UNT Libraries Government Documents Department - 12 Matching Results

Search Results

Results: 1 - 12
open access

Analysis of Zero Power Experiments on SM-1 Core II and SM-1A Core I

Description: Abstract: An analysis of SM-1 Core II and SM-1A Core I zero power experiments was made by comparing these cores to each other and to AM-1 Core I on the basis of critical bank positions, bank calibrations and available chemical analyses of the fuel plate compositions. The effects of replacing boron absorbers by europium absorbers upon rod worth and stuck rod conditions were studied. Comparisons of measured and calculated power distributions were made. It was concluded that both SM-1 Core II an… more
Date: October 5, 1960
Creator: Paluszkiewicz, S.
Item Type: Refine your search to only Report
open access

Criteria for Evaluating Hazards Involved in Proposed Tests On and/or Modifications To the SM-1

Description: Abstract: This technical report elucidates principles of hazards evaluation. The concept of hazards potential is introduced and utilized to show how a reactor system perturbation will influence its nuclear safety. Literature relating to reactor safety is referenced to provide the sources of information required for hazards analysis and show how they influence a hazards evaluation. A checklist of items which should be considered in evaluating a change, test, or modification is presented.
Date: October 18, 1961
Creator: Scoles, J. F.
Item Type: Refine your search to only Report
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Sixth Quarterly Progress Report, July 1-September 30, 1963

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the app… more
Date: October 15, 1963
Creator: Garelis, Edward & Meyer, P.
Item Type: Refine your search to only Report
open access

Environmental Testing of a B4C-Ni Prototype Control Rod

Description: Summary: A prototype control rod containing absorber plates made from an electro- deposited dispersion of boron carbide in nickel was tested in the VBWR. It was exposed to the reactor environment of 545 degree F boiling water and thermal neutron fluxes (perturbed) which ranged from 0.6 to 1.1 x 10/sup 13/ nv for 2236 hours over a period of six months. The maximum B/sup 10/ burnup achieved during the test period was 1.8 percent. After irradiation, the rod was examined. The results of the examina… more
Date: October 15, 1963
Creator: Megerth, F. H. & Zimmerman, D. L.
Item Type: Refine your search to only Report
open access

Fuel Cycle Program Design and Fabrication of Special Assembly 10-L : Compacted Powder Fuel Rods Clad With 0.127-MM Wall Stainless Steel

Description: Technical report describing sixteen fuel rods clad with thin type 304 stainless steel and filled with vibratory compact powder UO2 that were fabricated and incorporated into a bundle for irradiation testing in the VBWR. The UO2 powders were tested for gas content. N2, CO, and H2 were the principal gases evolved by both type of UO2, but the arc-fused UO2 released about ten times as much gas as the Dyna Pak UO2. The amount of gas released was also a function of particle size and temperature. The… more
Date: October 1963
Creator: Ogawa, S. Y. & Williamson, N. E.
Item Type: Refine your search to only Report
open access

Hazards Report for SM-1 Core II With the SM-1 Core II High Burnup Elements Replaced with SM-1 Core I Spare Elements

Description: Abstract: The removal of both SM-1 Core I high burnup elements from the SM-1 Core II and the insertion of two SM-1 Core I spare elements i their places are discussed. Nuclear and thermal characteristics of Core II with the change are presented and conclusion related to the change in hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself leads to a more conservative… more
Date: October 9, 1961
Creator: Coombe, J. R.; Lee, D. H. & Matthews, F. T.
Item Type: Refine your search to only Report
open access

Hazards Report for SM-1 Core II Without the SM-1 Core I High Burnup Elements and With the PM-1-M-2 Element

Description: Abstract: The removal of both SM-1 Core I high burnup elements from SM-1 Core II and the insertion of the PM-1-M-2 element and the SM-1 Core I spare element in SM-1 Core II is discussed. Nuclear and thermal characteristics of Core II with these changes are presented and conclusions related to the changes in the hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself… more
Date: October 7, 1961
Creator: Coombe, J. R.; Lee, D. H. & Mathews, F. T.
Item Type: Refine your search to only Report
open access

High Power Density Development Project: Fourteenth Quarterly Progress Report, July-September 1963

Description: Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC. Five tasks are in progress: (1) Task 1A-High Power Density Fuel Development. The number of assemblies has been reduced to seven as a result of the failure of two pellet fuel assemblies. The average burnup of the group operating as of September 1 is 7500 MWD/T. (2) Task 1B-Fuel Fabrication Development. Assembly. Assembly 12S gave positiv… more
Date: October 1963
Creator: Holladay, R. L.
Item Type: Refine your search to only Report
open access

In-Core Instrumentation Development Program Quarterly Progress Report June - September 1963

Description: Introduction: The objective of Project Agreement 22 is to determine the feasibility of covering the complete reactor neutron flux start range from 10(3) - 5 x 10(13) nv by using in-core chambers. The counting mode of operating will be used at low neutron fluxes and the root mean square voltage fluctuation mode will be used at high neutron flux levels. Experiments have been run utilizing various ion chambers, gases, gas pressures, voltage, and cables to measure sensitivities and range operating … more
Date: October 1963
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
open access

Prediction of Two-Phase Critical Flow Rate

Description: Technical report of a proposal of an analytical model to predict two-phase critical flow rate. The model is based upon thermal equilibrium, a "lumped" treatment of the two-phase velocity (each phase is represented by a single mean velocity), and upon the neglect of frictional and hydrostatic pressure losses. A comparison, of the proposed predictions with available test results and previous analyses shows that: (1) The present model agrees very well with the published test data. (2) In contrast … more
Date: October 1963
Creator: Levy, S.
Item Type: Refine your search to only Report
open access

Radiological Sciences Department: Quarterly Progress Report, Research and Development Activities, July-September, 1953

Description: This is the sixteenth quarterly report of the research and development activities of the Radiological Sciences Department, Hanford Atomic Products Operation, as before, includes some items charged to control but included for general interest. Such are identified as "not charged to research."
Date: October 2, 1953
Creator: Parker, H. M.
Item Type: Refine your search to only Report
open access

SM-1 Research and Development. Task XV, Zero Power Experiments for SM-1 Core II and SM-1A Core I

Description: Abstract: A zero power experiment on the SM-1 Core II included an element by element reactivity check of fuel elements and control rod absorber sections, and an estimate of burnable nuclear poison loading in stationary fuel elements. An approach to criticality was made by the inverse multiplication method, and critical rod bank position obtained as a function fuel loading up to full core loading. Minimum and maximum core reactivity measurements were obtained by selective loading of stationary f… more
Date: October 12, 1960
Creator: Robinson, R. A.; Weiss, S. H.; McCool, W. J. & Schrader, E. W.
Item Type: Refine your search to only Report
Back to Top of Screen