UNT Libraries Government Documents Department - 1,171 Matching Results

Search Results

Results: 1 - 24 next
open access

The 300 H.P. Benz Aircraft Engine

Description: This report provides a description of the Benz 300 H.P. aircraft engine containing 12 cylinders placed at a 60° angle. It includes a detailed description of the development of the constructional points, particularly the cylinders, pistons, and connecting rods, as well as the engine fitting, lubrication, oil pumps, bearings, oil tank, fuel pump, carburetors, and cooling system. There are seven pages of illustrative figures at the end of the report.
Date: January 1921
Creator: Heller, A.
Item Type: Refine your search to only Report
open access

N.A.C.A. Langley field wind tunnel apparatus: The tilting manometer

Description: A description is given of a tilting manometer designed to meet the requirements of a manometer for use in the wind tunnel at the Langley Memorial Aeronautical Laboratory. This gauge was designed to meet the requirements of a manometer in use in connection with a static pressure plate to indicate the wind speed in the tunnel. The requirements are noted. The sensitivity of the gauge must be made inversely proportional to the pressure to be measured. The gauge must be accurately and quickly set fo… more
Date: January 1921
Creator: Norton, F. H. & Bacon, D. L.
Item Type: Refine your search to only Report
open access

Acceleration Characteristics of R-3350 Engine Equipped with NACA Injection Impeller

Description: From Summary: "Qualitative investigations have shown that use of the NACA injection impeller with the R-3350 engine increases the inertia of the fuel-injection system and, when the standard fuel-metering system is used, this increase in inertia results in poor engine acceleration characteristics. This investigation was therefore undertaken to determine whether satisfactory acceleration characteristics of the engine equipped with the injection impeller could be obtained by simple modifications t… more
Date: January 8, 1947
Creator: Hickel, Robert O. & Snider, William E.
Item Type: Refine your search to only Report
open access

Additional experimental heat-transfer and durability data on several forced-convection, air-cooled, strut-supported turbine blades of improved design

Description: Report presenting an investigation at the Lewis laboratory to develop air-cooled, strut-supported turbine blades. Six blades were investigated in a full-scale turbojet engine to obtain data on blade durability and blade-cooling effectiveness and strut temperature. Results regarding the heat-transfer investigation and blade-durability investigation are provided.
Date: January 19, 1955
Creator: Schum, Eugene F.
Item Type: Refine your search to only Report
open access

Aerial navigation : on the problem of guiding aircraft in a fog or by night when there is no visibility

Description: Report discussing the use of magnetic fields and wire to navigate aircraft in conditions of poor visibility is presented. This field may be considered to be derived from a double lemniscate, considered in the particular case where the origin is a double point formed from the magnetic field of the slack wire, from the field produced by the return currents and from the field due to the currents induced in the conducting mass. These fields are dephased in two ways, one in the direction of the wire… more
Date: January 1922
Creator: Loth, William
Item Type: Refine your search to only Report
open access

An Aerodynamic Analysis of the Autogiro Rotor With a Comparison Between Calculated and Experimental Results

Description: This report presents an extension of the autogiro theory of Glauert and Lock in which the influence of a pitch varying with the blade radius is evaluated and methods of approximating the effect of blade tip losses and the influence of reversed velocities on the retreating blades are developed. A comparison of calculated and experimental results showed that most of the rotor characteristics could be calculated with reasonable accuracy, and that the type of induced flow assumed has a secondary ef… more
Date: January 17, 1934
Creator: Wheatley, John B.
Item Type: Refine your search to only Report
open access

Aerodynamic characteristics at subsonic and transonic speeds of a 42.7 degree sweptback wing model having an aileron with finite trailing-edge thickness

Description: Report presenting an investigation at subsonic and transonic speeds in the high-speed 7- by 10-foot tunnel to determine the aerodynamic characteristics of a 42.7 degree sweptback wing with a 20-percent-chord and 50-percent-span outboard aileron. The investigation was performed in transonic flow over a bump on the tunnel floor and in subsonic flow on one of the tunnel side walls.
Date: January 12, 1949
Creator: Turner, Thomas R.; Lockwood, Vernard E. & Vogler, Raymond D.
Item Type: Refine your search to only Report
open access

Aerodynamic characteristics at supersonic speeds of a series of wing-body combinations having cambered wings with an aspect ratio of 3.5 and a taper ratio of 0.2: Effects of sweep angle and thickness ratio on the aerodynamic characteristics in pitch

Description: Report presenting an investigation in the 4- by 4-foot supersonic pressure tunnel at Mach number 1.60 to determine the effects of sweep and thickness on the longitudinal characteristics of a series of wing-body combinations with cambered wings with an aspect ratio of 3.5 and taper ratio of 0.2. The results show the effects of sweep, thickness, and the horizontal canard surface on the lift, drag, and pitching-moment coefficients and lift-drag ratios. The lift-curve slope, aerodynamic-center loca… more
Date: January 10, 1952
Creator: Robinson, Ross B. & Driver, Cornelius
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics at Transonic Speeds of a Tapered 45 Degree Sweptback Wing of Aspect Ratio 3 Having a Full-Span Flap Type of Control With Overhang Balance: Transonic-Bump Method

Description: From Introduction: "This paper presents the aerodynamic characteristics of low-aspect-ratio sweptback wing having a full-span flap type of control employing an overhanging balance of 50 percent of the flap chord.The main purpose of this investigation was to determine if overhang balances are an effective means of reducing the hinge moments of flap type of controls at transonic speeds."
Date: January 25, 1952
Creator: Lockwood, Vernard E. & Hagerman, John R.
Item Type: Refine your search to only Report
open access

Aerodynamic characteristics at transonic speeds of a wing having a 45 degree sweep, aspect ratio 8, taper ratio 0.45, and airfoil sections varying from the NACA 63A010 section at the root to the NACA 63A006 section at the tip.

Description: Report presenting an investigation in the 7- by 10-foot tunnel to determine the transonic aerodynamic characteristics of a wing with a spanwise variation in thickness ratio. The wings investigated had 45 degrees of sweepback, aspect ratio 8, taper ratio 0.45, and airfoil sections tapered from an NACA 63A010 section at the root chord to an NACA 63A006 section at the tip chord. Results regarding lift characteristics, drag characteristics, and pitching-moment characteristics are provided.
Date: January 15, 1952
Creator: Morrison, William D., Jr. & Fournier, Paul G.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of a Circular Cylinder at Mach Number 6.86 and Angles of Attack Up to 90 Degrees

Description: "Pressure-distribution and force tests of a circular cylinder have been made in the Langley 11-inch hypersonic tunnel at a Mach number of 6.88, a Reynolds number of 129,000, and angles of attack up to 90 degrees. The results are compared with the hypersonic approximation of Grimminger, Williams, and Young and a simple modification of the Newtonian flow theory. An evaluation of the crossflow theory is made through comparison of present results with available crossflow Mach number drag coefficien… more
Date: January 1957
Creator: Penland, Jim A.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of a Flying-Boat Hull Having a Length-Beam Ratio of 15, TED No. NACA 2206

Description: "An investigation was made in the Langley 300 MPH 7- by 10-foot tunnel to determine the aerodynamic characteristics of a flying-boat hull of a length-beam ratio of 15 in the presence of a wing. The investigation was an extension of previous tests made on hulls of length-beam ratios of 6, 9, and 12; these hulls were designed to have approximately the same hydrodynamic performance with respect to spray and resistance characteristics. Comparison with the previous investigation at lower length-beam… more
Date: January 23, 1951
Creator: Riebe, John M. & Naeseth, Rodger L.
Item Type: Refine your search to only Report
open access

Aerodynamic characteristics of a two-blade NACA 10-(3)(062)-045 propeller and of a two-blade NACA 10-(3)(08)-045 propeller

Description: Report discussing characteristics are given for the two-blade NACA 10-(3)(062)-045 propeller and for the two-blade NACA 10-(3)(08)-045 propeller over a range of advance ratio from 0.5 to 3.8, through a blade-angle range from 20 degrees to 55 degrees measured at the 0.75 radius. Maximum efficiencies of the order of 91.5 to 92 percent were obtained for the propellers. The propeller with the thinner airfoil sections over the outboard portion of the blades, the NACA 10-(3)(062)-045 propeller, had l… more
Date: January 1953
Creator: Solomon, William
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of Damping Screens

Description: From Summary: "The experimental investigation of damping screens described herein was undertaken primarily to test theories of the effects of damping screens and to obtain information on the performance of screens in oblique flow. The characteristics investigated include the damping of longitudinal and lateral components of turbulence, the effect of screens on scale, the conditions for the production of turbulence and eddies by screens, and the damping of spatial variations of mean speed."
Date: January 1950
Creator: Schubauer, G. B.; Spangenberg, W. G. & Klebanoff, P. S.
Item Type: Refine your search to only Report
open access

Aerodynamic characteristics of NACA 0012 airfoil section at angles of attack from 0 degrees to 180 degrees

Description: Report presenting the aerodynamic characteristics of the NACA 0012 airfoil section at a range of angles of attack from 0 to 180 degrees. Data were obtained at two different Reynolds numbers depending on whether the airfoil surfaces were smooth or had roughness applied at the leading and trailing edges. After the stall with the rounded edge of the airfoil foremost, a second lift-coefficient peak was obtained at an angle of attack of about 45 degrees.
Date: January 1955
Creator: Critzos, Chris C.; Heyson, Harry H. & Boswinkle, Robert W., Jr.
Item Type: Refine your search to only Report
open access

Aerodynamic Data for a Wing Section of the Republic XF-12 Airplane Equipped With a Double Slotted Flap

Description: Report presenting an investigation in the two-dimensional low-turbulence tunnels for the purpose of developing an optimum flap configuration for maximum lift on an airfoil section for the Republic XF-12 airplane equipped with a double slotted flap. Lift and flap loads were obtained at several flap deflections for two flap paths. Results regarding lift, drag, and flap loads are provided.
Date: January 1946
Creator: Cahill, Jones F.
Item Type: Refine your search to only Report
open access

Aerodynamic Forces and Moments on a Large Ogive-Cylinder Store at Various Locations Below the Fuselage Center Line of a Swept-Wing Bomber Configuration at a Mach Number of 1.61

Description: "A supersonic wind-tunnel investigation on store interference has been conducted in the Langley 4- by 4-foot supersonic pressure tunnel at a Mach number of 1.61. Forces and moments were measured on a large ogive-cylinder store in the presence of a 45 degree swept-wing-fuselage bomber configuration for a number of store locations below the fuselage center line. Results of the investigation show that large variations of store lift, drag, and pitch occur with changes in store or airplane angle of… more
Date: January 14, 1957
Creator: Morris, Odell A.
Item Type: Refine your search to only Report
open access

Aerodynamic interference of slender wing-tail combinations

Description: From Introduction: "In the present paper, the emphasis is placed on calculating the variations of total forces and moments with angles of attack and sideslip for a number of slender plane and cruciform wing-tail combinations and for some airplane-type arrangements of a plane wing and a horizontal and vertical tail."
Date: January 1957
Creator: Sacks, Alvin H.
Item Type: Refine your search to only Report
open access

Aerodynamic Loading Characteristics in Sideslip of a 45 Degree Sweptback Wing With and Without a Fence at High Subsonic Speeds

Description: Report presenting an investigation of the effects of sideslip on the aerodynamic loading characteristics of a 45 degree sweptback wing of aspect ratio 4 for a range of angles of attack, angles of sideslip, and Mach numbers. The load distributions, root bending-moment coefficient, and rolling moment due to sidestep were explored.
Date: January 28, 1955
Creator: Kuhn, Richard E.
Item Type: Refine your search to only Report
open access

Aerodynamic principles of the direct lifting propeller

Description: From Summary: "The purpose of this report is to make the complicated processes on the direct-lift propeller amenable to analysis and observation. This is accomplished by placing the physical phenomena, starting with the most elementary process, in the foreground, while limiting the mathematical treatment to the most essential in view of the fundamental defects of the theorems. Comparison with model experiments supplements and corroborates the theoretical results."
Date: January 1934
Creator: Schrenk, Martin
Item Type: Refine your search to only Report
Back to Top of Screen