UNT Libraries Government Documents Department - 94 Matching Results

Search Results

Results: 1 - 24 next
open access

45-Day safety screen results for single shell tank 241-AP-106, liquid grab samples, riser 1, 30{degrees} and 150{degrees} in conjunction with evaporator campaign 95-1

Description: This is the 45-Day report for the fiscal year 1995 safety screening characterization of three liquid grab samples from single shell tank 241-AP-106. The required analyses are differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and appearance (APPR). No analytes exceeded the notification limits, therefore, secondary analyses (RSST, cyanide, and hot persulfate-total organic carbon) were not required. Summary data tables 2, 3 and 4 present the appearance, DSC and TGA data, … more
Date: December 14, 1994
Creator: Miller, G. L.
Item Type: Refine your search to only Report
open access

2727-S Nonradioactive Dangerous Waste Storage Facility clean closure evaluation report

Description: This report presents the analytical results of 2727-S NRDWS facility closure verification soil sampling and compares these results to clean closure criteria. The results of this comparison will determine if clean closure of the unit is regulatorily achievable. This report also serves to notify regulators that concentrations of some analytes at the site exceed sitewide background threshold levels (DOE-RL 1993b) and/or the limits of quantitation (LOQ). This report also presents a Model Toxics Con… more
Date: July 14, 1994
Creator: Luke, S. N.
Item Type: Refine your search to only Report
open access

ABC Technology Development Program

Description: The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: `Provide a weapon`s grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon`s grade plutonium to be disposed on in [20] years.` This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance th… more
Date: October 14, 1994
Item Type: Refine your search to only Report
open access

Acceptance test plan for the Waste Information Control System

Description: This document describes the acceptance test plan for the WICS system. The Westinghouse Hanford Company (WHC) Hazardous Material Control Group (HMC) of the 222-S Laboratory has requested the development of a system to help resolve many of the difficulties associated with tracking and data collection of containers and drums of waste. This system has been identified as Waste Information and Control System (WICS). The request for developing and implementing WICS has been made to the Automation and … more
Date: September 14, 1994
Creator: Flynn, D. F.
Item Type: Refine your search to only Report
open access

Alaska Power Administration federal power program financial statements with supplementary information September 30, 1993 and September 30, 1992 with auditors` reports thereon

Description: The mission of the Alaska Power Administration is to operate and maintain Alaska`s Federal hydroelectric generation and transmission facilities in an efficient, reliable, safe, and environmentally sensitive manner. The power from the facilities is marketed in a manner so as to repay their federal debt and provide widespread use of the power resources at the lowest cost to consumers consistent with sound business principles. This document presents fiscal 1993 accomplishments, future plans, resul… more
Date: February 14, 1994
Item Type: Refine your search to only Report
open access

Analysis of BY-106 pump pit cover plate

Description: A new cover for the pump pit of Tank 241-BY-106 has been designed to allow the rotary core exhauster to be hooked up without requiring pit entry, riser modification, or equipment removal. The new pit cover is necessary to allow installation of two risers for reducing exposure, contamination, and waste. Computer analysis indicates that the safety margin of the pit cover plate with two risers is adequate. The computer stress model and input files are attached. The pit cover plate is a replacement… more
Date: November 14, 1994
Creator: Coverdell, B. L.
Item Type: Refine your search to only Report
open access

Analysis of lithofacies, petrology/petrography, and porosity/permeability of the lower green river formation: Willow Creek

Description: The 849.16 meter stratigraphic section was measured during consecutive spring field seasons. This section represents the ``lower`` Green River Formation which on the southwest flank of the basin rests stratigraphically above the dominant red beds of the Colton Member of the Green River Formation. The transition from Colton rocks to Green River rocks is gradual in the study area. Petrographic classification and textural analysis has been completed on 33 thin sections. These thin sections represe… more
Date: April 14, 1994
Creator: Morris, T. H.
Item Type: Refine your search to only Report
open access

Analysis of offsite Emergency Planning Zones (EPZs) for the Rocky Flats Plant. Phase 3, Sitewide spectrum-of-accidents and bounding EPZ analysis

