (formerly Denver Central Laboratory). Results of the study were published in the Feasibility Study for Automation of the Central Laboratories, Lawrence Livermore Laboratory, Rept. UCRL-52001 (1976). Because the present system for processing water samples was found inadequat… more
Date: July 1, 1977
Creator: Morris, W.F. & Ames, H.S.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen