UNT Libraries Government Documents Department - 2,542 Matching Results

Search Results

open access

1/2 Sintering of Mullite-Containing Materials: I. Effect of Composition

Description: Sintering behavior of mullite-containing powders was studied over a range of chemical compositions (Al{sub 2}O{sub 3}/SiO{sub 2} ratio). Densification measurements were made for both liquid phase-containing and solid state systems. Small amounts of liquid phase were observed to have a significant effect on densification rate. A linear relationship was obtained between the percent of theoretical density and the logarithm of time for compositions in the range 73-75 wt% Al{sub 2}O{sub 3}. Currentl… more
Date: December 1, 1981
Creator: Sacks, Michael D. & Pask, Joseph A.
open access

3. 6 simplified methods for design

Description: Simplified design analysis methods for elevated temperature construction are classified and reviewed. Because the major impetus for developing elevated temperature design methodology during the past ten years has been the LMFBR program, considerable emphasis is placed upon results from this source. The operating characteristics of the LMFBR are such that cycles of severe transient thermal stresses can be interspersed with normal elevated temperature operational periods of significant duration, … more
Date: January 1, 1981
Creator: Nickell, R.E. & Yahr, G.T.
open access

3-megajoule heavy-ion fusion driver

Description: The initiation of inertial confinement fusion reactions with a heavy ion particle beam has been under intensive study since 1976, and the progress of this study is principally documented in the proceedings of annual workshops held by US National Laboratories. At this time a 3MJ, 150 TW, ion beam is a good choice to initiate microexplosions with energy gain of 100. The Lawrence Berkeley Laboratory has made systems studies based on a Linear Induction Accelerator to meet the beam requirements. The… more
Date: June 1, 1981
Creator: Faltens, A.; Hoyer, E. & Keefe, D.
open access

10-joule high-voltage trigger micro Marx

Description: A low energy Marx generator makes a convenient trigger for various spark gaps. With an output around 200 kV and a risetime less than 2 ns, the micro-Marx can multichannel field distortion gaps or fire a number of gaps without much gap-to-gap isolation. This design features small size, low cost, and good triggering characteristics. The complete unit is shown.
Date: January 1, 1981
Creator: Platts, D. A.
open access

10-kA pulsed power supply for superconducting coils

Description: A new 4-MW inductor-converter bridge (ICB) for supplying power to pulsed superconducting magnets is under construction at Argonne National Laoratory. This is a second-generation ICB built at Argonne Lab. The analytical, design, and control techniques developed for the first prototype have been used in the design of the new system. The paper presents the important considerations in the design of the new ICB. A brief description of the operation of the circuit is also given.
Date: January 1, 1981
Creator: Ehsani, M.; Fuja, R. E. & Kustom, R. L.
open access

28-nm laser damage testing of LIF

Description: We have tested several samples of LIF, both single crystal and press forged, for damage resistance to 10-ns 248-nm pulses at 35 pps. The damage thresholds - the highest levels at which no damage could be produced - ranged from 4 to 6 J/cm/sup 2/ although some test sites survived irradiation at approx. 30 J/cm/sup 2/. We observed that bulk damage is the primary failure mechanism in single crystal and press forged samples and that both types exhibit the same resistance to laser damage.
Date: January 1, 1981
Creator: Foltyn, S. R. & Newman, B. E.
open access

30-kV Proton Injector for PIGMI

Description: A 30-kV proton injector designed for matching a 31-mA proton beam into the radio-frequency quadrupole (RFQ) section of the PIGMI accelerator has been constructed and tested. This injector uses a small efficient duoplasmatron ion source and a single-gap extraction system for creating a convergent ion beam, and a three-element unipotential einzel lens for focusing the ion beam into the RFQ. A description of this prototype injector is presented, along with the experimental data obtained during the… more
Date: January 1, 1981
Creator: Hamm, R. W.; Mueller, D. W. & Sturgess, R. G.
open access

30-MJ superconducting magnetic energy storage for BPA transmission-line stabilizer

Description: The Bonneville Power Administration operates the transmission system that joins the Pacific Northwest and southern California. A 30 MJ (8.4 kWh) superconducting Magnetic Energy Storage (SMES) unit with a 10 MW converter can provide system damping for low frequency oscillations. The unit is scheduled to operate in late 1982. Progress to date is described. The coil is complete. All major components of the electrical and cryogenic systems have been received and testing has begun. Computer control … more
Date: January 1, 1981
Creator: Schermer, R.I.
open access

30-MJ superconducting magnetic-energy storage for BPA transmission-line stabilizer

Description: The Bonneville Power Administration operates the transmission system that joins the Pacific Northwest and southern California. A 30 MJ (8.4 kWh) Superconducting Magnetic Energy Storage (SMES) unit with a 10 MW converter can provide system damping for low frequency oscillations. The unit is scheduled to operate in 1982. Progress during FY 81 is described. The coil is complete. All major components of the electrical and cryogenic systems have been received and testing has begun. Computer control … more
Date: January 1, 1981
Creator: Schermer, R. I.
open access

30-MJ superconducting magnetic energy storage for electric-transmission stabilization

Description: The Bonneville Power Administration operates the electric power transmission system that connects the Pacific Northwest and southern California. The HVAC interties develop 0.35 Hz oscillations when the lines are heavily loaded. A 30 MJ (8.4 kWh) Superconducting Magnetic Energy Storage (SMES) unit with a 10 MW converter can provide system damping for the oscillation. The unit is scheduled for installation in 1982 and operation in 1982-83. Status of the project is described. The conductor has bee… more
Date: January 1, 1981
Creator: Turner, R. D. & Rogers, J. D.
open access

100-kV, 2-ns risetime, dc-coupled probe

Description: A high-voltage probe has been designed and constructed; it is unique because it may be used for both high-voltage dc and for transient measurements. The probe is rated at 100-kV dc with a short transient rating of 150-kV peak. System risetime is less than 2 ns. The input impedance is 1000 M..cap omega.. shunted by 13 pF. A distributed RC network providing the desired attenuation is housed in a 25.4-cm-dia cylindrical housing. A 15.2-m length of coaxial cable connects the probe to a termination … more
Date: January 1, 1981
Creator: Power, J.; Nunnally, W. & Young, D.
open access

300-MHz optical discriminator-counter

Description: The prediction of future CO/sub 2/ content in the atmosphere is not completely credible because the oceanographers and terrestrial ecologists do not agree on the global CO/sub 2/ balance. Very precise measurements of O/sub 2//N/sub 2/ ratio using Raman scattering over a few years' period could provide important information and lead to the explanation of the disparity in the atmospheric CO/sub 2/ balance. An optical discriminator-counter has been developed to count closely spaced optical events … more
Date: July 1, 1981
Creator: Turko, B. & Lo, C.C.
open access

360/sup 0/ digital phase detector with 100-kHz bandwidth

Description: The general availability of digital circuit components with propagation delay times of a few nanoseconds makes a digital phase detector with good bandwidth feasible. Such a circuit has a distinct advantage over its analog counterpart because of its linearity over wide range of phase shift. A phase detector that is being built at Los Alamos National Laboratory for the Fusion Materials Irradiation Test (FMIT) project is described. The specifications are 100-kHz bandwidth, linearity of +- 1/sup 0/… more
Date: January 1, 1981
Creator: Reid, D.W.; Riggin, D.; Fazio, M.V.; Biddle, R.S.; Patton, R.D. & Jackson, H.A.
open access

870. 8-keV gamma ray from PuO₂

Description: A /sup 252/Cf neutron source and an /sup 241/Am alpha source were used with isotopically enriched water containing 43.9% /sup 17/O and 43.1% /sup 18/O, to study the (n,n'UPSILON) and (..cap alpha..,..cap alpha..'UPSILON) reactions in /sup 17/O and /sup 18/O. The production yields for the 870.8-keV gamma ray from /sup 17/O and the 1982.2-keV gamma ray from /sup 18/O were measured. In addition, the average cross sections over the /sup 252/Cf fission neutron spectrum for /sup 17/O(n,n'UPSILON)/sup… more
Date: January 1, 1981
Creator: Hsu, H.H.
open access

1963 revisited: should we set a precedent of recalculating old exposures

Description: This paper describes recent experience in re-evaluating the dose to an employee. This employee was plagued with skin disorders for years, but he questioned his recorded beta dose only after a recent LLNL cancer study began collecting data. He was concerned that his radiation dose recorded during the time he worked on a fission burst reactor experiment in 1963 did not represent the actual dose he received. About six months were spent gathering information, putting the information together, makin… more
Date: October 26, 1981
Creator: Hoots, S.S.
open access

Aberrations and focusability in large solid-state-laser systems

Description: Solid state lasers for fusion experiments must reliably deliver maximum power to small (approximately .5 mm) targets from stand-off focal distances of 1 m or more. This requirement places stringent limits upon the optical quality of the several major components - amplifiers, Faraday isolators, spatial filters - in each amplifier train. Residual static aberrations in optical components are transferred to the beam as it traverses the optical amplifier chain. Although individual components are typ… more
Date: January 1, 1981
Creator: Simmons, W.W.
open access

Absorption spectra of AgI at pressures to 136 kbar

Description: Spectral absorption measurements in AgI are reported at pressures up to 136 kbar using a diamond anvil cell. In the NaCl phase between 5 and 70 kbar the absorption edge shift is found to be nearly linear with pressure. No indication of a sudden jump into a CsCl phase is found near 100 kbar and the possible influence of larger pressure gradients in earlier measurements is discussed.
Date: January 1, 1981
Creator: Liebenberg, D.H. & Hudson, J.
open access

Absorption spectrophotometric characterization of Sm(II), Sm(III), and Sm(II/III) bromides and Sm(III) oxybromide in the solid state

Description: Absorption spectra obtained from SmBr/sub 3/, SmBr/sub 2/, and Sm0Br were used in identifying the samarium species in several mixed-valence Sm(II/III) compounds produced by H/sub 2/ reduction of SmBr/sub 3/. The nature of the absorption of Sm0Br made it possible to detect even traces of Sm0Br in the Sm bromides.
Date: June 15, 1981
Creator: Wood, A. B.; Young, J. P.; Peterson, J. R. & Haschke, J. M.
open access

Acceleration of polarized protons in the Brookhaven AGS

Description: A multi-laboratory-university collaborative project involving Argonne, Brookhaven, Michigan, Rice and Yale is underway to accelerate polarized protons at the AGS. The success of the now turned off 12 GeV/c ZGS polarized beam and the design studies for the AGS made us confident of the feasibility of achieving a polarization of about 60% at 26 GeV/c with an intensity 10/sup 11/ to 10/sup 12/ protons/pulse. Such a beam would be a potential source of polarized protons for ISABELLE. This report give… more
Date: January 1, 1981
Creator: Terwilliger, K.M.; Crabb, D.G. & Krisch, A.D.
open access

Acceleration of /sup 14/C beams in electrostatic accelerators

Description: Operational problems in the production and acceleration of /sup 14/C beams for nuclear structure research in Los Alamos National Laboratory's Van de Graaff accelerators are discussed. Methods for the control of contamination in ion sources, accelerators and personnel are described. Sputter source target fabrication techniques and the relative beam production efficiencies of various types of bound particulate carbon sputter source targets are presented.
Date: January 1, 1981
Creator: Rowton, L. J. & Tesmer, J. R.
open access

Accelerator power concepts using iolated transmission lines

Description: The rationale and the advantages of using multiple transmission-line sections isolated by transit time and inductance in accelerating high-current (approx. = 10 kA), short-pulse (less than or equal to 100 ns) particle beams to the multimegavolt level is outlined. The main advantages of this system include reducing the number of output switches required per output pulse by nearly an order of magnitude over conventional systems and increasing the system capability for repetition-rate operation. T… more
Date: January 1, 1981
Creator: Nunnally, W.C.
Back to Top of Screen