Description: During Phase 3 of the EPZ project, a sitewide analysis will be performed applying a spectrum-of-accidents approach to both radiological and nonradiological hazardous materials release scenarios. This analysis will include the MCA but will be wider in scope and will produce options for the State of Colorado for establishing a bounding EPZ that is intended to more comprehensively update the interim, preliminary EPZ developed in Phase 2. EG&G will propose use of a hazards assessment methodology th… more
Date: March 14, 1994
Creator: Petrocchi, A. J. & Zimmerman, G. A.
Item Type: Refine your search to only Report
open access

Analytical Tools to Predict Distribution Outage Restoration Load. Final Project Report.

Description: The main activity of this project has been twofold: (1) development of a computer model to predict CLPU(Cold Load Pickup) and (2) development of a field measurement and analysis method to obtain the input parameters of the CLPU model. The field measurement and analysis method is called the Step-Voltage-Test (STEPV). The Kootenai Electric Cooperative Appleway 51 feeder in Coeur d`Alene was selected for analysis in this project and STEPV tests were performed in winters of 92 and 93. The STEPV dat… more
Date: November 14, 1994
Creator: Law, John
Item Type: Refine your search to only Report
open access

Annual Energy Review 1993

Description: This twelfth edition of the Annual Energy Review (AER) presents the Energy Information Administration`s historical energy statistics. For most series, statistics are given for every year from 1949 through 1993. Because coverage spans four and a half decades, the statistics in this report are well-suited to long-term trend analyses. The AER is comprehensive. It covers all major energy activities, including consumption, production, trade, stocks, and prices, for all major energy commodities, incl… more
Date: July 14, 1994
Item Type: Refine your search to only Report
open access

Atomic structures and compositions of internal interfaces. Progress report, September 1, 1993--August 31, 1994

Description: An atomic scale study was made of the Ag/CdO(222) heterophase interface produced by internal oxidation of a Ag(Cd) alloy, using HREM and atom-probe field-ion microscopy (APFIM). A study was commenced of interfacial segregation at metal/metal oxide interfaces; the system being studied is the Cu(Ag)/MgO(222) heterophase interface, where Ag is the segregating species. A study was made of the necessary conditions to measure the oxygen content in MgO precipitates produced by internal oxidation of Cu… more
Date: June 14, 1994
Creator: Seidman, D. N. & Merkle, K. L.
Item Type: Refine your search to only Report
open access

Beam Profile Monitor Data Analysis

Description: In the AGS to RHIC transfer line beam profile monitors employing phosphor screens will be used to measure two dimensional beam profile and derive the beam emittance and Twiss parameters. This note present the details as well as summarizes the planned analysis.
Date: October 14, 1994
Creator: P., Zhou
Item Type: Refine your search to only Report
open access

Breathing air trailer acceptance test procedure

Description: This Acceptance Test Procedure (ATP) will document compliance with the requirements of WHC-S-0251 Rev. 0 and ECNs 613530 and 606113. The equipment being tested is a Breathing Air Supply Trailer purchased as a Design and Fabrication procurement activity for use in the core sampling program. The ATP was written by the Seller and will be performed by the Seller with representatives of the Westinghouse Hanford Company witnessing the test at the Seller`s location. This test procedure is to verify th… more
Date: September 14, 1994
Creator: Kostelnik, A. J.
Item Type: Refine your search to only Report
open access

As-built design criteria: B-234 cathodic protection, C.P. wire to pipe connections

Description: This document presents the as-built conditions (cathodic protection wire connections to miscellaneous underground piping) that do not otherwise exist on the current {open_quotes}Released for Construction{close_quotes} design drawings. A note will be added to each applicable drawing, referencing this support document.
Date: November 14, 1994
Creator: Brezler, T. A.
Item Type: Refine your search to only Report
open access

CASIM input parameters for various materials

Description: During the past year, the computer program CASIM has been placed in a common area from which copies can be obtained by a wide array of users. The impetus for this arrangement was the need to have a standard code that could be maintained and transported to other platforms. In addition, an historical record would be kept of each version as the program evolved. CASIM requires a series of parameters (input by the user) that describe the medium in which the cascade develops. Presently a total of 9 m… more
Date: July 14, 1994
Creator: Malensek, A. J. & Elwyn, A. J.
Item Type: Refine your search to only Report
open access

Characterization of TNAZ

Description: The explosive TNAZ has recently become available in pilot-plant quantities. We have found its small-scale safety properties similar to those of other nitramines. Detonation calorimetry showed TNAZ to have 96% the energy of HMX and 150% of TNT. The shock sensitivity of neat TNAZ is greater than LX-14. A retonation wave was observed when the material was shocked at 2.0 GPa. The initiation behavior of neat TNAZ cannot be classified as either homogeneous or heterogeneous. Six plastic bonded TNAZ-ba… more
Date: December 14, 1994
Creator: Simpson, R. L.; Garza, R. G.; Foltz, M. F.; Ornellas, D. L. & Utriew, P. A.
Item Type: Refine your search to only Report
open access

Configuration management program plan for Hanford site systems engineering

Description: This plan establishes the integrated configuration management program for the evolving technical baseline developed through the systems engineering process. This configuration management program aligns with the criteria identified in the DOE Standard, DOE-STD-1073-93. Included are specific requirements for control of the systems engineering RDD-100 database, and electronic data incorporated in the database that establishes the Hanford site technical baseline.
Date: November 14, 1994
Creator: Hoffman, A. G.
Item Type: Refine your search to only Report
open access

Design criteria document, Fire Protection Task, K Basin Essential Systems Recovery, Project W-405

Description: The K Basin were constructed in the early 1950`s with a 20 year design life. The K Basins are currently in their third design life and are serving as a near term storage facility for irradiated N Reactor fuel until an interim fuel storage solution can be implemented. In April 1994, Project W-405, K Basin Essential Systems Recovery, was established to address (among other things) the immediate fire protection needs of the 100K Area. A Fire Barrier Evaluation was performed for the wall between th… more
Date: December 14, 1994
Creator: Johnson, B. H.
Item Type: Refine your search to only Report
open access

Design criteria document, Maintenance Shop/Support Facility, K-Basin Essential Systems Recovery, Project W-405

Description: During the next 10 years a substantial amount of work is scheduled in the K-Basin Area related to the storage and eventual removal of irradiated N-Reactor fuel. Currently, maintenance support activities are housed in existing structures that were constructed in the early 1950`s. These forty-year-old facilities and their supporting services are substandard, leading to inefficiencies. Because of numerous identified deficiencies and the planned increase in the numbers of K-Basin maintenance person… more
Date: December 14, 1994
Creator: Strehlow, M. W. B.
Item Type: Refine your search to only Report
open access

Engineering development of advanced coal-fired low-emission boiler system. Technical progress report No. 3, April--June 1993

Description: The ``Draft Design Uncertainties Analysis`` was submitted June 18, 1993. The purpose of the Design Uncertainties Analysis was to identify key design uncertainties of the subsystem technologies that were described in the Concept Selection Report. The analysis builds directly on analysis of the subsystems, as identified in the Concept Selection Report, and serves as a prerequisite for the preparation of the R, D&T Plan -- Task 4. Analysis of the subsystem technologies showed that uncertainties ex… more
Date: January 14, 1994
Item Type: Refine your search to only Report
open access

Engineering work plan for PFP criticality alarm panel first unit re-build

Description: This document describes the first step in increasing the quality, reliability, and ease of maintenance of the nine Criticality Alarm Panels (CAP) at PFP. Development control practices and guidelines of WHC-CM-6-1, EP-2.4 and WHC-IP-1026, EPG-2.4 are applied to develop a prototype of a replacement Criticality Alarm Panel (CAP) with facility-use potential. During the development of the prototype CAP, the design requirements of all of PFP`s nine CAPs are considered to develop standardized hardware… more
Date: September 14, 1994
Creator: Clem, W. E.
Item Type: Refine your search to only Report
Back to Top of Screen